한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제23권5호
  • /
  • Pages.162-169
  • /
  • 2006
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

신선 시 선재의 잔류응력 완화 방법에 관한 연구 및 나노 압입 시험을 이용한 잔류응력 평가

A Study on the Method of Residual Stress Relaxation during Wire Drawing and Evaluation of Residual Stress Using Nano Indentation Test

  • 고대철 (부산대학교 동남권부품소재산학협력혁신연구소) ;
  • 황원호 (부산대학교 대학원 정밀기계공학화) ;
  • 이상곤 (부산대학교 대학원 정밀기계공학화) ;
  • 김병민 (부산대학교 기계공학부)
  • 발행 : 2006.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Steel cord which is used as reinforcement in car tires is produced by wet-drawing process. Recently the quality improvement of the steel cord product is demanded by the tire market. After cold drawing process, produced residual stresses have a harmful effect on the durability of the wire and become the cause which decreases the quality of the product. Therefore, to improve the quality of the steel cord product, the research regarding the method of residual stress relaxation is necessary. To evaluate the quality of the cold drawn wire, it is very important to measure the residual stress, because the residual stress decides a variety of the quality level which is demanded in the cold drawn wire. The aim of this study is to propose residual stress relaxation method in the drawn wire using FE-analysis. The validity of the analysis results was verified by Nano indentation test.

키워드

참고문헌

  1. Kuboki, T., Akiyama, M., Neishi, Y. and Kuroda, K., 'Effect of final drawing with light reduction on the leveling of residual stress distribution in cold bar drawing,' Proc Instn Mech Engrs Part C, Vol. 214, pp. 1389-1400,2000 https://doi.org/10.1243/0954406001523362
  2. Kuboki, T., Akiyama, M., Neishi, Y. and Kuroda, K., 'Effect of die geometry on residual stress level present after bar drawing,' Ironmaking and Steelmaking, Vol. 28, No. 1, pp. 65-71, 2001 https://doi.org/10.1179/030192301677876
  3. Atienza, J. M., Martinez-Perez, M. L., Ruiz-Hervias, J., Mompean, F., Garcia-Hernandez, M. and Elices, M., 'Residual stresses in cold drawn ferritic rods,' Scripta Materialia, Vol. 52, pp. 305-309, 2005 https://doi.org/10.1016/j.scriptamat.2004.10.010
  4. Kuboki, T., Kawakami, I., Neishi, Y., Kuroda, K. and Akiyama, M., 'A study on the influence of mechanical properties on the distribution of axial residual stress after cold drawing of metallic bars,' Materials Science Research International, Vol. 7, No. 1 pp. 41-46, 2001
  5. Lee, Y. H., Jang, J. I. and Kwon, D. I., 'Evaluation of thin film residual stress through the theoretical analysis of nanoindentation curve,' KSME Part-A, Vol. 26, No.7, pp. 1270-1279,2002
  6. Akiyama, M. and Kuboki, T., 'Optimisation of method for reducing residual stresses after cold bar drawing,' Ironmaking and Steelmaking, Vol. 29, No. 2,pp.101-106,2002 https://doi.org/10.1179/030192302225001974
  7. Martinez-Perez, M. L., Mompean, F. J., Ruiz-Hervias, J., Borlado, C. R., Atienza, J. M., Garcia-Hernandez, M., Elices, Mo, Gil-Sevillano, J., Peng, R, L. and Buslaps, T., 'Residual stress profiling in the ferrite and cementite phases of cold-drawn steel rods by synchrotron X-ray and neutron diffraction,' Acta Materialia, Vol. 52, pp. 5303-5313, 2004 https://doi.org/10.1016/j.actamat.2004.07.036
  8. Ji, W. J., Lee, Y. H., Kim, W. So, Kim, C. M. and Kwon, D. G., 'Evaluation of residual stress on welded joint in API X65 pipe line through nondestructive instrumented indentation technique,' Journal of KWS, Vol. 21, No.5, pp. 547-554,2003