References
- Wu, P. and Little, W. A., 1983, Measurement of friction factors for the flow of gases in very fine channels used for microminiature Joule- Thomson refrigerators, Cryogenics, Vol. 23, pp. 273-277 https://doi.org/10.1016/0011-2275(83)90150-9
- Pfahler, J., Harley, J., Bau, H. H. and Zemel, J., 1990, Liquid transport in micron and submicron channels, J. Sensors and Actuators, Vol. 21, pp.431-434
- Choi, S. B., Barron, R. F. and Warrington, R. O., 1991, Fluid flow and heat transfer in microtubes, Micromechanical Sensors, Actuators, and Systems, DSC- Vol. 32, pp. 123-134
- Peng, X. F., Peterson, G. P. and Wang, B. X., 1994a, Frictional flow characteristics of water flowing through rectangular microchannels, Experimental Heat Transfer, Vol. 7, pp. 249-264 https://doi.org/10.1080/08916159408946484
- Yu, D., Warrington, R., Barron, R. and Ameel, T., 1995, An experimental and theoretical investigation of fluid flow and heat transfer in microtubes, ASME/JSME Thermal Eng. Conf., Vol. 1, pp.523-530
- Peng, X. F. and Peterson, G. P., 1996, Forced convection heat transfer of single-phase binary mixtures through microchannels, Experimental Thermal and Fluid Science, Vol. 12, pp. 98-104 https://doi.org/10.1016/0894-1777(95)00079-8
- Mala, G. M. and Li, D., 1999, Flow characteristics of water in microtubes, Int. J. Heat and Fluid Flow, Vol. 20, pp. 142-148 https://doi.org/10.1016/S0142-727X(98)10043-7
- Faghri, M. and Turner, S. E., 2003, Gas flow and heat transfer in microchannels, Proc. of SAREK Summer Annual Conference, June 2-4, Muju, Korea, pp. 542-550
- Tu, X. and Hrnjak, P., 2003, Experimental investigation of single-phase flow pressure drop through rectangular microchannels, 1st International Conference on Microchannels and Minichannels, April 24-25, 2003, Rochester, New York, USA
- Li, D. and Garimella, S. V., 2004, Investigation of liquid flow in microchannels, AIAA Journal of Thermophysics and Heat Transfer, Vol. 18, pp. 65-72 https://doi.org/10.2514/1.9124
- Moriyama, K., Inoue, A. and Ohira, H., 1992, The thermohydraulic characteristics of two-phase flow in extremely narrow channels (the frictional pressure drop and void fraction of adiabatic two-component two-phase flow), Trans. JSME (Ser. 8), Vol. 58, pp. 401-407
- Lockhart, R. W. and Martinelli, R. C., 1949, Proposed correlation of data for isothermal two-phase two-component flow in pipes, Chem. Eng. Prog., Vol. 45, p. 39
- Mishima, K. and Hibiki, T., 1996, Some characteristics of air-water two-phase flow in small diameter vertical tubes, Int. J. Multiphase Flow, Vol. 22, No. 4, pp. 703-712 https://doi.org/10.1016/0301-9322(96)00010-9
- Lee, H. J. and Lee, S. Y., 2001, Heat transfer correlation for boiling flows in small rectangular horizontal channels with low aspect ratios, Int. J. Multiphase Flow, Vol. 27, pp. 2043-2062 https://doi.org/10.1016/S0301-9322(01)00054-4
- Coleman, H. W. and Steele, W. G., 1989, Experimentation and uncertainty analysis for engineers, John Wiley and Sons Inc
- Obot, N. T., 2002, Toward a better understanding of friction and heat/mass transfer in microchannels - A literature review, Microscale Thermophysical Engineering, Vol. 6, pp. 155-173 https://doi.org/10.1080/10893950290053295