DOI QR코드

DOI QR Code

Behaviors of box-shape steel reinforced concrete composite beam

  • Yang, Chun (Department of Civil Engineering, South China University of Tech.) ;
  • Cai, Jian (Department of Civil Engineering, South China University of Tech.) ;
  • Wu, Yi (Department of Civil Engineering, Guangzhou University) ;
  • He, Jiangang (Guangzhou Civil Architecture Research & Design Institute) ;
  • Chen, Haifeng (Guangzhou Civil Architecture Research & Design Institute)
  • 투고 : 2005.02.14
  • 심사 : 2005.11.08
  • 발행 : 2006.03.10

초록

Experimental studies on the behaviors of box-shape steel reinforced concrete (SRC) composite beams were conducted. Seven 1:3 scale model composite beams were tested to failure. Each of the beams was simply supported at the ends and two concentrated loads were applied at the one-third span and two-thirds span respectively. Experimental results indicate that the flexural strength can be enhanced when the ratio of flexural reinforcements and flange thickness of the shape steel are increased; the shear strength is enhanced with increase of web thickness of the shape steel. Insignificant effects of concrete in the box-shape steel are found on improving the flexural strength and shear strength of the box-shape SRC composite beams, thus concrete inside the box-shape steel can be saved, and the weight of the SRC beams can be decreased. Shear studs can strengthen the connection and co-work effects between the shape steel and the concrete and enhance the shear strength, but stud design for the composite beams should be further improved. Formulas for flexural and shear strength of the composite beams are proposed, and the calculated results are in good agreement with the experimental results. In general, the box-shape SRC composite beam is a kind of ductile member, and suitable for extensive engineering application.

키워드

참고문헌

  1. American Concrete Institute (ACI). Building Code Requirements for Reinforced Concrete. ACI 318, 1989
  2. American Institute of Steel Construction (AISC). Manual of Steel Construction, Load and Resistance Factor Design (LRFD), 2nd ed. Chicago: American Institute of Steel Construction; 1994. ASCE, 1992, 1421-154
  3. British Standards Institution. Steel, Concrete and Composite Bridges: Part 5: Code of Practice for Design of Composite Bridges (BS 5400). London: British Standards Institution, 1979
  4. Cai, J., Zheng, Y. and Yang, C. (2002), 'Experimental study on steel reinforced concrete beams', J. South China Univ. of Tech., 30(7), 52-56
  5. Caughey, R.A. and Scott, W.B. (1929), 'A practical method for the design of I beams haunched in concrete', Struct. Eng., 7(2), 75-93
  6. Chapman, J.C. and Balakrishnan, S. (1964), 'Experiments on composite beams', Struct Eng., 42(3), 69-83
  7. China Association for Engineering Construction Standardization. Specification for the Design of Steel Reinforced Concrete Structures (YB9082-97). Beijing, 1998
  8. China Association for Engineering Construction Standardization. Technical Specification for the Design of Steel Reinforced Concrete Composite Structures (JGJ138-2001). Beijing, 2002
  9. Dai, G.-L., Jiang, Y.-S. etc. (2003), 'Experimental study on aseismic behaviors of transfer story with steel reinforced concrete in low stories with large space', China Civil Eng. J., 36(4), 24-32
  10. ECCS. Composite Structure. London and New York, The Construction Press, 1981
  11. Elnashai, A.S., Takanashi, K., Elghaouli, A.Y. and Dowling, P.J. (1991), 'Experimental behaviour of partially encased composite beam-columns under cyclic and dynamic loads', Proc. Institution Civil Eng. Part 2, 91, 259-272
  12. European Committee for Standardization. Design of Composite Steel and Concrete Structures, Part 1.1: General Rules and Rules for Buildings (Eurocode 4). Brussels: European Committee for Standardization, 1992
  13. Kindmann, R. and Bergmann, R. (1993), 'Effect of reinforced concrete between the flanges of steel profile of partially encased composite beams', J. Construct. Steel Res., 27, 107-122 https://doi.org/10.1016/0143-974X(93)90009-H
  14. Mergulhao, A.J.R., Freitas, A.M.S. and Machado, R.M. (1998), 'Composite steel beams strength evaluation constituted of steel profiles filled with reinforced concrete', J. Construct. Steel Res., 46, 223-224 https://doi.org/10.1016/S0143-974X(98)00097-2
  15. Nakamura, S.-I. and Narita, N. (2003), 'Bending and shear strengths of partially encased composite I-girders', J. Construct. Steel Res., 59, 1435-1453 https://doi.org/10.1016/S0143-974X(03)00104-4
  16. Purkiss, J.A. (1996), Fire Safety Engineering, Butterworth Heinemann
  17. Subedi, N.K. (1989), 'Reinforced concrete beams with plate reinforcement for shear', Proc. of ICE, Part 2, September 377-399
  18. Subedi, N.K. (1990), 'Ultimate strength analysis of reinforced concrete coupling beams', The Struct. Eng., 68(3), 45-49
  19. Subedi, N.K. and Baglin, P.S. (1999), 'Plate reinforced concrete beams: Experimental work', Eng. Struct., 21, 232-254 https://doi.org/10.1016/S0141-0296(97)00171-5
  20. Subedi, N.K. and Baglin, P.S. (2001), 'Ultimate load analysis of plate reinforced concrete beams', Eng. Struct., 23, 1068-1079 https://doi.org/10.1016/S0141-0296(01)00013-X
  21. Yam, L.C.P. and Chapman, J.C. (1968), 'The inelastic behaviour of simply supported beam of steel and concrete', J. Instil. Civ. Eng., 41(6), 51-83
  22. Ye, L.P., Zhao, S.H. and Fang, E.H. (1999), 'Calculation of flexural strength for SRC element', Eng. Mech., 16(2), 29-36
  23. Ye, L.P. and Fang, E.H. (2000), 'State-of-the-art of study on the behaviors of steel reinforced concrete structure', China Civil Eng. J., 33(5), 1-12

피인용 문헌

  1. Mechanical behaviours and engineering application of steel truss reinforced concrete transfer beam in tall buildings vol.20, pp.6, 2011, https://doi.org/10.1002/tal.589
  2. Experimental study on flexural strength of modular composite profile beams vol.7, pp.1, 2006, https://doi.org/10.12989/scs.2007.7.1.071
  3. Experimental evaluation on the seismic performance of high strength thin-walled composite members accounting for sectional aspect ratio effect vol.9, pp.4, 2006, https://doi.org/10.12989/scs.2009.9.4.367