Numerical Study on Strategy of Applying Low Pressure Loop EGR for a Heavy Duty Diesel Engine to Meet EURO-4 Regulation

저압라인 EGR을 적용한 대형 디젤엔진의 EURO-4 규제 대응 전략에 관한 수치적 연구

  • Ha Changhyun (Hyundai Motor Company) ;
  • Lee Seungjae (Department of Mechanical Engineering, Yonsei University) ;
  • Lee Kyoseung (Department of Automotive Engineering, Kyonggi Institute of Technology) ;
  • Chun Kwangmin (Department of Mechanical Engineering, Yonsei University)
  • Published : 2006.01.01

Abstract

EGR system has been widely used to reduce NOx emission in light duty diesel engines, but its application to heavy duty diesel engine is not common yet. In this study, simulation model for EURO-3 engine was developed using commercial code WAVE and then verified by comparison with experimental results in performance and emission. Possibility to meet EURO-4 regulation using modified EURO-3 engine with LPL EGR system was studied. Each components of the engine was modeled using CATIA and WaveMesher. The engine test mode was ESC 13 and injection timing and quantity were changed to compensate engine performances, because applying EGR causes power reduction. As a results of the simulation, it was found that EURO-4 NOx regulation could be achieved by applying LPL EGR system to current EURO-3 engine even with some BSFC deterioration.

Keywords

References

  1. N. Ladommatos and R. Balian, 'The Efffect: of Exhaust Gas Recirculation on Combustion and NOx Emissions in a High-speed Directinjection Diesel Engine,' SAE 960840, 1996
  2. N. S. Park, J. H. Lee and G. K. Yeo, 'Coupled 1-D/3-D Analysis of Cylinder-to-cylinder EGR Distribution of Intake Manifolds in a HSDI Diesel Engine,' Fall Conference Proceedings, KSAE, pp.441-446, 2004
  3. R. S. G. Baert, D. E. Beckman and A. Veen, 'Efficient EGR Technology for Future HD Diesel Engine Emission Targets,' SAE 1999-01-0837
  4. M. Lejene, D. Lortet and S. Michon, 'Combustion Evelopment for EURO 4,' THIESEL, pp.277-292, 2002
  5. J. B. Heywood, Internal Combustion Engine Fundamentals, 1988