Numerical analysis of internal flow and mixing performance in polymer extruder I: single screw element

  • Kim, Nak-Soo (Dept. of Mechanical Engineering, Sogang University) ;
  • Kim, Hong-Bum (Dept. of Mechanical Engineering, Sogang University) ;
  • Lee, Jae-Wook (Dept. of Chemical and Biomolecular Engineering, Sogang University)
  • 발행 : 2006.09.30

초록

We analyzed the non-Newtonian and non-isothermal flow in a single screw extruder system and investigated the mixing performance with respect to the screw speed and the screw pitch. The viscosity of polymer melt was described with Carreau-Yasuda model. The mixing performance was computed numerically by tracking the motions of particles in the screw element system. The extent of mixing was characterized in terms of the deformation rate, the residence time distribution, and the strain. The results revealed that the high screw speed reduces the residence time but increases the deformation rate while the small screw pitch increases the residence time. It is concluded that the high screw speed increases the dispersive mixing performance and the small screw pitch increases the distributive mixing performance.

키워드

참고문헌

  1. Ahmad, K. and C. Jean-Robert, 2005, Numerical simulation of non-isothermal three-dimensional flows in an extruder by a finite volume method, J. non-Newtonian Fluid Mech. 126, 7 https://doi.org/10.1016/j.jnnfm.2004.12.002
  2. Fenner, R.T., 1977, Development in the analysis of steady screw extrusion of polymers, Polymer 18, 617 https://doi.org/10.1016/0032-3861(77)90066-0
  3. Ghoreishy, M. and M.R. Nouri, 1999, Finite element analysis of thermoplastic melts flow through the metering and die regions of single screw extruder, Inc. J. Appl. Polymer Sci. 74, 676 https://doi.org/10.1002/(SICI)1097-4628(19991017)74:3<676::AID-APP22>3.0.CO;2-#
  4. Griffith, R.M., 1962, Fully developed flow in screw extruder, Ind. Eng. Chem. Fundamentals 1, 180 https://doi.org/10.1021/i160003a004
  5. Karwe, M.V. and T. Jaluria, 1990, Numerical simulation of fluid flow and heat transfer in single screw extruder for non-Newtonian fluids, Numerical, Part A 17, 167 https://doi.org/10.1080/10407789008944738
  6. Kim, S.J. and T.H. Kwon, 1996a, Enhancement of mixing performance of single-screw extrusion processes via chaotic flows: Part 1, Basic concepts and experimental study, Advances in Ploymer Tech. 15, 41
  7. Kim, S.J. and T.H. Kwon, 1996b, Enhancement of mixing performance of single-screw extrusion processes via chaotic flows: Part 1, Basic concepts and experimental study, Advances in Ploymer Tech. 15, 41 https://doi.org/10.1002/(SICI)1098-2329(199621)15:1<41::AID-ADV4>3.0.CO;2-K
  8. Kwag, D.S., W.S. Kim, K.S. Lee and M.Y. Lyu, 2001, A three-dimensional numerical study of fluid flow and heat transfer in the single screw extruder, Proceeding of the second International Conference on Computational Heat and Mass Transfer, 22-26
  9. Raman, V., Y. Chiruvella, Y. Jaluria and V. Sernas, 1996, Extrusion of non-newtonian fluid in a single-screw extruder with pressure back flow, Polymer Eng. and Sci. 36, 358 https://doi.org/10.1002/pen.10422
  10. Sastrohartono, T., Y. Jaluria, M. Esseghir and V. Sernas, 1994, A numerical and experimental study of three-dimensional transport in the channel of an extruder for polymeric materials, Int. J. Heat Mass Transfer 38, 1957
  11. Syrjala, S., 1999, On the analysis of fluid flow and heat transfer in the melt conveying section of a single screw extruder, Numerical Heat Transfer, Part A 35, 25 https://doi.org/10.1080/104077899275353
  12. Syrjala, S., 2000, Numerical simulation of non-isothermal flow of polymer melt in a single screw extruder: A validation study, Numerical Heat Transfer, Part A 37, 897 https://doi.org/10.1080/10407780050045883
  13. Ye, Y.S., H.B. Kim, N. Kim and J.W. Lee, 2005, A study on analysis of polymer extruder process using the finite element method, The Korean Society of Mechanical Engineers Part A 29, 145 https://doi.org/10.3795/KSME-A.2005.29.1.145