DOI QR코드

DOI QR Code

Testing of rubber bearings for the dynamic damper of seismic isolated buildings

  • 투고 : 2006.01.04
  • 심사 : 2006.05.03
  • 발행 : 2006.10.25

초록

The paper describes the testing facilities and the methodology on testing of laminated rubber bearings envisaged for application in the system of Dynamic Damper (DD) of seismic isolated buildings, as well as the obtained results. For the first time in Armenia laminated rubber bearings were tested simultaneously under the action of horizontal shear force and vertical tension force. The test results have proven the possibility of using rubber bearings as elements subjected to tension due to action of the mass of DD. Also it was confirmed that the suggested structural concept of DD for reducing the displacements and shear forces of seismic isolation systems will have reliable behavior during the design level earthquakes.

키워드

참고문헌

  1. Kaneko, M., Tamura, K., Maebayashi, K. and Saruta, M. (1990), 'Earthquake response characteristics of baseisolated buildings', Proceedings of the 4th US National Conference on Earthquake Engineering, May
  2. Melkumyan, M. G. (2000), 'The state-of-the-art in structural control in Armenia and proposal on application of the dynamic dampers for seismically isolated buildings', Proceedings of the Third International Workshop on Structural Control for Civil and Infrastructure Engineering, Paris, July
  3. Melkumyan, M. G. (2001), 'The state-of-the-art in development of testing facilities and execution of tests on isolation and bridge bearings in Armenia', Proceedings of the Fifth World Congress on Joints, Bearings and Seismic Systems for Concrete Structures, Rome, October
  4. Melkumyan, M. G. and Hakobyan, A. S. (2003), 'Testing of seismic isolation rubber bearings for retrofitting of the existing school #4 building in the city of Vanadzor, Armenia', Proceedings of the 8th World Seminar on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures, Yerevan, October
  5. Melkumyan, M. G. and Hakobyan, A. S. (2005), 'Testing of seismic isolation rubber bearings for different structures in armenia', Proceedings of the 9th World Seminar on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures, Kobe, June
  6. Naeim, F. and Kelly, J. M. (1999), Design of Seismic Isolated Structures: From Theory to Practice, John Wiley & Sons, Inc., New York / Chichester / Weinheim / Brisbane / Singapore / Toronto
  7. Parducci, A. and Medeot, R. (1987), 'Special dissipating devices for reducing the seismic response of structures', Pacific Conference on Earthquake Engineering, New Zealand, August
  8. Robinson, W. H. and Greenbank, L. R. (1976), 'An extrusion energy absorber suitable for the protection of structures during an earthquake', Earthq. Eng. Struct. Dyn., 4(3), 251-259 https://doi.org/10.1002/eqe.4290040306
  9. Skinner, R. I., Robinson, W. H. and McVerry, G. H. (1993), An Introduction to Seismic Isolation, John Wiley & Sons, Inc., New York / Chichester / Weinheim / Brisbane / Singapore / Toronto
  10. Takayama, M., Wada, A., Akiyama, H. and Tada, H. (1988), 'Feasibility study on base-isolated building', Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo-Kyoto