초록
In this paper, object of experiment is to study on the effect parameters to obtain optimal surface roughness in face turning. Surface roughness is significantly important to be high quality of parts produced by turning process. For this purpose, the optimization of cutting parameters for face turning operation is investigated applying the Taguchi method. An orthogonal array, signal-to-noise, and the analysis of variance are employed to evaluate effect of cutting parameters for face turning. Also confirmation tests were performed to make a comparison between the results predicted from the mentioned correlations and the theoretical results. Cutting experiment is performed without cutting fluid using coated tungsten carbide insert about workpiece of SM45C. And regression analysis technique has been used to study the effects of the cutting parameters.