Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Micro Manufacturing Technology for 3-Dimensional Micro Parts

마이크로 3차원 입체형상부품 제조기술 연구

  • 제태진 (한국기계연구원) ;
  • 최두선 (한국기계연구원 나노공정장비연구센터) ;
  • 이응숙 (한국기계연구원 나노공정장비연구센터) ;
  • 황경현 (한국기계연구원 나노공정장비연구센터) ;
  • 신보성 (부산대학교 정밀정형 및 금형가공연구소) ;
  • 이종찬 (금오공대 기계설계공학과)
  • Published : 2006.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Demands for micro parts have increased with recent advances in IT and machinery industries. However, the present technology loaves much to be desired to effectively produce parts with the volume of $1mm^{3}$ and less by mechanical method in large quantities. This paper provides a method for efficient quantity production of complete micro 3D structure using micro end-milling cutting process. The possibility has proven via manufacturing experiment of a multistage micro complex gear structure of $500{\mu}m$ in length, $500{\mu}m$ in maximum external diameter and a volume of $1mm^{3}$ and less.

Keywords

References

  1. 1995, Computer Aided Ultra-precision Micromachining of Metallic Material Yoshimi TAKEUCHI, Kiyoshi SAWADA and Toshio SATA Proc. of IEEE Int. Conf. on Robotics and Automation, Nagoya, pp. 67-72
  2. Yutaka Yamagata, Toshiro Higuchi, 1995, Micro Fabrication by Precision Technique, JSPE, Vol. 61, No.10, pp. 1361-1368
  3. 제태진, 지도교수 이종찬, 2004. 6, 마이크로 부품제조를 위한 미세 절삭공정 연구, 금오공대 박사학위논문
  4. T. Je, J. Lee, D. Choi, E. Lee, B. Shin, 2003, Development of a Micro Machining for Fabrication of Micro parts, Key Materials, Vol. 238-239, pp. 383 -388 https://doi.org/10.4028/www.scientific.net/KEM.238-239.383
  5. T. J. Je, J. C. Lee, D. S. Choi, E. S. Lee, B. S. Shin, K. H. Whang, 2004, A Study of the Micro Pole Structure Fabrication and Application Technology by Micro End-Milling Process, KEY ENGINEERING MATERIALS, Vol. 257-258 https://doi.org/10.4028/www.scientific.net/KEM.257-258.257
  6. E. S. Lee, Y. J. Shin, J. H. Kang, T. J. Je, J. K. Lee, H. Y. Lee, 2000, Development of Micro Mold Machining Technology, Proceeding of Korea Society of Precision Engineering, p. 1047
  7. B. S. Shin, D. Y. Yang, D. S. Choi, E. S. Lee, T. J. Je, K. H. Whang, 2003, Rapid Manufacturing of3D Shaped Products by Multi-face High-speed Key Engineering Materials, pp. 399-404
  8. 1996, Ultraprecision 3D Micromachining of Glass Yoshimi TAKEUCHI, Kiyoshi SAWADA, and Toshio SATA Annals of CIRP, Vol. 45/1, 401-404
  9. Y. Yamagata, 1997, Microfabrication by Ultra Cutting, RIKEN Symposium, Vol. 1

Cited by

  1. Study on Micro Endmilling Process for Manufacturing of Very Small Gear Parts and Mold with Two-Stage vol.19, pp.2, 2010, https://doi.org/10.5228/KSPP.2010.19.2.107