참고문헌
- O'Dowd, N. P. and Shih, C. F., 1991, 'A Family of Crack Tip Fields Characterised by a Triaxiality Parameter,' Journal of Mechanics and Physics of Solids, Vol. 39, pp. 989-1015 https://doi.org/10.1016/0022-5096(91)90049-T
- Hancock, J. W., Reuter, W. G. and Parks, D. M., 1993, 'Constraint and Toughness Parameterised by T,' Constraint Effect in Fracture, ASTM STP 1171, Hackett E M, Schwalbe K-H, and Dodds R-H (editors), American Society for Testing and Materials, Philadelphia, pp. 21-40
- Joyce, J A., Hackett, E. M. and Roe, C, 1993, 'Effects of Crack Depth and Mode of Loading on the J-R Curve Behaviour of a High-Strength Steel,' Constraint Effect in Fracture, ASTM STP 1171, Hackett E M, Schwalbe K-H, and Dodds R-H (editors), American Society for Testing and Materials, Philadelphia, pp. 239-263
- Roos, E., Eisele, U. and Silcher, H., 1993, 'Effect of Stress State on the Ductile Fracture Behaviour of Large-Scale Specimens,' Constraint Effect in Fracture, ASTM STP 1171, Hackett E M, Schwalbe K-H, and Dodds R-H (editors), American Society for Testing and Materials, Philadelphia, pp. 41-63
- Kirk, M. T. and Dodds, R-H Jr., 1993, 'J and CTOD Estimation Equations for Shallow Cracks in Single Edge Notch Bend Specimens,' Journal of Testing and Evaluation, Vol. 21, pp. 228-238 https://doi.org/10.1520/JTE11948J
- Schwalbe, K-H., Neale, B K. and Heerens, J., 1994, 'The GKSS Testing Procedure for Determining the Fracture Behaviour of Materials: EFAM GTP 94,' GKSS Report GKSS/94/E/60. GKSS Froschungszentrum, Geesthacht, Germany
- Kim, Y. J. and Budden, P. J., 2001, 'Plastic Factors of Homogeneous and Bi-Material SE(T) Specimens for Toughness and Creep Crack Growth Testing,' Fatigue and Fracture of Engineering Materials and Structures, Vol. 24, pp. 751-760 https://doi.org/10.1046/j.1460-2695.2001.00436.x
- Kim, Y. J, 2002, 'Experimental J Estimation Equations for Single Edge Cracked Bars in Four-Point Bend: Homogeneous and Bi-Material Specimens,' Engineering Fracture Mechanics, Vol. 69, pp. 793-811 https://doi.org/10.1016/S0013-7944(01)00125-4
- Kim, Y. J., Sohn, B. G and Kim, Y. J, 2004,'Elastic-Plastic Finite Element Analysis for Double-Edge-Cracked Tension Plates,' Engineering Fracture Mechanics, Vol. 71, pp. 945-966 https://doi.org/10.1016/S0013-7944(03)00157-7
- Jin-Su Kim, Soo-Man Cho, Yun-Jae Kim and Young-Jin Kim, 2003, 'Specimen Thickness and Crack Depth Effects on J Testing and Crack Tip Constraint for Non-Standard Specimen,' Trans. Of the KSME, A, ?Vol. 27, No.9, pp. 1531-1538
- ASTM Standard, E 1739-96, Standard Test Method for J Integral Characterisation of Fracture Toughness, Annual Book of ASTM Standards, Section 3, Vol. 03.01, pp. 957-980
- McClintock, F.A., 1971, Plasticity aspects of fracture, In H. Liebowitz (ed.), Fracture Vol. 3. Academic Press, New York, 1971, pp. 47-225
- Green, A.P. and Hundy B.B., '1956, Initial Plastic Yielding in Notched Bend Tests,'Journal of the Mechanics and Physics of Solids, Vol. 4, pp. 128-144 https://doi.org/10.1016/0022-5096(56)90085-0
- Ewing, D.G.F., 1968, 'Calculations on the Bending of Rigid/Plastic Notched Bars,' Journal of the Mechanics and Physics of Solids, Vol. 16, pp. 205-213 https://doi.org/10.1016/0022-5096(68)90029-X
- Hill, R., 1956, The Mathematical Theory of ?Plasticity, Oxford University Press, Oxford
- Kachanov, L. M., 1971, Foundation of the Theory of Plasticity, North-Holland, Amsterdam
- ABAQUS User's Manual. version 6.3, Hibbit, Karlsson and Sorensen, Inc., Providence, RI, 2003
- Lee, H. and Parks, D.M., 1993, 'Fully Plastic Analyses of Plane Strain Single Edge Cracked Specimens Subject to Combined Tension and Bending,' International Journal of Fracture, Vol. 63, pp.329-349 https://doi.org/10.1007/BF00013042
- Ainsworth, R. A., Sattari-Far, I., Sherry, A. H., Hooton, D G. and Hadley, I., 2000, 'Methods for Including Constraint Effects Within the SINTAP Procedures,' Engineering Fracture Mechanics, Vol. 67, pp. 563-572 https://doi.org/10.1016/S0013-7944(00)00074-6