한국소음진동공학회논문집 (Transactions of the Korean Society for Noise and Vibration Engineering)

  • 제16권5호
  • /
  • Pages.529-536
  • /
  • 2006
  • /
  • 1598-2785(pISSN)
  • /
  • 2287-5476(eISSN)
한국소음진동공학회 (The Korean Society for Noise and Vibration Engineering)
권호 표지
DOI QR코드

DOI QR Code

동흡진기를 사용한 광 디스크 드라이브의 진동저감

Vibration Reduction of an Optical Disk Drive with a Dynamic Vibration Absorber

  • 김남웅 (서울대학교 대학원 기계항공공학부) ;
  • 신효철 (서울대학교 기계항공공학부) ;
  • 김국원 (순천향대학교 기계공학과)
  • 발행 : 2006.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In high-speed optical disk drive, the excitation caused by rotation of a mass-unbalanced disk is a major source of vibration. The vibration can be a disturbance to the servo system, which is sufficient to cause severe failures in the reading and writing process. The vibration also causes users to feel unpleasantness. The vibration reduction is therefore essential for the reliable operation of optical disk drive. One of the approaches to reduce the vibration is a dynamic vibration absorber(DVA). In this paper, we analyze the dynamic behavior of $DVD{\pm}RW$ combo drive system with DVA through 12-dof rigid multi-body dynamic model. The effective location and the optimal frequency ratio for the DVA are obtained from the analysis. The DVA are fabricated based on the analysis and its usefulness is confirmed.

키워드

참고문헌

  1. Kim, N. W., Kim, K. W., Lim, J. R. and Kim, W. Y., 1999, 'Numerical Simulation and Experiment of an Antivibration Design of Slim Optical Disk Drive,' Journal of Information Storage and Processing Systems, Vol. 1, pp. 351-356
  2. Chung, J. and Ro, D.-S., 2000, 'Dynamic Analysis of an Automatic Dynamic Balancer,' Journal of Sound and Vibration Vol. 231, No.2, pp. 375-391 https://doi.org/10.1006/jsvi.1999.2718
  3. Lee, D. J., Chung, J. T. and Ro, D. S., 1999, 'Vibration Reduction of an Optical Disk Drive Using an Automatic Ball Balancer,' Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 9, No.2, pp. 355-362
  4. DenHartog, J. P., 1956, Mechanical Vibrations, 4th Edition McGraw Hill
  5. Chung, J., 2004, 'Vibration Absorber for Reduction of the In-plane Vibration in an Optical Disk Drive,' IEEE Trans. On Consumer Electronics, Vol. 50, No.2, pp. 552-557 https://doi.org/10.1109/TCE.2004.1309422
  6. Heo, J. W., Chung, J. and Park, J. M., 2002, 'Vibration and Noise Reduction of an Optical Disk Drive Using a Vibration Absorber,' IEEE Trans. On Consumer Electronics, Vol. 48, No.4, pp, 874-878 https://doi.org/10.1109/TCE.2003.1196415
  7. Kang, B. J., Chung, T. E., Sin, H. C. and Oh. J.H., 2004, 'A Study on Vibration Reduction of an Optical Disk Drive with the Misaligned Axis of Rotation,' Journal of KSPE, Vol. 21, No.5, pp. 122-130
  8. Kim, N. W., Kim, K. W., Lim, J. R. and Ahn, T.K, 2001, 'Dynamic Characteristics Prediction of Rubber Mounts for Anti-vibration of an Optical Disk Drive,' Journal of KSPE, Vol. 18, No. 12, pp. 104-109
  9. Kim, K. W. and Kim, N. W., 2002, 'Prediction of Dynamic Characteristics of Rubber Mount for Anti-vibration,' Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 12, No.9, pp. 661-667 https://doi.org/10.5050/KSNVN.2002.12.9.661