참고문헌
- Bakalis, S. and M.V. Karwe, 2002, Velocity distributions and volume flow rates in the nip and translational regions of a corotating, self-wiping, twin-screw extruder, Journal of Food Engineering 51, 273-282 https://doi.org/10.1016/S0260-8774(01)00068-1
- Bravo, V.L. and A.N. Hrymak, 2000, Numerical simulation of pressure and velocity profiles in kneading elements of a corotating twin screw extruder, Polymer Engineering and Science 40, 525-541 https://doi.org/10.1002/pen.11184
- Bravo, V.L., A.N. Hrymak and J.D. Wricht, 2004, Study of particel trajectories, residence times and flow behavior in kneading discs of intermeching Co-rotating twin-screw extruders, Polymer Engineering and Science 44, 779-793 https://doi.org/10.1002/pen.20070
- Cheng, H. and I.M. Zloczower, 1998, Distributive mixing in conveying elements of z ZSK-53 Co-rotating twin screw extruder, Polymer Engineering and Science 38, 926-935 https://doi.org/10.1002/pen.10260
- Ishikawa, T., S.I. Kihara and K. Funatsu, 2000, 3-D numerical simulations of nonisothermal flow in Co-rotating twin screw extruders, Polymer Engineering and Science 40, 357-364 https://doi.org/10.1002/pen.11169
- Ishikawa, T. and T. Amano, 2002, Flow pattern and mixing mechanisms in the screw mixing element of a Co-rotating twin-screw extruder, Ploymer Engineering and Science 42, 925-939 https://doi.org/10.1002/pen.11002
- Jaluria, Y., M.V. Karwe and V. Sernas, 1996, Transport in a twinscrew extruder for the processing of polymers, Polymer Engineering and Science 36, 1531-1540 https://doi.org/10.1002/pen.10548
- Kajiwara, T., Y. Nagashima, Y. Nakano and K. Funatsu, 1996, Numerical study of twin-screw extruder by three-dimesnional flow analysis-development of analysis technique and evaluation of mixing performance for full flight screws, Polymer Engineering and Science 36, 2142-2152 https://doi.org/10.1002/pen.10611
- Kim, N., H.B. Kim and J.W. Lee, 2006, Numerical analysis of internal flow and mixing performance in polymer extruder I: single screw extruder, to be published
- Linjie, Z., A.N. Kwabena and S.H. Kun, 2005, Investigation of mixing mechanisms and energy balance in reactive extrusion using three-dimensional numerical simulation method, International Journal of Heat and Mass Transfer 48, 3411-3422 https://doi.org/10.1016/j.ijheatmasstransfer.2004.12.049
- Shearer, G. and C. Tzoganakis, 2000, The effects of kneading block design and operating conditions of distributive mixing in twin screw extruders, Polymer Engineering and Science 40, 1095-1106 https://doi.org/10.1002/pen.11237
- Ye, Y.S., H.B. Kim, N. Kim and J.W. Lee, 2005, A study on analysis of polymer extruder process using finite element method, The Korean Society of Mechanical Engineers, Part A 29, 145- 155 https://doi.org/10.3795/KSME-A.2005.29.1.145
- Yoshinaga, M., S. Katsuki, M. Miyazaki, L. Liu, S.I. Kihara and K. Funatsu, 2000, Mixing mechanism of three-tip kneading block in twin screw extruders, Polymer Engineering and Science 40, 168-178 https://doi.org/10.1002/pen.11150