Transactions of Materials Processing (소성∙가공)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of the Design Parameter for Internal Spline Forming Using the Tube

중공축 내접 스플라인 성형을 위한 설계변수의 영향

  • 왕창범 (공주대학교 기계자동차공학부 대학원) ;
  • 임성주 (한국생산기술연구원) ;
  • 박용복 (공주대학교 기계자동차공학부)
  • Published : 2006.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the cold extrusion process for internal spline forming using a thin and long tube has been analyzed by using a rigid plastic finite element code. The internal spline consists of 10 tooths. The cold extrusion process has been focused on the comparisions of load-stroke relation and filling states of the teeth according to design parameters. The design parameters involve extrusion ratio, extrusion angle and friction factor. The internal spline forming can cause the buckling and folding during the cold extrusion process because of using a thin and long tube. The optimum design parameters have been obtained through rigid-plastic finite elements analysis. The extrusion ratio and extrusion angle have great effects on the deformation characteristics of the cold extrusion process.

Keywords

References

  1. S. D. Lee, 1999, Int. J. of Korea Society of Industial Application, Vol. 2, No. 2, pp. 187-194
  2. O. P. Grover, B. L. Juneja, 1984, Analysis of Closed-Die Forging of Gear-Like Elements, Advanced Tech. of Plasticity, Vol. 2, pp. 888-893
  3. N. A. Abdul, T. A. Dean, 1986, An Anlysis of the forging of Spur gear Forms, Int. J. Mach. Tool Des. Res., Vol. 26, No. 2, pp. 113-123 https://doi.org/10.1016/0020-7357(86)90212-X
  4. 조해용, 최종웅, 민규식, 1996, 중공 및 중실소재를 이용한 스플라인의 단조에 관한 연구, 한국정밀공학회지, 제 13 권 제 1 호, pp. 108-115
  5. 김용조, 김현수, 이승동, 2000, 유한요소법에 의한 내접 스플라인 기어형상의 폐쇄단조공정해석 , Journal of Advanced Materials, 경남대학교 신소재연구소, Vol. 12, pp. 33-38 https://doi.org/10.1002/(SICI)1521-4095(200001)12:1<33::AID-ADMA33>3.0.CO;2-B
  6. 김성현, 이호용, 2005, 중공축 소재를 이용한 전후방 복합압출의 성형 특성, 소성가공학회지, 제 14 권 제 9 호, pp. 772- 778 https://doi.org/10.5228/KSPP.2005.14.9.772
  7. S. Kobayashi, S. I. Oh, T. Altan, 1989, Metal Forming and the Finite-Element Method, New York Oxford University Press
  8. O. C. Zienkiewicz, 1977, The Finite Element Method, 3rd Ed McGraw-Hill, New York
  9. 송두호, 박용복, 김민응, 2000, 단달림 형상의 예비성형체 성형에 대한 전방압출과 업셋팅공정의 비교, 소성가공학회 2000년 춘계학술대회 논문집, pp. 82-85

Cited by

  1. Study on Cold Forward Extrusion Formality Analysis along with Tool Entrance Angle of Helical Gear for Electronic Parking Brake Using Finite Element Analysis vol.32, pp.11, 2015, https://doi.org/10.7736/KSPE.2015.32.11.977
  2. The Study for Cold Forging of Spline with Different Friction Factor on Die Surface vol.33, pp.2, 2009, https://doi.org/10.5916/jkosme.2009.33.2.295