DOI QR코드

DOI QR Code

실트질 모래지반의 비선형 강도 및 강성도 추정법

Estimation of Non-linear Strength and Stiffness for Silty Sands

  • 이경숙 (현대건설㈜ 토목설계실 지반팀) ;
  • 김현주 (연세대학교 건설공학연구소) ;
  • 이준환 (연세대학교 공과대학 사회환경시스템공학부)
  • Lee Kyung-Sook (Department of Geotech. Design, Hyundai Engrg. & Construction Co., Ltd) ;
  • Kim Hyun-Ju (School of Civil & Environmental Engrg., Yonsei Univ.) ;
  • Lee Jun-Hwan (Civil & Environmental Engrg., Yonsei Univ.)
  • 발행 : 2006.01.01

초록

일반적으로 현장지반은 대부분 일정량의 세립분을 포함하고 있으므로 세립분 함유량을 고려한 지반 거동에 관한 연구가 요구된다. 이와 더불어, 기초 지반은 하중초기단계부터 상당한 비선형 거동특성을 나타내고 있어, 응력단계에 따른 지반의 비선형성 또한 매우 중요한 고려사항이다. 본 연구에서는 일련의 실내시험을 수행하여 지반의 전단강도 및 비선형 감쇠 특성을 도출하고자 하였으며, 수정 Hyerbolic 모델을 적용하여 분석된 실트질 모래 지반의 비선형 거동특성은 실트함유량과 상대밀도에 의해 정량화되었다. 실트질 모래 시료의 응력-변형률 곡선을 도출하기 위해 세립분 함유량을 변화시켜가며 일련의 삼축압축시험이 수행되었다. 또한 비선형 특성의 정규화에 요구되는 미소변형률 구간의 초기전단탄성계수의 도출을 위해서 삼축압축시험의 시료조건과 유사한 시료에 대해 공진주시험이 수행되었다. 또한 실트함유량별로 도출된 비선형 특성치는 상대밀도의 영향이 가장 큰 것으로 나타났으며, 상대밀도 증가에 따라 파괴시의 탄성계수의 비인 f값은 감소하고, 지반강성도 감쇠율을 나타내는 9의 경우 증가하는 경향을 나타내었다. 이와 더불어 비선형 특성치를 상대밀도 $D_R$을 간극비로 환산한 절대적 간극비 $e_{sk}$에 따른 정량화 결과의 경우, $e_{sk}$의 증가에 따라 f값은 증가하고 g값은 감소하는 경향을 나타내었다.

In general typically granular soils contain a certain amount of fines. It is also widely recognized that foundation soils under working loads show highly non-linear behavior from very early stages of loading. In the present study, a series of laboratory tests with sands of different silt contents are conducted and methods to assess strength and stiffiness characteristics are proposed. Modified hyperbolic stress-strain model is used to analyze non-linearity of silty sands in terms of non-linear Degradation parameters f and g as a function of silt contents and Relative density Dr. Stress-strain curves were obtained from a series of triaxial tests on sands containing different amounts of silt. Initial shear modulus, which is used to normalize Degradation modulus of silty sands, was determined from resonant column test results. From the laboratory test results, it was observed that, as the Relative density increases, values of f decrease and those of g increase. In addition, it was found that values of f and g increase and decrease respectively as a Skeleton void ratio $(e_{sk})$ increases.

키워드

참고문헌

  1. 김현주 (2005), '과압밀비와 함수비를 고려한 실트질 사질토 지반에서의 비선형 특성에 관한 연구', 석사논문, 연세대학교
  2. Baldi, G., Bellotti, R., Ghiona, V. N., Jamiolkowski, M., and Lo Presti, D. C. F. (1989), 'Modulus of Sand from CPT and DMT', Proceedings of 12th International Conference on Soil Mechanics and Foundation Engineering, Balkelma, Rotterdam, Vol.1, 165-170
  3. Bolton, M. D. (1986), 'The Strength and Dilatancy of Sands', Geotechnique, Vol.36, No.1, pp.65-78 https://doi.org/10.1680/geot.1986.36.1.65
  4. Duncan, J. M. and Chang, C. Y. (1970), 'Nonlinear Analysis of Stress-Strain in Soils', Journal of Soil Mechanics and Foundation Engineering Division, ASCE, 96 (SM5), pp.1629-1653
  5. Fahey, M. and Carter, J. P. (1993), 'A Finite Element Study of the Pressuremeter Test in Sand Using a Non-Linear Elastic Plastic Model', Canadian Geotechnical Journal, Vol.30, No.2, pp.348-361 https://doi.org/10.1139/t93-029
  6. Hardin, B. O. and Black, W. L. (1966), 'Sand Stiffness under Various Triaxial Stresses', Journal of Soil Mechanics and Foundation Engineering Division, ASCE, 92 (SM2), pp.12-17
  7. Hardin, B. O. and Black, W. L. (1966), 'Sand Stiffness under Various Triaxial Stresses', Journal of Soil Mechanics and Foundation Engineering Division, ASCE, 92 (SM2), pp.12-17
  8. Hardin, B.O., and Richart, F.E. (1963), 'Elastic Wave Velocities in Granular Sands', Journal of Soil Mechanics and Foundation Engineering Division, ASCE, 89 (SM1), 33-65
  9. Janbu, N. (1963), 'Soil Compressibility as Determined by Oedometer and Triaxial Tests', In Proceedings of European Conference on Soil Mechanics and Foundation Engineering, Wiesbaden, Germany, Vol.1, 19-25
  10. Kondner, R. L. (1963), 'Hyperbolic Stress-Strain Response: Cohesive Soil', Journal of Soil Mechanics and Foundation Engineering Division, ASCE, 189 (SM1), pp.115-143
  11. Kuerbis, R. and Vaid, Y. P. (1988), 'Sand Sample Preparation- The Slurry Deposition Method', Soil and Foundation, Tokyo, 28(4), 107-118
  12. Lee, J. H. and Salgado, R. (1999), 'Determination of Pile Base Resistance in Sands', Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 125(8), pp.673-683 https://doi.org/10.1061/(ASCE)1090-0241(1999)125:8(673)
  13. Lee, J. H. and Salgado, R. (2000), 'Analysis of Calibration Chamber Plate Load Tests', Canadian Geotechnical Journal, 37(1), pp.14-25 https://doi.org/10.1139/cgj-37-1-14
  14. Salgado, R., Bandini, P., and Karim, A. (2000), 'Stiffness and Strength of Silty Sand', Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 126(5), 451-462 https://doi.org/10.1061/(ASCE)1090-0241(2000)126:5(451)
  15. Salgado, R., Mitchell, J. K., and Jamiolkowski, M. (1997), 'Cavity Expansion and Penetration Resistance in Sand', Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(4), 344-354 https://doi.org/10.1061/(ASCE)1090-0241(1997)123:4(344)
  16. Shibuya S., Tatsuoka F., Teachavorasinskun S., Kong X. J., Abe F., Kim Y., & Park C. (1992), 'Elastic Deformation Properties of Geomaterials', Soil and Foundation, 32(3), 26-46