참고문헌
- Gardon, R. and Cobonpue, J., 1962, 'Heat Transfer Between a Flat Plate and Jets of Air Impinging on It,' International Development in Heat Transfer, ASME, pp. 454-460
- Gardon, R. and Akfirat, J.C., 1965,. 'The Role of Turbulence in Determining the Heat Transfer Characteristics of Impinging Jets,' International Journal of Heat and Mass Transfer, Vol. 8, pp. 1261-1272 https://doi.org/10.1016/0017-9310(65)90054-2
- Hrycak, P., Lee, D. T., Gauntner, J. W. and Livingood, J. N. B., 1970, 'Experimental Flow Characteristics of a Single Turbulent Jet Impinging on a Flat Plate,' NASA TN D-5690
- Martin, H., 1977, 'Heat and Mass Transfer Between Impinging Gas Jet and Solid Surfaces,' Advances in Heat Transfer, Vol. 13, pp. 1-60 https://doi.org/10.1016/S0065-2717(08)70221-1
- Goldstein, R.J. and Franchett, M.E., 1988, 'Heat Transfer from a Flat Surface to an Oblique Impinging Jet,' Journal of Heat Transfer, Vol. 110, pp. 84-90 https://doi.org/10.1115/1.3250477
- Lamont, P.L. and Hunt, B.L., 1980, 'The Impingement of Under expanded, Axi-symmetric Jets on Perpendicular and Inclined Flat Plates,' Journal of Fluid Mechanics, Vol. 100, Part 3, pp. 471-511 https://doi.org/10.1017/S0022112080001255
- Rubel, A., 1981, 'Computations of the Oblique Impingement of Round Jets upon a Plane Wall,' AIAA Journal, Vol. 19, pp. 863-871 https://doi.org/10.2514/3.7829
- Gau, C. and Chung, C.M., 1991, 'Surface Curvature Effect on Slot-Air Jet Impinging Cooling Flow and Heat Transfer Process,' ASME Journal of Heat Transfer, Vol. 113, pp. 858-864 https://doi.org/10.1115/1.2911214
- Yan, X., 1993, 'A Preheated-Wall Transient Method Using Liquid Crystals for the Measurement of Heat Transfer on External Surfaces and in Ducts,' Ph.D. Dissertation, University of California, Davis
- Lim, K.B., 1995, 'Measurement of the Heat Transfer Coefficent on a Concave Surface with a Turbulent Round Impinging Jet,' The Society of Airconditioning and Refrigerating Engineers of Korea Vol., No.1, pp. 112-119
- Yan, X., Baughn, J.W. and Mesbah, M., 1992, 'The Effect of Reynolds Number on the Heat Transfer Distribution from a Flat Plate to an Impinging Jet,' ASME HTD-Vol. 226, pp. 11-18
- Baughn, J.W. and Van, X., 1991, 'An Insertion Technique Using the Transient Method with Liquid Crystals for Heat Transfer Measurements in Ducts,' Fouling and Enhancement Interactions, Rabas, T.J. and Chenoweth, J.M., Edited, ASME HID-Vol. 164, pp. 77-83
- Vedula, R.P., Metzger, D.E. and Bickford, W.B., 1988, 'Effect of Lateral and Anisotropy Conduction on Determination of Local Convection Heat Transfer Characteristics with Transient Tests and Surface Coating,' ASME Collected Papers in Heat Transfer, HTD-Vol. 104, pp. 21-27
- Kline, S.J. and Mcklintock, F.A., 1953, 'Describing Uncertainties in Single Sample Experiments,' Mechanical 'Engineering, Vol. 75, No. 1, pp. 3-8
- Lim, K.B. and Lee, D.H., 1997, 'Concave Surface Curvature Effect on Heat Transfer from a Turbulent Round Impinging Jet,' Trans. of the KSME (B), Vol. 21. No. 5, pp. 691-699
- Yoon, S.H., Kim, M.K. and Lee, D.H., 1996, 'Turbulence Flow and Heat Transfer Characteristics of a Two-Dimensional Oblique Plate Impinging Jet,' KSME Int. J., Vol. 11, No. 4, pp. 476-483
- Lee, D.H., Chung, Y.S., Kim, D.S. and Lim, K.B., 1997, 'Heat Transfer and Flow Characteristics of a Circular Jet Impinging on a Convex Curved Surface,' Trans. of the KSME (B), Vol. 21, No. 4, pp. 579-588
피인용 문헌
- Effect of Inclined Jet on Heat/Mass Transfer for Impingement/Effusion Cooling System vol.32, pp.4, 2008, https://doi.org/10.3795/KSME-B.2008.32.4.283