Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

Transverse Vibration of a Uniform Euler-Bernoulli Beam Under Varying Axial Force Using Differential Transformation Method

  • Shin Young-Jae (School of Mechanical Engineering, Andong National University) ;
  • Yun Jong-Hak (School of Mechanical Engineering, Andong National University)
  • Published : 2006.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the application of techniques of differential transformation method (DTM) to analyze the transverse vibration of a uniform Euler-Bernoulli beam under varying axial force. The governing differential equation of the transverse vibration of a uniform Euler-Bernoulli beam under varying axial force is derived and verified. The varying axial force was extended to the more general case which was high polynomial consisted of many terms. The concepts of DTM were briefly introduced. Numerical calculations are carried out and compared with previous published results. The accuracy and the convergence in solving the problem by DTM are discussed.

Keywords

References

  1. Bokaian, A., 1988, 'Natural Frequencies of Beams Under Compressive Axial Loads,' Journal of Sound and Vibration, Vol. 126(1), pp. 49-65 https://doi.org/10.1016/0022-460X(88)90397-5
  2. Bokaian, A., 1990, 'Natural Frequencies of Beams Under Tensile Axial Loads,' Journal of Sound Vibration, Vol. 142(3), pp. 481-498 https://doi.org/10.1016/0022-460X(90)90663-K
  3. Chung, T. J. and Park, Y. J., 1986, 'Dynamic Characteristics of a Beam Subjected to an Axial Force and a Force of Time Dependent Frequency,' Transactions of the KSME, Vol. 10(4), pp. 456-462
  4. Fauconneau, G. and Laird, W. M., 1976, 'Bonds for the Natural Frequencies of a Simply Supported Beam Carrying a Uniformly Distributed Axial Load,' Journal of Mechanical Engineering Science, Vol. 9(2), pp. 70-72
  5. Kuang, Chen. C. and Ho, S. H., 1996, 'Application of Differential Transformation to Eigenvalue Problems,' Applied Mathematics and Computation, Vol. 79, pp. 173-188 https://doi.org/10.1016/0096-3003(95)00253-7
  6. Malik, M. and Dang, H. H., 1998, 'Vibration Analysis of Continuous Systems by Differential Transformation,' Applied Mathematics and Computation, Vol. 96, pp. 17-26 https://doi.org/10.1016/S0096-3003(97)10076-5
  7. McCallion, H., 1973, Viration of Linear Mechanical Systems. Longman, London
  8. Naguleswaran, S., 1991, 'Vibration of a Vertical Cantilever with and Without Axial Freedom at Clamped End,' Journal of Sound and Vibration, Vol. 146(2), pp. 191-198 https://doi.org/10.1016/0022-460X(91)90758-C
  9. Naguleswaran, S., 2004, 'Transverse Vibration of a Uniform Euler-Bernoulli Beam Under Linearly Varying Axial Force,' Journal of Sound and Vibration, Vol. 275, pp. 47-57 https://doi.org/10.1016/S0022-460X(03)00741-7
  10. Schafer, B., 1985, 'Free Vibration of a Gravity Loaded Clamped-free Beam,' Ingenieur-Archiv, Vol. 55, pp. 66-80 https://doi.org/10.1007/BF00539551
  11. Yokayama, T., 1990, 'Vibration of Hanging Timoshenko Beam Under Gravity,' Journal of Sound and Vibration, Vol. 141(2), pp. 245-258 https://doi.org/10.1016/0022-460X(90)90838-Q
  12. Zhou, J. K, 1986, 'Differential Transformation and its Application for Electrical Circuits,' Huazhong University Press, Wuhan China (in Chinese)