References
- Goto, Y. and Otsuka, K., 'Studies on Internal Cracks Forrned in Concrete Around Defonned Tension Bars', ACI Structural Journal, Vol.68, No.4, April 1971, pp.244-251
- Leonhardt, F., Crack Control in Concrete Structures, IABSE Surveys No.S-4177, Zurich, 1977
- Broms, B. B., 'Crack Width and Crack Spacing in Reinforced Concrete Members', ACI Structural Journal, Vol.62, No.9, October, 1965, pp.1237-1256
- Chan, H. C., Cheung, Y. K., and Huang, Y. P., 'Crack Analysis of Reinforced Concrete Tension Members', ASCE Journal of Structural Engineering, Vol.18, No.8, August 1992, pp.2118-2131
- Gergely, P. and Lutz, L.A., Maximum Crack Width in Reinforced Concrete Flexural Members, Causes, Mechanism, and Control of Cracking in Concrete ACI Special Publication SP-20, ACI, Michigan, 1968, pp.87-117
- ACI Committee 318, Building Code Requirement for Structural Concrete and Commentary, ACI, Detroit, 2002
- European Committee for Standardization, Eurocode 2-Design of Concrete Structures, CEN, Brussels, 2002
- CEB-FIP, CEB-PIP Model Code 1990, Comite Euro-International Du Beton, Paris, 1991
- 한국콘크리트학회, 건설교통부제정 콘크리트구조설계 기준 해설, 한국콘크리트학회, 2003
- Balazs, G., 'Cracking Analysis Based on Slip and Bond Stresses', ACI Material Journal, Vol.90, No.4, July- August 1993. pp.340- 348
- Shunsheng, Y. and Jiakui, C., 'Bond Slip and Crack Width Calculations of Tension Members', ACI Structural Journal, Vol.85, No.4, July-August 1988, pp.414-422
- Russo, G. and Romano, F., 'Cracking Response of RC Members Subjected to Uniaxial Tension', ASCE Journal of Structural Engineering, Vol.118, No.5, May 1992, pp.1172-1190 https://doi.org/10.1061/(ASCE)0733-9445(1992)118:5(1172)
- fib, Structural Concrete - Manual Textbook Volume 2, International Federation for Structural Concrete (fib), Switzerland, 1999
- Beeby, A. W., 'Predicting of Crack Width in Hardened Concrete', Structural Engineer, Vol.57A, No.1, January 1979, pp.9-17
- Lorrain, M., Maurel, O., and Seffo, M., 'Cracking Behavior of Reinforced High-Strength Concrete Tension Ties', ACI Structural Journal, Vol.95, No. 5, September-October 1998, pp.626-635
- Jaccoud, J.P., Charit, H., and Farra, B., 'Cracking Behavior of HSC Structures and Practical Consequences for Design', 3'rd International Symposium on Utilization of High-Strength Concrete, CEB-FIP, Lillehanmmer, 1992, pp.225-232
- Nawy, E. G., 'Crack Control in Reinforced Concrete Structures', ACI Structural Journal, Vol.65, No.10, October 1968, pp.825-836
- fib Task Group Bond Model, 'Bond of Reinforcement in Concrete', State-of-Art Report Bulletin 10, International Federation for Structural Concrete(fib), Switzerland, 2000
- Huang, Z., Engstrom, B., and Magnusson, J., 'Experimental Investigation of the Bond and Anchorage Behavior of Deformed Bar in High Strength Concrete', Fourth International Symposium on the Utilization of High Strength/ Performance Concrete, Paris, 1996, PP.1115-1124
- Jiang, D. H., Shah, S. P., and Andonian, A. T., 'Study of the Transfer of Tensile Forces by Bond', ACI Structural Journal, Vol.81, No.3, May-June 1984, pp.251 -259
- Scott, R. H. and Gill, P. A. T., 'Short-Term Distributions of Strain and Bond Stress along Tension Reinforcement', Structural Engineer, Vol. 65B, No.2, June 1987, pp.39-43
- Yannopoulos, P. J., 'Variation of Concrete Crack Width Through the Concrete Cover to Reinforcement', Magazine of Concrete Research, Vol.41, No.147, June 1989, pp.63-68 https://doi.org/10.1680/macr.1989.41.147.63
- Bilal, S. H. and Mohamad, H. H., 'Effect of Fiber Reinforcement on Bond Strength of Tension Lap Splices in High-Strength Concrete', ACI Structural Journal, Vol.98, No.5, September-October 2001, pp.638-647
- 강영진, 오병환, '철근콘크리트 휨부재의 균열폭 및 균열간격의 결정', 대한토목학회 논문집, 5권 4호, 1985, pp.103-111
- 고원준, 박선규, '부착특성을 고려한 철근콘크리트 부재의 휨 균열폭 산정', 대한토목학회 논문집, 22권 4-A호, 2002, pp.825-835
Cited by
- Flexural Bond Behavior of Rebar in Ultra-High Performance Concrete Beams Considering Lap-Splice Length and Cover Depth vol.08, pp.03, 2016, https://doi.org/10.4236/eng.2016.83013