DOI QR코드

DOI QR Code

Design approach for a FRP structural formwork based steel-free modular bridge system

  • Cheng, Lijuan (Department of Civil and Environmental Engineering, University of California) ;
  • Karbhari, Vistasp M. (Department of Structural Engineering, University of California)
  • 투고 : 2005.08.08
  • 심사 : 2006.06.29
  • 발행 : 2006.11.30

초록

The paper presents results of parametric studies, and an overall approach for the design of a modular bridge system which incorporates a steel-reinforcement free concrete slab cast on top of carbon FRP stiffened deck panels which act as both structural formwork and flexural reinforcement, spanning between hollow box type FRP girders. Results of the parametric studies are highlighted to elucidate important relationships between critical configurational parameters and empirical equations based on numerical studies are presented. Results are discussed at the level of the individual deck and girder components, and as a slab-on-girder bridge system. An overall design methodology for the components and bridge system including critical performance checks is also presented.

키워드

참고문헌

  1. AASHTO LRFD Bridge Design Specifications (2004), 3rd Edition, American Association of State Highway and Transportation Officials, Washington, D.C
  2. ABAQUS/Standard User's Manual (2003), Version 6.4, ABAQUS Inc
  3. ACI 318-95 (1995), Building Code Requirements for Reinforced Concrete (ACI 318-95) and Commentary (ACI 318R-95), American Concrete Institute, Detroit
  4. Cheng, L., Zhao, L., Karbhari, Y.M., Hegemier, GA. and Seible, F. (2005), 'Assessment of a steel-free fiber reinforced polymer-composite modular bridge system', J Struct. Eng., ASCE, 131(3), 498-506 https://doi.org/10.1061/(ASCE)0733-9445(2005)131:3(498)
  5. Cheng, L. and Karbhari, Y.M. (2006), 'Fatigue behavior of a steel-free FRP-concrete modular bridge deck system', ASCE J Bridge Eng., 11(4),474-488 https://doi.org/10.1061/(ASCE)1084-0702(2006)11:4(474)
  6. Cheng, L. (2005), 'Development of a steel-free FRP-concrete slab-on-girder modular bridge system', Dissertation submitted to the Department of Structural Engineering in partial fulfillment of the Requirements for the Degree of Doctor of Philosophy, University of California, San Diego, La Jolla, CA 92093
  7. Dieter, D.A., Dietsche, J.S., Bank, L.C., Oliva, M.G and Russell, J.S. (2002), 'Concrete bridge decks constructed with fiber-reinforced stay-in-place forms and grid reinforcing', Transportation Research Record, 1814, 219-226 https://doi.org/10.3141/1814-26
  8. Deskovic, N., Triantafillou, T.C. and Meier, U. (1995), 'Innovative design of FRP combined with concrete: Short-term behavior', J Struct. Eng., ASCE, 121(7), 1069-1078 https://doi.org/10.1061/(ASCE)0733-9445(1995)121:7(1069)
  9. GangaRao, H.Y.S., Thippeswamy, H.K., Shekar, V. and Craigo, C. (1999), 'Development of glass fiber reinforced polymer composite bridge deck', SAMPE J, 35(4), 12-24
  10. Head, P.R. (1992), 'Design methods and bridge forms for the cost effective use of advanced composites in bridges', Proc. of the 1st Int. Conf. on Advanced Composite Materials in Bridges and Structures, Canadian Society for Civil Engineering, Montreal, Canada, 15-30
  11. Holmes, M. and Just, DJ. (1983), GRP in Structural Engineering, Science Publishers Ltd., London, England
  12. Karbhari, V.M., Seible, E, Burgueno, R., Davol, A., Wernli, M. and Zhao, L. (2000), 'Structural characterization of fiber-reinforced composite short-and medium-span bridge systems', Appl. Compo Mater., 7(2/3),151-182 https://doi.org/10.1023/A:1008974804077
  13. Kwon, S.C., Dutta, P.K., Kim, Y.H., Eum, S.H., Shin, D.H. and Lopez-Anido, R. (2004), 'Fatigue studies of FRP composite decks at extreme environmental conditions', Key Engineering Materials, Advances in Fracture and Failure Prevention, 261-263(2), 1301-1306
  14. McCormac, J.C. and Nelson, J.K., Jr. (1999), Structural Analysis: A Classical and Matrix Approach, John Wiley & Sons, Inc., NY
  15. MacGregor, J.G (1997), Reiriforced Concrete: Mechanics and Design, 3rd edition, Prentice-Hall Inc., New Jersey
  16. Porter, M.L. and Ekberg, C.E., Jr. (1976), 'Design recommendations for steel deck floor slabs', J Struct. Div., ASCE, 102(11),2121-2136
  17. Schuster, R.M. (1972), 'Composite steel-deck-reinforced concrete systems failing in shear-bond', Preliminary Report, The Ninth Congress of the International Association for Bridge and Structural Engineering, Zurich, Switzerland, 185-191
  18. Taly, N. (1998), Design of Modern Highway Bridges, McGraw Hill, Inc
  19. Timoshenko, S.P. and Goodier J.N. (1960), Theory of Elasticity, Chapter 10, International Student Edition, McGraw-Hill
  20. Yoshizawa, H., Wu, Z.S., Yuan, H. and Kanakubo, T. (2000), 'Study on FRP-concrete interface bond performance', J Materials, Concrete Structures and Pavements, JSCE, 49(662), 105-119
  21. Zsutty, T.C. (1968), 'Beam shear strength prediction by analysis of existing data', Proc., J the American Concrete Institute, November, 65(11), 943-951

피인용 문헌

  1. FRP Stay-in-Place Structural Forms for Concrete Bridge Decks: A State-of-the-Art Review vol.111, pp.5, 2014, https://doi.org/10.14359/51686810
  2. The effects of splices and bond on performance of bridge deck with FRP stay-in-place forms at various boundary conditions vol.56, 2013, https://doi.org/10.1016/j.engstruct.2013.05.031
  3. Structural Characteristics of FRP-Concrete Bridge Deck System vol.178-181, pp.1662-7482, 2012, https://doi.org/10.4028/www.scientific.net/AMM.178-181.2369
  4. Experimental study of vibration characteristics of FRP cables based on Long-Gauge strain vol.63, pp.6, 2006, https://doi.org/10.12989/sem.2017.63.6.735