Graphite/Epoxy 적층복합재의 층간파괴 향상을 위한 프리프레그의 전처리 연구

A Study on the Prepreg Treatment to Improve Interlaminar Fracture Behavior of Graphite/Epoxy Composites

  • 김민호 (경희대학교 일반대학원) ;
  • 이경엽 (경희대학교 테크노공학대학 기계산업시스템공학부) ;
  • 백영남 (경희대학교 테크노공학대학 기계산업시스템공학부) ;
  • 김현주 (강원도 고성군 죽왕면 해양심층수연구센터) ;
  • 정동호 (강원도 고성군 죽왕면 해양심층수연구센터)
  • 발행 : 2006.10.01

초록

In this study, the graphite/epoxy prepregs were surface-treated using oxygen plasma, and optimal treatment time was determined measuring the contact angle on the prepreg surface. Interlaminar fracture behavior of surface-treated graphite/epoxy composites was compared with that of regular (untreated) graphite/epoxy composites. The results showed that the contact angle was a minimum when treated for 30 minutes. The interlaminar fracture toughness of surface-treated specimen was improved about 15% compared with that of regular specimen.

키워드

참고문헌

  1. Kujawski, D., 'Width effects on the tensile strength and fatigue behavior of angle-ply laminates,' International J of Fatigue, Vol. 20, No.8. pp 575-780, 1998 https://doi.org/10.1016/S0142-1123(98)00033-4
  2. Pereira, A. B.. de Morais, A. B., Marques, A. T. and de Castro, P.T., 'Mode I interlaminar fracture of carbon/epoxy multidirectional laminates,' Composite Science and Technology. Vol. 64, No 13-14, pp. 2261-2270. 2004 https://doi.org/10.1016/j.compscitech.2004.03.001
  3. Moon, S. I. and Jang, J., 'The mechanical interlocking and wetting at the interface between argon plasma treated UHMPE fiber and vinylester resin.' J. of Mat. Sci, Vol. 34, pp. 4219-4224, 1999 https://doi.org/10.1023/A:1004642500738
  4. Sun, X. Y., Zhou, L. P., Lin, L. W., Li, D. Y. and Li, S. L., 'Effect on the adhesion of CVD diamond films to cemented carbide substrate by acid etching and decarburization method,' J. of Synthetic Crystals. Vol. 33, No. 6, pp. 969-973, 2004
  5. Hozumi, A., Shirahata, N., Nakanishi, Y., Asakura, S. and Fuwa, A., 'Wettability control of a polymer surface through 126 nm vacuum ultraviolet light irradiation,' J. of Vacuum Science & Technology A, Vol. 22, No.4, pp. 1309-14, 2004 https://doi.org/10.1116/1.1701867
  6. Mohanty, A. K., Drzal, L. T. and Misra, M., 'Novel hybrid coupling agent as an adhesion promoter in natural fiber reinforced powder polypropylene composites,' J. of Materials Sci Letters, Vol. 21, No. 23, pp. 1885-1888, 2002 https://doi.org/10.1023/A:1021577632600
  7. Brinke, J. W., Debnath, S. C., Reuvekamp, L. A. E. M. and Noordermeer, J. W. M.. 'Mechanistic aspects of the role of coupling agents in silica-rubber composites,' Composites Science and Technology, Vol. 63, No.8, pp. 1165-1174, 2003 https://doi.org/10.1016/S0266-3538(03)00077-0
  8. Dhayal, M., Parry. K. L., Short, R. D. and Bradley, J. W., 'Investigating the plasma surface modification of polystyrene at low ion power densities,' J. of Physical Chemistry B, Vol. 108, No. 37. pp. 14000-14004, 2004 https://doi.org/10.1021/jp0477046S1089-5647(04)07704-1
  9. Koh, S. K., Cho, J. S. Kim, K. H., Han, S. and Beag, Y. W., 'Altering a polymer surface chemical structure by an ion-assisted reaction,' J Adhesion Sci. Tech. Vol. 16, No 2, pp. 129-142, 2002 https://doi.org/10.1163/156856102317293669
  10. ASTM D5528-94a. 'Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix composites,' ASTM Standards. Vol. 14. No 2. pp. 280-288. 1998