DOI QR코드

DOI QR Code

Decomposition of Shear Resistance Components in Reinforced Concrete Beams

철근콘크리트 보의 전단저항 성분 분해

  • Rhee, Chang-Shin (Dept. of Civil Engineering, Chonnam National University) ;
  • Shin, Geun-Ok (Dept. of Civil Engineering, Chonnam National University) ;
  • Kim, Woo (Dept. of Civil Engineering, Chonnam National University)
  • 이창신 (전남대학교 토목공학과) ;
  • 신근옥 (전남대학교 토목공학과) ;
  • 김우 (전남대학교 토목공학과)
  • Published : 2006.12.31

Abstract

The objective of the present study is to verify the validity of a new truss model for evaluating the contribution by arch action to shear resistance in shear-critical reinforced concrete beams. The new truss model is based on the relationship between shear and bending moment in a beam subjected to combined shear and bending. The compatibility condition of the shear deformation that deviates from Bernoulli bending plane is formulated utilizing the smeared truss idealization with an inclined compression chord. The Modified Compression Filed Theory is employed to calculate the shear deformation of the web, and the relative axial displacements of the compression and the tension chord by the shear flow are also calculated. From this shear compatibility condition in a beam, the shear contribution by the arch action is numerically decoupled. Then the validity of the model is examined by applying the model to some selected test beams in literatures. On the basis of the analytical results, the contribution by the web to shear resistance can be constant and have an excellent linear correlation with the web reinforcement ratio. The present decoupling approach may provide a simple way for the assessment of the role of each parameter or mechanism that affects the ultimate shear behavior of reinforced concrete beams.

본 연구의 목적은 휨과 전단에 지배받는 철근콘크리트 보에서 아치작용에 의한 전단기여성분을 평가하기 위한 새로운 해석 모델의 적용성을 검증하기 위한 것이다. 새로운 모델은 전단력은 휨모멘트의 변화율이라는 관계식을 기초로, 분산트러스 이상화 기법을 이용하여 횡단면에서 베르누이(Bernoulli) 휨 평면으로부터 전단변형적합조건을 새롭게 유도하였으며, MCFT와 분산트러스 이상화를 통해 전단흐름에 의한 복부전단요소의 전단곡률을 일치시키는 전단변형적합조건을 수립하였다. 전단변형적합조건을 이용하면, 보 전단거동은 타이드아치작용과 보작용의 두 성분으로 수치적 분해 될 수 있다. 이러한 분리 접근법의 유효성은 기존 문헌에 수록된 활용 가능한 실험 자료를 통해 검증하였다. 수행 결과 실제 측정 전단강도와 비교하였을 때 복부가 분담하는 전단강도는 훨씬 일정하며, 역학적 복부철근비와 훌륭한 선형 상관관계에 있는 것으로 나타났다. 새로운 해석 모델은 철근콘크리트 부재의 전단 거동에 영향을 미치는 각 변수나 메커니즘을 합리적으로 설명할 수 있는 모델이라고 할 수 있겠다.

Keywords

References

  1. ASCE-ACI Committee 426, 'The Shear Strength of Reinforced Concrete Members', Journal of Structural Division, ASCE, Vol.99, No.6, 1973, pp.1091-1187
  2. 한국콘크리트학회, 콘크리트 구조설계기준, 한국콘크리트학회, 2003, pp.145-198
  3. ACI Committee 318, Building Code Requirement for Reinforced Concrete and Commentary (318R-99), ACI, Detroit, M.I. 1999, 391pp
  4. AASHTO, Bridge Design Specifications, SI Units, Third edition, American Association of State Highway and Transportation Officials, Washington, D.C., 2004, pp.5-52-74
  5. Eurocode2, Design of Concrete Structures-Part I, General Rules and Rules for Buildings, British Standard Institution, London, 1992, pp.629-669
  6. 김 우, 이창신, 정제평, '전단변형적합조건에 기반한 철근콘크리트 부재의 전단 해석 모델', 콘크리트학회논문집, 18권, 3호, 2006, pp.379-388 https://doi.org/10.4334/JKCI.2006.18.3.379
  7. Taylor, H. P. J., 'The Fundamental Behavior of Reinforced Concrete Beams in Bending and Shear', ACI SP-42, Detroit, M.I., 1974, pp.43-77
  8. Leonhardt, F., 'Reducing the Shear Reinforcement in Reinforced Concrete Beams and Slabs', Magazine of Concrete Research, Vol.17, No.53, December 1965, pp.187-198 https://doi.org/10.1680/macr.1965.17.53.187
  9. Placas, A. and Regan, P. E., 'Shear Failure of Reinforced Concrete Beams', ACI Journal, Vol. 68, No.10, Oct. 1971, pp.763-773
  10. Xie, Y., Ahmad, S. H., Yu, T., Hino, S., and Chung, W., 'Shear Ductility of Reinforced Concrete Beams of Normal And High-Strength Concrete', ACI Structural Journal, Vol.91, No.2, Mar.-Apr. 1994, pp.140-149
  11. Kani, G N. J., 'Basic Facts Concerning Shear Failure', ACI Journal, Vol.63, No.3, 1966, pp.675-692
  12. EI-Sayed, A. K., El-Salakawy, E. F., and Benmokrane, B., 'Shear Strength of FRP-Reinforced Concrete Beams without Transverse Reinforcement', ACI Structural Journal, Vol.103, No.2, Mar-Apr, 2006, pp.235-243
  13. EI-Sayed, A. K., El-Salakawy, E. E, and Benmokrane, B., 'Shear Capacity of High-Strength Concrete Beams Reinforced with FRP Bars', ACI Structural Journal, Vol.103, No.3, May-June 2006, pp.383-389
  14. McGormley, J. C., Creary, D/B., and Ramirez, J. A., 'The Performance of Epoxy-Coated Shear Reinforcement', ACI Structural Journal, Vol.93, No.5, Sept.-Oct. 1996, pp.531-537
  15. Kong, P. Y. L., and Rangan, B. V., 'Shear Strength of High-Performance Concrete Beams', ACI Structural Journal, Vol.95, No.6, Nov.-Dec. 1998, pp.677-688
  16. Zararis, P. D. and Papadakis, G., 'Influence of the Arrangement of Reinforcement on the Shear Strength of RC Beams', Proceedings of the 13th Hellenic Conference on Concrete, Rethymnon, Greece, Vol.1, 1999, pp.110-119
  17. Bresler, B. and Scodelis, A. C., 'Shear Strength of Reinforced Concrete Beams', ACI Structural Journal, Vol.60, No.1, Jan. 1963, pp.51-74
  18. Mphonde, A. G. and Frantz, G. C., 'Shear Tests of High- and Low-Strength Concrete Beams with Stirrups', High-Strength Concrete, SP-87, H. G Russell, ed., American Concrete Institute, Farmington Hills, Mich., 1985, pp.179-196
  19. Elzanty, A. H., Nilson, A. H., and Slate, F. O., 'Shear Capacity of Reinforced Concrete Beams Using High-Strength Concrete', ACI Journal, Vol.83, No.2, Mat-Apr, 1986, pp.290-296
  20. Johnson, M. K. and Ramirez, J. A., 'Minimum Shear Reinforcement in Beams with Higher Strength Concrete', ACI Structural Journal, Vol.86, No.4, July-Aug, 1989, pp.376-382
  21. Yoon, Y., Cook, W.D., and Mitchell, D., 'Minimum Shear Reinforcement in Normal-Medium, and High-Strength Concrete Beams', ACI Structural Journal, Vol.93, No.5, Sept.-Oct. 1996, pp.576-584
  22. Ozcebe, G., Ersoy, D., and Tankut, T., 'Evaluation of Minimum Shear Reinforcement Requirements for HigherStrength Concrete', ACI Structural Journal, Vol.96, No.3, May-June 1999, pp.361-368
  23. Chien-Hung Lin and Wen-Chili Lee, 'Shear Behavior of High-Workability Concrete Beams', ACI Structural Journal, Vol.100, No.5, Sept.-Oct. 2003, pp.599-608
  24. Rahal, K. N. and Al-Shaleh, K. S., 'Minimum Transverse Reinforcement in 65MPa Concrete Beams', ACI Structural Journal, Vol.101, No.6, Nov.-Dec. 2004, pp.872-878
  25. Anderson, N.S. and Ramirez, J. A., 'Detailing of Stirrup Reinforcement', ACI Structural Journal, Vol.86, No.5, Sept.-Oct. 1989, pp.507-515
  26. Roller, J. J. and Russell, H. G., 'Shear Strength of High-Strength concrete Beams with Web Reinforcement', ACI Structural Journal, Vo1.87, No.2, Man.-Apr. 1990, pp.191-198