초록
최근 고강도철근 및 프리스트레싱에 의한 유용성은 경제적이고 효과적으로 콘크리트 구조설계를 가능하게 되었다. 이러한 구조적 부재를 다루는 구조기술자가 직면하는 중요한 문제중 하나는 한계상태설계에서 사용성에 대한 기준으로 사용되는 균열폭의 제어이다. 특히 휨균열은 하중을 부담하는 부재에 대해서 안전성의 확보 및 사용성과 연성을 향상될 수 있도록 제어되어야 한다. 본 논문에서 제안된 방법은 Ikki에 의해서 수행된 양측인장시험법의 시험 결과를 이용하고 있다. 양측인장상태에서 이형철근에 대한 부착특성은 콘크리트면적과 리브면적에 의해서 고려된다. 제안된 방법에 의한 결과는 시험 결과와 비교되며, 기존 방법보다도 치수 및 단면제원의 변화, 철근의 방향을 고려하여 보다 정밀한 부착응력과 이에 대한 상대슬립의 관계를 제시한다. 부착특성은 무차원적 슬립량과 유효철근비에 의해서 고려된다. 제안식의 유효성은 시험체 실험자료에 의해서 검증되어진다.
In recent years, the availability of high-strength reinforcing and prestressing steels leads us to build economically and efficiently designed concrete structural members. One of critical problems faced to the structural engineers dealing with these types of structural member is controls of crack width that is used as a criterion for the serviceability in the limit state design. Especially, flexural cracking must be controlled to secure the structural safety and to improve the durability as well as serviceability of the load carving members. The proposed method utilizes the results of pure tension test in which tensile loads are applied both side of specimen, done by Ikki. The bond characteristics of deformed reinforcing bar under pure tension is considered by the area of concrete and rib area. The results of proposed method are compared with the test data and the results show that the proposed method can take into account the dimensions, variation of sectional properties, and direction of reinforcing and gives more accurate maximum bond stress and corresponding relative slip than the existing methods. the characteristics of bonding is considered by using dimensionless slip magnitude and effective reinforcement ratio. The validity of the proposed equation is verified by test experimental data.