지하 대공간 숏크리트 품질관리를 위한 현장강도 시험기술에 관한 연구

A Study on Field Testing Methods for the Shotcrete Quality Control of Large Underground Spaces

  • 발행 : 2006.10.31

초록

지하대공간 건설에 있어서 숏크리트는 가장 중요한 지보재임은 주지의 사실이다. 숏크리트의 강도는 현장 배합 및 타설 조건에 따라 실험실 조건의 숏크리트와는 큰 차이를 보이는 것이 일반적이다. 구조부재인 일반 콘크리트와 달리 숏크리트의 초기강도는 지하공간의 초기 안정화에 매우 중요하다. 그러나, 숏크리트 초기강도의 측정은 적절한 현장강도시험방법의 부재로 인하여 잘 관리되지 않은 실정이다. 따라서, 현장에서 숏크리트 초기강도를 효과적으로 측정할 수 있는 방법이 요구되고 있는 실정이다. 본 논문에서는 핀관입시험법 및 점하중강도시험법의 현장 숏크리트 초기강도 측정에 대한 적합성을 검토하였다. 이를 위해 다양한 양생강도에 따른 일축압축시험, 핀관입시험, 점하중시험을 수행하여 일축압축강도에 대한 신뢰성 높은 핀관입깊이와 점하중 지수의 상관관계식을 도출하였다.

It is well known that shotcrete is the most important support member for the construction of large underground spaces. Generally, the strength of the field shotcrete is heavily dependent on the field mixing and spraying conditions so that it is different from the strength of the shotcrete mixed in laboratories. As a support member, the early strength of shotcrete unlike concrete is very important to the initial stabilization of the underground spaces. Therefore, the field methods to efficiently test the early strength of shotcrete have been highly required. This paper aimed to verify the pneumatic pin penetration test and the point load test for measuring the early strength of the field shotcrete. As a result of the experiments through a series of uniaxial compression, pin penetration, and point load tests for the range of the early shotcrete strength, two equations to estimate reliably the uniaxial compressive strength by the pin penetration and the point load tests were acquired.

키워드

참고문헌

  1. 이석원, 배규진, 장수호, 박해균, 이명섭, 김재권, 2003, 숏크리트의 압축강도를 추정하기 위한 공기압식 핀관입시험의 적용성 평가, 대한토목학회 정기학술대회 논문집, pp, 4723-4728
  2. 장석부, 홍의준, 문상조, 2005a, 숏크리트 품질관리를 위한 현장 압축강도시험법에 관한 연구,한국터널공학회 춘계학술발표회 논문집, pp. 175-186
  3. 장석부, 홍의준, 문상조, 2005b, 숏크리트 부착강도가 절리암반 터널지보에 미치는 영향에 관한 연구, 한국지구시스템공학회, 추계학술발표회 논문집, pp. 163-167
  4. 장석부, 홍의준, 문상조, 2005c, 대단면 암반터널의 안정성에 미치는 숏크리트 부착강도의 영향에 관한 연구, 한국터널공학회 논문집, 7(4), pp. 305-311
  5. 터널설계기준, 1999, 한국터널공학회
  6. Brown E. T. 1981, Rock characterization testing & monitoring, ISRM
  7. Iwaki, K, A. Hirama, K. Mitani, S. Kaise, K. Nakagawa. 2001, A quality control method for shotcrete strength by pneumati pin penetration test, NDT & E International 34, pp. 395-402 https://doi.org/10.1016/S0963-8695(01)00006-8
  8. Grasso, P. et. al. 1992, Problem and promises of index tesing of rocks, Rock Mechanics, Tillerson & Wawersik (eds), pp. 879-888
  9. Melbye, T. 2001, Sprayed concrete for rock support, MBT International, pp. 154-155