Characteristic of Frost Growth on a Cold Cylinder Surface in Cross Flow

직교류 내 원관 표면에서의 서리층 성장 특성

  • Yang Dong-Keun (Graduate School, Department of Mechanical Engineering, hanyang University) ;
  • Kim Min-Soo (Graduate School, Department of Mechanical Engineering, hanyang University) ;
  • Lee Kwan-Soo (School of Mechanical Engineering, hanyang University)
  • Published : 2006.02.01

Abstract

In this paper, frosting experiments were conducted with variations of frosting parameters in order to obtain the correlations of frost properties. As a result, the local thickness, density, and surface temperature of the frost layer were presented. The dimensionless correlations for the frost thickness, frost density, frost surface temperature and heat transfer coefficient were derived as functions of dimensionless frosting parameters by using a dimensional analysis.

Keywords

References

  1. Ostin, R. and Anderson, S., 1991, Frost growth parameters in a forced air stream, Int. J. Heat Mass Transfer, Vol. 14, No. 4/5, pp. 1009-1017
  2. Yanko, J. D. and Sepsy, C. F., 1967, An investigation of the thermal conductivity of frost while forming on a flat horizontal plate, ASHRAE Trans, Vol. 73, No. 2, pp. 1.1-1.11
  3. Tokura, I., Saito, H. and Kishinami, K, 1983, Study on properties and growth rate of frost layers on cold surfaces, J. Heat Transfer, Vol. 105, pp. 895-901 https://doi.org/10.1115/1.3245679
  4. Biguria, G. and Wenzel, L. A., 1970, Measurement and correlation of water frost thermal conductivity and density, I&EC Fundamentals, Vol. 9, No. 1, pp. 129-138 https://doi.org/10.1021/i160033a021
  5. Hosoda, T. and Uzuhashi, H., 1967, Effects of frost on the heat transfer coefficient, Hitachi Review, Vol. 16, No. 6, pp. 254-259
  6. Mao, Y., Besant, R. W. and Rezkallah, K S., 1992, Measurement and correlations of frost properties with airflow over a flat plate, ASHRAE Trans, Vol. 91, pp. 267-281
  7. Mao, Y., Besant, R. W. and Chen, H., 1999, Frost characteristics and heat transfer on a flat plate under freezer operating conditions: Part I, Experimentation and correlations, ASHRAE Trans, Vol. 105, No. 2, pp. 231-251
  8. Yang, D. K. and Lee, K. S., 2004, Dimensionless correlations of frost properties on a cold plate, Int. J. Refrigeration, Vol. 27, No. 1, pp. 89-96 https://doi.org/10.1016/S0140-7007(03)00118-X
  9. Aoki, K, Hattori, M. and Hayashi, Y., 1979, Frost formation on a cylinder surface under forced convection, Proc. 15th International Congress of Refrigeration, Paper No. b1/55
  10. Chung, P. M., Algren, A. B. and Mineneapolis, M., 1959, Frost formation and heat transfer on a cylinder surface in humid air cross flow, Heating, Piping and Air Conditioning, Vol. 30, No. 9, pp. 171-178
  11. Aoki, H., Yamakawa, N. and Ohtani, S., 1981, Forced convective heat transfer around a vertical cylinder under frosting conditions, Heat Transfer- Japanese Research, Vol. 1, pp. 53-63
  12. Schneider, H. W., 1978, Equation of the growth rate of frost forming on cooled surfaces, Int. J. Heat Mass Transfer, Vol. 21, pp. 1019-1024 https://doi.org/10.1016/0017-9310(78)90098-4
  13. Lee, Y. B., Ryu, I. S. and Ro, S. T., 2002, The effect of environmental parameters on frost formation on a horizontal cylinder, Trans. of KSME, Vol. 26, No. 2, pp. 253-260
  14. Cremers, C. J. and Mehra, V. K., 1980, Frost formation on vertical cylinders in free convection, ASME J. Heat Transfer, Vol. 104, No. 1, pp. 3-7
  15. Sengupta, S., Sherif, S. A. and Wong, K. V., 1998, Empirical heat transfer and frost thickness correlations during frost deposition on a cylinder in cross-flow in the transient regime, Int. J, Energy Research, Vol. 22, pp 615-624 https://doi.org/10.1002/(SICI)1099-114X(19980610)22:7<615::AID-ER383>3.0.CO;2-L
  16. Kline, S. J. and McClintock, F. A., 1953, Describing uncertainties in single-sample experiments, Mechanical Engineering, Vol. 75 pp. 3-8