해수흡수된 두께가 두꺼운 카본/에폭시 복합재의 정수압 증가에 따른 파괴인성에 대한 실험적 연구

An Experimental Study on the Fracture Toughness of Seawater-absorbed Thick Carbon/epoxy Composite in the Hydrostatic Pressure Environment

  • 하성록 (경희대학교 기계공학과) ;
  • 이경엽 (경희대학교 테크노공학대학)
  • Ha Sung-Rok (Graduate School of Mechanical Engineering, Kyunghee University) ;
  • Rhee Kyong-Yop (Center far media transport system, School of mechanical and industrial system engineering, Kyunghee University)
  • 발행 : 2006.03.01

초록

해저환경에서 PMC(고분자기지 복합재)는 금속재 구조물에 비해 부식성이 우수한 것으로 알려져 있다. 해저환경에서 고분자기지 복합재의 파괴특성에 대한 이해는 증가하는 해저구조물 제조에 반드시 필요하다. 본 연구에서, 파괴시험은 해수흡수 된 카본/에폭시 복합재에 대해 정수압을 네단계(0.1 MPa, 100 MPa, 200 MPa and 270 MPa)로 증가시켜 수행하였다. 파괴인성은 정수압에서의 일인자방법을 적용하였다. 파괴거동은 모든 정수압에서 선형적이었고 파괴인성은 정수압이 증가할수록 증가하였다.

It is well-known that the corrosive behavior of PMC (polymer matrix composite) structure is much better than the metal structure in the marine environment. The understanding of fracture behavior of PMC in the deep-sea environment is essential to expand its use in the marine industry. For a present study, fracture tests have been performed under low different pressure levels such as 0.1 MPa, 100 MPa, 200 MPa, and 270 MPa using the seawater-absorbed carbon/epoxy composite samples. Fracture toughness was determined from the work factor approach as a function of hydrostatic pressure. It was found that fracture behavior was a linear elastic far all pressure levels. The fracture toughness increased with increasing pressure.

키워드

참고문헌

  1. Chou, I. (1998). Effect of fiber orientation and moisture absorption on the interlaminar fracture toughness of CFRP laminates. Compo. Mater., 7, 377-394 https://doi.org/10.1163/156855198X00264
  2. Grant, T.S. and Bradley, W.L. (1995). In-situ observation in SEM of degradation of graphite/epoxy composite materials due to seawater immersion. J. Compos. Mater., 29, 852-867 https://doi.org/10.1177/002199839502900701
  3. Karasek, M.L., Srait, L.H. and Amateau, M F. (1992). Effects of seawater immersion on the impact resistance of glass fiber reinforced epoxy composites. J. Compos. Technol. Research, 26, 2118-2133
  4. Ogi, K. and Takeda, N. (1997). Effects of moisture content on nonlinear deformation behavior of CF/epoxy composites. Compos. Mater., 31, 530-551 https://doi.org/10.1177/002199839703100601
  5. Parry, T.V. and Wronski, A.S. (1981). The effect of hydrostatic pressure on the tensile properties of pultruded CFRP. J. of Materials Science, 20, 2141-2147 https://doi.org/10.1007/BF01112298
  6. Rhee, K.Y. (2000). Hydrostatic pressure effect on the fracture toughness of unidirectional (0-deg) graphite/epoxy laminated composites. J. of Composite Materials, 34, 599-613 https://doi.org/10.1106/L8K5-JVC4-90X0-XL97
  7. Rhee, K.Y. and Koh, S.K. (1999). A study on the compressive behavior of multi-directional graphite/epoxy composites under hydrostatic pressure. Korean Society of Mechanical Enginieering, 23, 1373-1379
  8. Rhee, K.Y., Lee, S.M. and Park, S.J. (2004). Effect of hydrostatic pressure on the mechanical behavior of seawater-absorbed carbon/epoxy composite. Materials Science and Engineering, 384, 308-313 https://doi.org/10.1016/S0921-5093(04)00854-8
  9. Rhee, K.Y., Lee, J.H. and Park, S.J. (2003). Effect of hydrostatic pressure on the elastic work factor, ${\eta}_{el}$ and fracture toughness determination of unidirectional composites using ${\eta}_{el}$ Materials Science and Engineering, 349, 218-223 https://doi.org/10.1016/S0921-5093(02)00810-9
  10. Rice, J.R., Paris, P.C. and Merkle, J.G. (1973). Some further results of J-integral analysis and estimates. ASTM STP 536, 231-235
  11. Shin, E.S. and Pae, K.D. (1992). Effects of hydrostatic pressure on the torsional shear behavior of graphite/epoxy composites. J. of Composite Materials, 26, 462-485 https://doi.org/10.1177/002199839202600401
  12. Sloan, F.E. and Seymour, R.J. (1992). The effect of seawater exposure on mode I interlaminar fracture and crack growth in graphite /epoxy. J. Compos. Mater., 26, 2655-2673 https://doi.org/10.1177/002199839202601802
  13. Tucker, W.C. and Brown, R. (1988). Moisture absorption of graphite/polymer composites under 2000 feet of seawater. J. Compos. Mater., 23, 787-797 https://doi.org/10.1007/BF00616805
  14. Wronski, A.S. and Parry, T.V. (1982). Compressive failure and kinking in the uniaxially allighned glass-resin composite under superimposed uydrostatic pressure. J. of Materials Science, 17, 3656-3662 https://doi.org/10.1007/BF00752211