참고문헌
- Cho, Young Ho, 'Silicon Micromachining Technology and Industrial MEMS Applications,' Journal of the Korean Society of Precision Engineering, Vol. 17, No.7, pp.52-58, 2000
- Roylance, L. M. and Angell, J. B., 'A batch-fabricated silicon accelerometer,' IEEE Trans. Electron Devices, Vol. ED-26, pp.1887 -1896, 1979 https://doi.org/10.1109/T-ED.1979.19795
- Schmidt, M. A. and Howe, R. T., 'Silicon resonant microsensors,' Ceramic Eng. Science Proc., Vol. 8, No. 9-10, pp. 1911-1917, 1987
-
Rudilf, E., Jornod, A., Bergqvist, J. and Leuthold, H., 'Precision accelerometers with
${\mu}$ g resolution,' Sens. Actuators A, Phys., Vol. 21, No. 1-3, pp. 297-302, 1990 https://doi.org/10.1016/0924-4247(90)85059-D - Matsumoto, Y. and Esashi, M., 'Integrated silicon capacitive accelerometer with PLL servo technique,' Sens. Actuators A, Phys., Vol. 39, No. 1, pp. 209-217, 1993 https://doi.org/10.1016/0924-4247(93)80221-2
- Kuehnel, W. and Sherman, S., 'A surface micromachined silicon accelerometer with on-chip detection circuitry,' Sens. Actuators A, Phys., Vol. 45, No.1, pp. 7-16, 1994 https://doi.org/10.1016/0924-4247(94)00815-9
- Parameswaran, L., Hsu, C. H. and Schmidt, M. A., 'IC process compatibility of sealed cavity sensors,' in Proc. Transducers, pp. 625-628. 1997 https://doi.org/10.1109/SENSOR.1997.613729
- Drieehuizen, van B. P., Maluf, N. I., Opris, I. E. and Kovacs, A. G. T., 'Force-balanced accelerometer with mg resolution, fabricated using silicon fusion bonding and deep reactive ion etching,' in Proc. Transducers, pp. 1229-1230. 1997 https://doi.org/10.1109/SENSOR.1997.635447
- Belloy, E., Sayah, A. and Gijs, M. A. M., 'Micromachining of Glass Inertial Sensors,' Journal of MICROELECTROCHEMICAL SYSTEMS, Vol. 11, No. 1, pp. 85-90, 2002 https://doi.org/10.1109/84.982867
- Belloy, E., Thurre, S., Walckiers, E., Sayah, A. and Gijs, M. A. M., 'The introduction of powder blasting for sensor and micro system applications,' Sensors and Actuators 84, pp. 330-337, 2000 https://doi.org/10.1016/S0924-4247(00)00390-3
- Belloy, E., Sayah, A. and Gijs, M. A. M., 'Powder blasting for three-dimensional microstructuring of glass,' Sensors and Actuators 86, pp. 231-237, 2000 https://doi.org/10.1016/S0924-4247(00)00447-7
- Park, D. S., Seo, T. I., 'Machinability in Oblique Powder Blasting of Glas,' J. of the Korean Society of Precision Engineering, Vol. 21, No.6, pp. 28-34, 2004
- Park, K. H., Oh, Y. T., Park, D. S., 'Mechanical Etching of Micro Pocket by Powder Blasting,' J. of the Korean Society of Precision Engineering, Vol. 19, No.1, pp. 219-226, 2002