대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제30권5호
  • /
  • Pages.496-504
  • /
  • 2006
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

머신비전을 이용한 밸브어셈블리의 3차원 마멸특성 분석

3D Wear Analysis of Valve Assemblies by Using the Machine Vision

  • 박창우 (한양대학교 대학원 기계설계학과) ;
  • 정성종 (한양대학교 기계공학부)
  • 발행 : 2006.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Wear of engine valves and seat inserts is a major factor affecting engine performance. In order to improve quality and life of valve assemblies, wear mechanism and 3-D surface topography should be analyzed according to operating conditions of the engine. After developing an engine simulator that generates valve speed up to 90Hz and temperature up to $900^{\circ}C$ as well as controls test load, wear experiments have been conducted for two different engine speeds as 10Hz and 25Hz. In order to observe the wear characteristics and monitor surface conditions of the valve assemblies, a cost-effective 3-D wear analysis system based on the shape from focus(SFF) and machine vision has been fabricated in this paper. 3-D surface topography of the valve assemblies has been analyzed to understand the wear behavior according to operating conditions of the engine. Consequently, wear volume of the valve assemblies is quantized by using the developed 3-D wear analysis system.

키워드

참고문헌

  1. Wang, Y. S., Narasimhan, S., Larson, J. M., Larson, J. E. and Barber, G. C., 1996, 'The Effect of Operating Conditions on Heavy Duty Engine Valve Seat Wear,' Wear, Vol. 201, pp.15-25 https://doi.org/10.1016/S0043-1648(96)06945-1
  2. Ootani, T., Yahata, N., Fujiki, A., and Ehira, A., 1995, 'Impact Wear Characteristics of Engine Valve and Valve Seat Insert Materials at High Temperature (Impact Wear Tests of Austenitic Heat-Resistant Steel SUH36 Against Fe-Base Sintered Alloy Using Plane Specimens),' Wear, Vol. 188, pp.175-184 https://doi.org/10.1016/0043-1648(95)06656-X
  3. Bhushan, B., 1999, Handbook of Micro/nanotribology, Second Edition, CRC Press
  4. Nayar, S. K. and Nakagawa, Y., 1994, 'Shape from Focus,' IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. 16, No. 8, pp. 824-831 https://doi.org/10.1109/34.308479
  5. Yoon, H. S. and Chung, S. C., 2004, 'Vision Inspection of Micro-drilling Processes on the Machine Tool,' Transactions of the NAMRI/SME, Vol. 32, pp.391-398
  6. Yoon, H.S. and Chung, S.C., 2004, 'Machine Vision Inspection System of Micro-Drilling Processes on the Machine Tool,' Transactions of the KSME (A), Vol. 28, No. 6, pp.867-875 https://doi.org/10.3795/KSME-A.2004.28.6.867
  7. Dong, W. P., Sullivan, P. J. and Stout, K. J., 1994, 'Comprehensive Study of Parameters for Characterizing Three Dimensional Surface Topography III: Parameters for Characterizing Amplitude and Some Functional Properties,' Wear, Vol. 178, pp. 29-43 https://doi.org/10.1016/0043-1648(94)90127-9
  8. Dong, W. P., Sullivan, P. J. and Stout, K. J., 1994, 'Comprehensive Study of Parameters for Characterizing Three Dimensional Surface Topography IV: Parameters for Characterizing Spatial and Hybrid Properties,' wear, Vol. 178, pp. 45-60 https://doi.org/10.1016/0043-1648(94)90128-7
  9. Park, C. W., Chun, K. J. and Chung, S. C., 2004, 'Wear Measurement of Valve Assemblies by using the Machine Vision,' 2004 Annual Meeting, American Society for Precision Engineering, Vol. 34, pp. 289-292
  10. Chung, S.C. and Kim, M.S., 2005, 'Integrated Design of Servomechanisms Using a Disturbance Observer,' Transactions of the KSME (A), Vol. 29, No. 4, pp.591-599 https://doi.org/10.3795/KSME-A.2005.29.4.591
  11. Chung, S.C. et al, 2001, Modern Manufacturing Processes, Moonwundang, Seoul
  12. Bhushan, B., 2002, Introduction to Tribology, John Wiley&Sons, New York
  13. Fricke, R. W. and Allen C., 1993, 'Repetitive Impact Wear of Steels,' Wear, Vol. 162-164, pp. 837-847 https://doi.org/10.1016/0043-1648(93)90085-Z