DOI QR코드

DOI QR Code

A STUDY OF INSERTION DEPTH OF BUCHANAN PLUGGER AFTER SHAPING USING NI-TI ROTARY FILES IN SIMULATED RESIN ROOT CANALS

Simulated resin root canal에서 엔진 구동형 Ni-Ti 파일로 근관성형 후 Buchanan plugger의 근관 내 삽입깊이에 대한 비교 연구

  • Park, Youn-Sik (Dept. of conservative Dentistry, School of Dentistry, Dental Science Research Institute, Chonnam National University) ;
  • Kim, Dong-Jun (Dept. of conservative Dentistry, School of Dentistry, Dental Science Research Institute, Chonnam National University) ;
  • Hwang, Yun-Chan (Dept. of conservative Dentistry, School of Dentistry, Dental Science Research Institute, Chonnam National University) ;
  • Hwang, In-Nam (Dept. of conservative Dentistry, School of Dentistry, Dental Science Research Institute, Chonnam National University) ;
  • Oh, Won-Mann (Dept. of conservative Dentistry, School of Dentistry, Dental Science Research Institute, Chonnam National University)
  • 박연식 (전남대학교 치의학 전문대학원 보존학교실, 치의학연구소) ;
  • 김동준 (전남대학교 치의학 전문대학원 보존학교실, 치의학연구소) ;
  • 황윤찬 (전남대학교 치의학 전문대학원 보존학교실, 치의학연구소) ;
  • 황인남 (전남대학교 치의학 전문대학원 보존학교실, 치의학연구소) ;
  • 오원만 (전남대학교 치의학 전문대학원 보존학교실, 치의학연구소)
  • Published : 2006.03.01

Abstract

This study was conducted to evaluate the insertion depth of Buchanan plugger after shaping by various Ni-Ti rotary files. It was conducted to determine which size of plugger are appropriate, when root canals are shaped with Ni-Ti rotary files and obturated by Continuous wave of condensation technique. Two type of eighty simulated resin blocks were used : J-shaped and straight shaped canal. The simulated canals were instrumented by ProTaper and ProFile. Buchanan pluggers were inserted into the canal, and then the image was recorded to scanner. The distance from the apex of the canal to the plugger tip was measured by image analysis program. Data were analyzed by one-way ANOVA followed by Scheffe's test. The results were as follows 1. In straight canal finished up to ProTaper F2 and F3 file, F and FM pluggers were inserted more than 5 mm short of working length. 2. In J-shaped canal finished up to ProTaper F2 file, F pluggers were inserted more than 5 mm short of working length. Finished up to ProTaper F3 file. F and FM pluggers were inserted more than 5 mm short of working length. 3. In straight and J-shaped canal finished up to ProFile .06/#20 and .06/#25, any of Buchanan plugger could not be inserted more than 5 mm short of working length. These results suggest that canals shaped by ProTaper could be obturated by Continuous wave of condensation technique with F and FM size Buchanan plugger.

본 연구는 레진 블록에서 엔진구동형 Ni-Ti기구를 이용하여 근관성형 후 Buchanan plugger의 삽입 깊이에 대한 비교를 통해 임상적 상황에서 Ni-Ti 파일로 근관 성형 후 Continuous wave of condensation technique을 이용한 근관 충전시 적절한 크기의 Buchanan plugger 선택에 지침을 제공하기 위해 시행되었다. 만곡근관과 직선근관을 가진 레진 블록에서 ProTaper와 ProFile을 이용하여 근관 성형을 하였다. 성형 후 근관에 Buchanan plugger가 근관벽과 처음으로 접촉하는 부위까지 삽입한 후 그 상태에서 스캐너를 이용하여 이미지를 얻었다. 이미지 분석 프로그램을 이용해 근첨에서 plugger 첨부까지의 거리를 얻었다. 각 기구에 대한 plugger 삽입깊이에 대한 유의성을 검정하기 위해 one-way ANOVA를 시행하였고, 사후검정을 위해 Scheffe's test를 시행하였다. 본 연구의 결과 만곡되고 좁은 근관에서, ProTaper F2와 F3로 마무리 성형한 근관에서 F, FM크기의 plugger를 사용할 경우 Continuous wane of condensation technique으로 적절한 근관충전이 가능함을 시사하였다.

Keywords

References

  1. Seltzer S, Bender IB. The interrelationship of pulp and periodontal disease. Oral Surg 16:1474-1490, 1963 https://doi.org/10.1016/0030-4220(63)90385-2
  2. Langeland K. Rodriques H, Dowden W. Periodontal disease, bacteria, and pulpal histopathology. Oral Surg 37:257-270, 1974 https://doi.org/10.1016/0030-4220(74)90421-6
  3. Nichols E. Lateral radicular disease due to lateral branching of the root canal. Oral Surg 16: 839-845, 1963 https://doi.org/10.1016/0030-4220(63)90322-0
  4. Weine F. The enigma of the lateral canal. Dent Clin North Am 28:833-852, 1984
  5. Schilder H. Filling root canals in three dimensions. Dent Glin North Am 11:723-744, 1967
  6. Allison DA, Weber CR. Walton RE. The influence of . the method of canal preparaion on the quality of apical and coronal obturation. J Endod 5:298-304, 1979 https://doi.org/10.1016/S0099-2399(79)80078-3
  7. Lugassy AA, Yee F. Root canal obturation with guttapercha a scanning electron microscope comparison of vertical compaction and automated thermatic condensation. J Endod 8:120-125, 1982 https://doi.org/10.1016/S0099-2399(82)80247-1
  8. Buchanan LS. The Continuous wave of obturation technique: 'centered' condensation of warm gutta percha in 12 seconds. Dent Today 15:60-67, 1996
  9. Buchanan LS. The Continuous wave of condensation technique: a convergence of conceptual and procedural advances in obturation. Dent Today 13:80-85, 1994
  10. Buchanan LS. Continuous wave of condensation technique. Endod Prac 1:7-18, 1998
  11. Calberson FLG, Deroose CAJG, Hommez GMG, Raes H, De Moor RJG. Shaping ability of GTTM Rotary Files in simulated resin root canals. Int Endod J 35: 607-614, 2002 https://doi.org/10.1046/j.1365-2591.2002.00540.x
  12. Eldeeb ME, Boraas JC. The effect of different files on the preparation shape of severely curved canals. Int Endod J 18:1-7, 1985 https://doi.org/10.1111/j.1365-2591.1985.tb00414.x
  13. Kum KY, Spangberg L, Cha BY, Jung IY, Lee SJ, Lee CY. Shaping ability of three ProFile rotary instrumentation techniques in simulated resin root canals. J Endod 26: 719-723. 2000 https://doi.org/10.1097/00004770-200012000-00013
  14. Dummer PMH. Alodeh MHA. A method for the construction of simulated root canals in clear resin blocks. Int Endod J 24:63-66, 1991 https://doi.org/10.1111/j.1365-2591.1991.tb00809.x
  15. Thompson SA, Dummer PMH. Shaping ability of ProFile.04 taper series 29 rotary nickel-titanium instruments in simulated root canals. Part 1. Int Endod J 30:1-7, 1997 https://doi.org/10.1111/j.1365-2591.1997.tb01093.x
  16. Kazemi R, Stennman E, Spangberg LS. Machining effciency and wear resistance of nickel-titanium endodontic files. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 81: 596-602, 1996 https://doi.org/10.1016/S1079-2104(96)80055-2
  17. Budd CS, Weller RN, Kulild JC. A comparison of thermoplasticized injectable gutta-percha obturation techniques. J Endod 17:260-264, 1991 https://doi.org/10.1016/S0099-2399(06)81863-7
  18. Smith RS, Weller RN, Loushine RJ, Kimbrough WF. Effect of varying the depth of heat application on the adaptability of gutta-percha during warm vertical compaction. J Endod 26:668-672, 2000 https://doi.org/10.1097/00004770-200011000-00009
  19. Guess GM, Edwards KR, Yang ML, Iqbal MK. Kim S. Analysis of Continuous-wave obturation using a singlecone and hybrid technique. J Endod 29:509-512, 2003 https://doi.org/10.1097/00004770-200308000-00005
  20. Bowman CJ, Baumgartner JC. Gutta-percha obturation of lateral grooves and depressions. J Endod 28:220-223, 2002 https://doi.org/10.1097/00004770-200203000-00019
  21. Peter OA, Peter CI, Schonenberger K , Barbaknow F. ProTaper rotary root canal preparation: effects of canal anatomy on final shape analysed by micro CT. Int Endod J 36:86-92, 2003 https://doi.org/10.1046/j.1365-2591.2003.00626.x
  22. 이철환, 조경모, 홍찬의. 수종의 엔진구동형 Nickel-Titanium file을 이용한 근관형성 방법이 근관만곡도 유지능력에 미치는 영향. 대한치과보존학회지 28:41-49, 2003
  23. Yun HH, Kim SK. A comparison of the shaping abilities of 4 nickel-titanium rotary instruments in simulated root canals. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 95: 228-233, 2003 https://doi.org/10.1067/moe.2003.92
  24. Schneider SW. A comparison of canal prepararion in straight and curved canals. Oral Surg Oral Med Oral Patho 132:271-275, 1971