DOI QR코드

DOI QR Code

The Factors Affecting the Unconfined Compressive Strength of C.S.G Materials

C.S.G 재료의 일축압축강도에 미치는 영향인자

  • 김기영 (한국수자원공사 댐기술연구소)
  • Published : 2006.10.31

Abstract

C.S.G is a material made by adding cement and water to rock-like material such as riverbed gravel or excavation muck that can be obtained easily near dam si. Recently, the use of C.S.G is gradually increasing as the construction material for dam, road, revement and so on. Commonly, the strength characteristics of C.S.G is affected by various influence factors such as grade, unit cement, age and water contents. In this study, a series of compaction test and unconfined compressive strength test were performed to investigate the relationship between a strength and influence factors such as three kinds of gradation, age, unit cement and water contents with riverbed gravel in Hwa Buk dam. The results show that strength Properties of C.S.G is variously affected by these influence factors. Especially, gradation and water contents are found to be very important factors fur determining the strength of C.S.G material. And, from the results of experimental study, the correlation equations between uncompressive strength and these factors are proposed.

C.S.G(Cemented Sand and Gravel) 재료는 댐 수몰지로부터 쉽게 얻을 수 있는 굴착토와 하상자갈에 소량의 시멘트와 물을 혼합한 재료를 총칭하는 것으로 최근 댐, 도로, 호안등의 건설재료로 그 활용성이 점차 증가하고 있다. 통상적으로 C.S.G 재료의 강도특성은 입도분포, 단위시멘트량, 재령, 그리고 함수비 등과 같은 여러 가지 요소에 의하여 영향을 받는 것으로 보고되고 있다. 본 연구에서는 화북댐 유역의 하상자갈을 3가지 종류의 입도분포로 재구성하여 재령, 단위시멘트량 그리고 함수비의 혼합 비율에 따른 일축압축강도의 변화를 연구하였다. 실험결과 C.S.G 재료의 일축압축강도는 상기 영향 인자들에 의하여 다양하게 영향을 받았으며, 특히 입도분포와 단위수량은 C.S.G 재료의 강도를 결정하는데 매우 중요한 인자임을 알 수 있었다. 또한 이러한 실험적 결과를 토대로 각 영향인자를 고려한 강도 예측식을 제안함으로써 설계 및 시공에 필요한 기초적인 자료를 제공하고자 한다.

Keywords

References

  1. 김기영, 박한규, 전제성(2005), 'Cemented Sand and Gravel 재료의 강도특성', 한국지반공학회 논문집, 제21권 10호 pp.61-71
  2. 김기영, 박한규 외 2인(2005), 'CSG 재료의 강도특성에 관한 연구', 한국지반공학회 학술발표회논문집, pp.619-626
  3. Clough, G. W., Iwabuchi, J., Rad, N. S., and Kuppusamy, T. (1990), 'Influence of cementation on liquefaction of sands', ASCE, Vol.115, No.8, pp.1102-1117 https://doi.org/10.1061/(ASCE)0733-9410(1989)115:8(1102)
  4. Huang, J. T., and Airey, D. W. (1998), 'Properties of artificially cemented carbonate sand', ASCE, Vol.124, No.6, pp.492-499 https://doi.org/10.1061/(ASCE)1090-0241(1998)124:6(492)
  5. Lama, R. D., and Vutukuri, V. S. (1978), 'Handbook on mechanical properties of rocks', Vol.2 Trans Tech, Clansthal, Germany
  6. Matthews, M. C, and Clayton, C R. I. (1993), 'Influence of intact porosity on the engineering properties of a weak rock', Geotechnical engineering of hard soils-soft rocks, Anagnostopoulos et al., eds. A. A. Balkema, Rotterdam, The Netherlands, Vol.1 pp.693-702
  7. Mostafa, A. I., Hackmet, A. J., Wee, H. S., and Mark, F. R. (2002), 'Effect of cement type on shear behavior of cemented calcareous soil', ASCE, Vol.128, No.6, pp.520-529 https://doi.org/10.1061/(ASCE)1090-0241(2002)128:6(520)
  8. Okuyama, Y., Yoshida, T., Tatsuaka, F., Sato, N. and Oie, M. (2003), 'Shear banding characteristics of granual materials and partical size effects on the sesmic stability of earth structures', Proc. 3rd Int. Symp. on Deformation Characteristics of Geomaterials. Di, B. ed., Lyon, pp.607-616
  9. Toshio, H., Tadahiko, F., Hideaki, K., and Takashi, S. (2003), 'Design concept of trapezoid-shaped CSG dam', Roller Compacted Concrete Dams cd., Berga et al., pp.457-464
  10. Watanabe, K., Tateyama, M., Jiang, G. L., Tatsuoka, F., and Lohani, T. N. (2003), 'Strength charateristics of cement mixed gravel evaluated by large triaxial compression test', Proc. 3rd Int. Symp. on Deformation Characteristics of Geomaterials. Di, B. ed., Lyon, pp.683-693