DOI QR코드

DOI QR Code

Evaluation of Wet-Mixed High Strength Sprayed Polymer Mortar for Fire Resistance

내화용 고강도 습식 스프레이 폴리머 모르타르의 화재 저항성 평가

  • Won, Jong-Pil (Dept. of Civil & Environmental System Engineering, Konkuk University) ;
  • Choi, Seok-Won (Dept. of Civil & Environmental System Engineering, Konkuk University) ;
  • Park, Chan-Gi (Dept. of Civil & Environmental System Engineering, Konkuk University) ;
  • Park, Hae-Kyun (Samsung Corporation Engineering & Construction Group, Civil Engineering Technology Team)
  • 원종필 (건국대학교 사회환경시스템공학과) ;
  • 최석원 (건국대학교 사회환경시스템공학과) ;
  • 박찬기 (건국대학교 사회환경시스템공학과) ;
  • 박해균 (삼성물산(주)건설부문 토목사업본부)
  • Published : 2006.08.31

Abstract

The purpose of this study is to evaluate the mechanical performance and fire resistance of wet-mixed high strength sprayed polymer-modified mortar in order to protect tunnel lining system which are in the event of fire disaster. Since the current commercial fire-resistant materials reproduce the low strength issue of mortar, this study aims to provide an enhanced fire-resistant mortar with a proper strength. Normally, a large temperature gradient phenomenon arise in the vicinity of free surfaces which are fully exposed in the event of persistent flame. Thereby, the determination of optimal cover depth of wet-mixed high strength sprayed polymer-mortar(WHSPM) is important for fire-resistance of tunnel lining system. With comparison of current commercial fire-resistance materials and WHSPM, the experimental result of WHSPM shows the better fire-resistant performance than the others. In addition, the cover limitation should be controlled by minimum 4cm depth in order to avoid fire-induced damage.

본 연구의 목적은 화재에 의하여 붕괴 위험성이 있는 터널콘크리트 구조물을 보호하기 위해서 사용하는 습식 고강도 폴리머 스프레이 모르타르의 역학적 특성과 화재저항성을 평가하는 것이다. 본 연구의 주요 목적은 낮은 강도를 가지고 있어 내화재료로서 충분하지 않은 현재 사용되고 있는 재료의 단점을 극복하기 위하여 강도와 화재저항성을 동시에 증가시키는 것이다. 또한 습식 고강도 폴리머 스프레이 모르타르의 피복두께에 따른 내부온도분포를 평가하였으며 화재가 발생하였을 경우 터널콘크리트 구조물을 보호할 수 있는 습식 고강도 폴리머 스프레이 모르타르의 최적두께를 결정하였다. 본 연구의 결과 습식 고강도 폴리머 스프레이 모르타르는 현재 상용화되어 있는 내화용 재료와 비교하여 강도가 높았으며, 우수한 내화성능을 확보하였다. 무엇보다도 화재로부터 기존 구조물을 보호하기 위한 고강도 폴리머 모르타르의 최적 피복두께는 4cm이상 이었다.

Keywords

References

  1. Haukur, I., and Anders, L., Recent Achievements Regarding Measuring of Time-Heat and Time-Temperature Development in Tunnel, Safe & Tunnels, First International Symposium, Prague, 2004, pp.87-96
  2. Kalifa, P., Menneteau, F. D., and Quenard, D., 'Spalling and pore pressure in HPC at high temperatures', Cement & Concrete Research, Vol.30, 2000, pp.1 - 13 https://doi.org/10.1016/S0008-8846(99)00207-0
  3. Pierre, K., Gregoire, C., and Christophe, G., 'Hightemperature behaviour of HPC with polypropylene fiber from spalling to microstructure', Cement & Concrete Research, Vol.31, 2001, pp.1487-1499 https://doi.org/10.1016/S0008-8846(01)00596-8
  4. Xin, L., Wei, S., and Sammy, Y. N. C., 'Effect of High Temperature and Cooling regimes on the Compressive Strength and Pore Properties of High Performance Concrete', Construction and Building Materials, Vol.14, 2000, pp.261-266 https://doi.org/10.1016/S0950-0618(00)00031-3
  5. Ahmed, G. N. and Hurst, J. P., 'An analytical approach for investigating the causes of spalling of high-strength concrete at elevated temperatures', Proceedings of the International Workshop on Fire Performance of High-Strength Concrete, NIST Special Publication 919, 1997, pp.95-108
  6. Felicetti, R., Gambarova, P. G, Corsi, F., and Giannuzzi, G, 'Residual Mechanical Properties of High-Strength Concrete Subjected to High-Temperature Cycles', Proceedings, 4th Internationl Symposium on Utilization of High-Strength/HighPerformance Concrete, France, 1996, pp.579-588
  7. Gabriel, A. K., 'Passive fire protection in tunnel,' Concrete for the Construction Industry, Vol.37, No.2., 2003, pp. 31 -36
  8. ITA Working group No.6 Maintenance and repair, Guidelines for structural fire resistance for road tunnels, ITA, 2004, pp.1-1-9-1
  9. Uomoto, T., 신간선 콘크리트터널의 박락과 콘크리트 구조물의 열화 보고서, 2002, pp.12-32
  10. Zongjin L., Xiangming, Z., and Bin, S., 'Fiber-Cement Extrudates with Perlite Subject to High Temperatures', Journal of Materials in Civil Engineering ASCE, Vol.16, No.3, 2004, pp.221-229
  11. Kodur, V. K. R., Bilodeau, A., and Hoff, G. C., Optimization of the type and amount of polypropylene fibres for preventing the spalling of lightweight concrete subjected to hydrocarbon fire, Cement & Concrete Composites, Vol.26, Issue2, 2004, pp.163-174 https://doi.org/10.1016/S0958-9465(03)00085-4