초록
액체로켓엔진 개발에서 필수 단계인 연소안정성 확인을 위한 연소안정성 평가시험(stability rating test) 방법의 개발을 위해서는 압력교란장치의 특성과 더불어 안전한 연소시험 절차(sequence)의 확립이 필수적이다. 따라서 본 연구에서는 연소안정성 평가시험을 위해 개발된 펄스건을 액체로켓엔진의 연소시험에 실제로 적용하기 위한 단계로서, 적절한 연소 시험 절차를 개발/검증하고자 하였다. 먼저 펄스건을 실제로 연소실 외벽에 장착하게 되는 압력파 유도장치를 설계하고, 펄스건의 오작동을 방지하기 위한 압력파 유도장치 내부의 냉각시스템의 설계 및 시험을 수행하였다. 이러한 일련의 연소시험 단계를 통하여 실물형 액체로켓엔진에서의 연소안정성 평가시험이 가능한 적절한 시험 단계를 국내 독자적으로 개발하는데 성공하였다.
The SRT(stability rating test) technique, which is indispensable for the development of a LRE(liquid rocket engine), essentially requires a development of a combustion test sequence as well as artificial perturbation devices. For the development of an indigenous SRT technique, several combustion tests of sub-scale LRE were performed to search a proper combustion test sequence. At first, a pressure-wave inducing device which is used for adapting pulse gun was designed and a cooling gas supply system for the pressure-wave inducing device was set up to prevent a malfunction of pulse gun. Through the several combustion tests which included cooling procedure of a pressure-wave inducing device, a proper combustion test sequence was found out. It did not make any significant disturbance at normal combustion process. Finally, an indigenous SRT technique has been developed successfully.