DOI QR코드

DOI QR Code

Numerical Analysis of the Flow Characteristics in the Nano Fountain-Pen Using Membrane Pumping

박막펌핑을 이용한 Nano Fountain-Pen의 유동 특성에 관한 수치적 연구

  • 이진형 (성균관대학교 대학원) ;
  • 이영관 (성균관대학교 대학원) ;
  • 이석한 (성균관대학교 정보토신공학부) ;
  • 김훈모 (성균관대학교 기계공학부) ;
  • 김윤제 (성균관대학교 기계공학부)
  • Published : 2006.04.01

Abstract

Nano fountain-pen is a novel device to make the constant patterning in micro process using new designed probe. Fountain-pen nanolithography (FPN) is applied for constant supply of liquid in conjunction of patterns and surface variation in the micro process. In this study, nuo fountain-pen is composed with reservoir, micro channels, tip and scondary chamber. Instead of traditional method only using capillary force, liquid can be definitely and exactly injected with membrane pumping by the repulse force of tip. It is dfficult to perform experiments in the micro range so that we carried out a numerical analysis for internal flow, using a commercial code, FlUENT, The velocity, pressure and flow rate are obtained under laminar, unsteady, three-dimensional incompressible flow with no-slip condition, and results are graphically described.

Keywords

References

  1. K.-H. Kim, C. Ke, N. Moldvan and H. D. Espinosa, 2003, 'Massively Parallel Multitip Nanoscale Writer with Fluidic Capabilities-Fountain Pen Nanolithography (FPN)', Proceedings of the 4th International Symposium on MEMS and Nanotechnology, pp. 235-238
  2. S. Deladi, J. W. Berenschot, N. R. Tas, G. J. M. Krijnen, J. H. de Boer, M. J. de Boer and M. C. Elwenspoek, 2005, 'Fabrication of Micromachined Fountainpen with in Situ. Characterization Possibility of Nanoscale Surface Modification', J. Micromech. Microeng., Vol. 15, pp. 528-534 https://doi.org/10.1088/0960-1317/15/3/013
  3. D. Bullen, X. Wang, J. Zou, S. W. Chung, C. A. Mirkin, and C. Liu, 2004, 'Design, Fabrication, and Characterization of Thermally Actuated Probe Arrays for Dip Pen Nanolithography' , J. Microelectromech. System, Vol. 13, pp. 594-602 https://doi.org/10.1109/JMEMS.2004.828738
  4. F. M. White, 2003, 'Fluid Mechanics', McGraw-Hill, fifth edition, pp. 138-147
  5. A. Olssion, G. Stemme and E. Stemme, 1998, 'A Numerical Design Study of the Valveless Diffuser Pump Using a Lumped-mass Model', J. Micromech. Microeng., Vol. 9, pp. 34-44 https://doi.org/10.1088/0960-1317/9/1/004
  6. M. Richer, R. Linnemann and P. Woias, 1998, 'Robust design of gas and liquid micropumps' , J. Sensors and Actuators A 68, pp. 480-486 https://doi.org/10.1016/S0924-4247(98)00053-3
  7. L.-J. Yang, T.-J. Yao and Y.-C. Tai, 2004, 'The Marching Velocity of the Capillary Meniscus in a Microchannel' , J. Micromech. Microeng., Vol. 14, pp. 220-225 https://doi.org/10.1088/0960-1317/14/2/008