한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제14권4호
  • /
  • Pages.107-114
  • /
  • 2006
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지

웹기반 재료 데이터베이스 구축 및 자동차 엔진풀리용 재료선정 예

Construction of Web-based Material Database and Case Study of Material Selection for Automotive Engine Pulley

  • Chun, Doo-Man (School of Mechanical and Aerospace Engineering, Seoul National University) ;
  • Ahn, Sung-Hoon (School of Mechanical and Aerospace Engineering, Seoul National University) ;
  • Jang, Jae-Duk (Korea Powertrain Co., Ltd.)
  • 발행 : 2006.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Material selection is one of the important activities in design and manufacturing. A selected material at the conceptual design stage affects functionality of the designed part as well as manufacturability and cost of the final product. Unfortunately there are not many accessible material databases that can be used for design. In this research, a web-based material database was constructed. In order to assist designers to compare different materials, two-dimensional and three-dimensional graphs were provided via the web browser Using these graphical tools, multi-dimensional comparison was available in more intuitive manner. As a case study, this system was applied for material selection of an automotive engine pulley.

키워드

참고문헌

  1. D. H. Jee and K. J. Kang, 'A Method of Optimal Material Selection for Automobiles Aided with Database,' KSAE J., Vol.7, No.2, pp.398-407, 1999
  2. M. F. Ashby, Y. J. M. Brechet, D. Cebon and L. Salvo, 'Selection Strategies for Materials and Processes,' Materials and Design, Vol.25, pp.51-67, 2004 https://doi.org/10.1016/S0261-3069(03)00159-6
  3. http://cybercut.berkeley.edu/mas2
  4. http://www.nist.org
  5. http://www.matweb.com
  6. http://www.grantadesign.com
  7. http://fact.kisti.re.kr
  8. M. F. Ashby and K. Johnson, Materials and Design, Butterworth-Heinemann, Oxford, 2003
  9. L. Holloway, 'Materials Selection for Optimal Environmental Impact in Mechanical Design,' Materials and Design, Vol.19, pp.133-143, 1998 https://doi.org/10.1016/S0261-3069(98)00031-4
  10. M. F. Ashby, Materials Selection in Mechanical Design 2nd, Butterworth-Heinemann, Oxford, 1999
  11. E. White, C. Garrett and S. Robinson, 'GDI+ Programming,' Wrox, 2003
  12. http://www.web3d.org
  13. http://www.octaga.com
  14. http://www.vcom3d.com
  15. A. C. Ugural, 'Stresses in Plates and Shells 2nd,' McGraw-Hill, New York, 1999
  16. H. Oka, Y. Tabuchi and H. Yazawa, 'Development of Plastic Pulley for Automotive Air Conditioner Compressor,' SAE 2002-01-0603, 2002