DOI QR코드

DOI QR Code

A RANS-based Simulation for the Prediction of Hydrodynamic Rolling Moments around Rectangular Cylinders with Free Surface

자유수면을 포함한 사각기둥의 횡동요 유체동역학 수치해석

  • Kim, Su-Whan (Maritime & Ocean Engineering Research Institute, KORDI) ;
  • Kim, Kwang-Soo (Maritime & Ocean Engineering Research Institute, KORDI) ;
  • Park, Il-Ryong (Maritime & Ocean Engineering Research Institute, KORDI) ;
  • Van, Suak-Ho (Maritime & Ocean Engineering Research Institute, KORDI) ;
  • Kim, Jin (Maritime & Ocean Engineering Research Institute, KORDI)
  • 김수환 (한국해양연구원 해양시스템안전연구소) ;
  • 김광수 (한국해양연구원 해양시스템안전연구소) ;
  • 박일룡 (한국해양연구원 해양시스템안전연구소) ;
  • 반석호 (한국해양연구원 해양시스템안전연구소) ;
  • 김진 (한국해양연구원 해양시스템안전연구소)
  • Published : 2006.12.20

Abstract

Accurate prediction of ship dynamics, particularly roll motion, is very important in ship safety. In the past, empirical or vortex based methods were commonly used for the hydrodynamic roll damping predictions but they could not be applied to practical ship roll motion cause of limitations about geometries ad design conditions. Recently RANS-based techniques are developed for the practical ship motion analysis. In this study, RANS based roil analysis about a rectangular cylinder with WAVIS developed by MOERI/KORDI are performed and compared with the experimental data and other RANS results.

Keywords

References

  1. 김우전, 김도현, 반석호, 2000, '유한체적법을 이용한 상선주위의 난류유동 계산에 관한 연구,' 대한조선학회 논문집, 제 37권, 제 4호, pp. 19-31
  2. 박일룡, 김진, 반석호, 2004, 'Level-Set법을 이용한 일반상선의 저항성능 해석,' 대한조선학회 논문집, 제 41권, 제 2호, pp. 63-73
  3. 박일룡, 김진, 반석호, 김우전, 2005, 'VOF법의 자유수면 포착정도 향상을 위한 연구,' 대한조선학회 논문집, 제 42권, 제 2호, pp. 88-97 https://doi.org/10.3744/SNAK.2005.42.2.088
  4. 박일룡, 전호환, 2002, '자유표면을 가지는 점성유동장 내의 기포거동에 관한 기초해석,' 대한조선학회 논문집, 제 29권, 제 1호, pp. 16-27
  5. Gentaz L., Alessandrini B., and Delhommeau G., 1997, 'Motion Simulation of a Two Dimensional Body at the Surface of a Viscous Fluid by a Fully Coupled Solver,' 12th International Workshop on Water Waves and Floating Bodies, pp. 85-89
  6. Himeno Y., 1981, Prediction of Ship Roll Damping: State of Art, University of Michigan, Department of Naval Architecture, Report No. 239, Ann Arbor
  7. Ikeda Y., Himeno Y., and Tanaka, N., 1978, A Prediction Method for Ship Roll Damping, Report No. 00405 of the Department of Naval Architecture, University of Osaka Perfecture
  8. Ikeda Y. and Himeno Y., 1981, 'Calculation of Vortex-shedding Flow around Oscillating Circular and Lewis-form Cylinder,' Proceedings of the Third International Conference on Numerical Ship Hydrodynamics
  9. Jouette C. Laget O., and Gouez J.M., 1999, Vers la Tenue a la Mer des Navires par Une Formuation en Fluide Visqueuz,' 7e Journees De L'Hydrodynamique
  10. Korpus R.A. and Falzarano J.M., 1997, 'Prediction of Viscous Ship Roll Damping by Unsteady Navier-Stokes Techniques,' Journal of Offshore Mechanics and Arctic Engineering, Vol. 119, pp. 108-113 https://doi.org/10.1115/1.2829050
  11. Sarkar T. and Vassalos D., 2000, 'A RANS-based Technique for Simulation of the Flow near a Rolling Cylinder at the Free Surface,' Journal of Marine Science and Technology, Vol. 5, op. 66-77 https://doi.org/10.1007/s007730070012
  12. Scolan Y.M. and Faltinsen O., 1994, 'Numerical Studies of Separated Flow from Bodies with Sharp Corners by the Vortex in Cell Method,' Journal of Fluids and Structures, Vol. 8, pp. 201-230 https://doi.org/10.1006/jfls.1994.1010
  13. Yeung R.W., Liao S.W. and Roddier D., 1998, 'On Roll Hydrodynamics of Rectangular Cylinder,' Proceedings of the 8th International Offshore and Polar Engineering Conference, Vol. 3, pp. 445-453

Cited by

  1. Numerical Analysis of Ship Motions in Beam Sea Using Unsteady RANS and Overset Grid Methods vol.45, pp.2, 2008, https://doi.org/10.3744/SNAK.2008.45.2.109