References
- Bischak, D. P. and Stevens, K. B. JR., 1995, 'An evaluation of the tandem configuration automated guided vehicle system,' Production Planning & Control, Vol.6 438-444 https://doi.org/10.1080/09537289508930301
- Bozer, Y. A., and Shrinivasan, M. M., 1989, 'Tandem configurations for AGV systems offer simplicity and flexibility,' Industrial Engineering, Vol.21, 23-27
- Bozer, Y. A., and Shrinivasan, M. M., 1991, 'Tandem configurations for automated guided vehicle systems and the analysis of single vehicle loops,' IIE transactions, Vol.23, 72-82 https://doi.org/10.1080/07408179108963842
- Egbelu, P. J. and Tanchoco, J. M. A., 1984, 'Characterization of automatic guided vehicle dispatching rules,' Int. J. Prod. Res., Vol.22, 259-274
- Egbelu, P. J. and Tanchoco, J. M. A., 1986, 'Potential for bidirectional guide path of automated guided vehicle based systems,' Int. J. Prod. Res., Vol.24, 1075-1097 https://doi.org/10.1080/00207548608919789
- Egbelu, P. J., 1993, Concurrent specification of unit load sizes and automated guided vehicle size in manufacturing system,' Int. J. of Prod. Economics, Vol.29, 695-712
- Gaskins, R. J., and Tanchoco, J. M. A., 1987, 'Flow path design for automated guided vehicle systems,' Int. J. Prod. Res., Vol. 25, 667-676 https://doi.org/10.1080/00207548708919869
- Gaskins, R. J., and Tanchoco, J. M. A., 1990, 'Optimal flow path design of unidirectional AGV systems,' Int. J. Prod. Res., Vol.28, 1023-1030 https://doi.org/10.1080/00207549008942772
- Goetz, W. G., and Egbelu, P. J., 1990, Guide path design and location of load pick-up/drop-off points for an automated guided vehicle system,' Int. J. Prod. Res., Vol.28, 927-941 https://doi.org/10.1080/00207549008942764
- Lin, J. T., Chang, C. C. K. and Liu, W-C., 1994, 'A load-routing problem in a tandem-configuration automated guided-vehicle system,' Int. J. Prod Res, Vol.32, 411-427 https://doi.org/10.1080/00207549408956941
- Lin, J. T. and Dgen, P.-K., 1994, 'An algorithm for routing control of a tandem automated guided vehicle system,' Int. J. Prod. Res., Vol.32, 2735-2750 https://doi.org/10.1080/00207549408957097
- Mahadevan, B. and Narendran, T. T., 1990, 'Design of an automated guided vehicle-based material handling system for a flexible manufacturing system,' Int. J. Prod. Res., 1611-1622
- Maxwell, W. L. and Muckstadt, J. A., 1982, 'Design of automatic guided vehicle systems,' IIE Transactions, Vol.14, 114-124
- Sinriech, D. and Tanchoco, J. M. A., 1991, 'The centroid projection method for locating pick-up and delivery stations in single-loop AGV systems,' J. of Manufacturing Systems, Vol. 11, 297-307
- Sinriech, D. and Tanchoco, J. M. A., 1992, 'An economic model for determining AGV fleet size,' Int. J. Prod. Res., Vol. 30, 1255-1268 https://doi.org/10.1080/00207549208942955
- Sinriech, D. and Tanchoco, J. M. A., 1992, 'Impact of empty vehicle flow on performance of single-loop AGV systems,' Int. J. Prod. Res., Vol. 30, 2237-2252 https://doi.org/10.1080/00207549208948152
- Tanchoco, J. M. A., 1994, Material flow systems in manufacturing, Chapman & Hall, London
- Tanchoco, J. M. A. and Sinriech, D., 1992, 'OSL-Optimal single-loop guide paths for AGVS,' Int. J. Prod. Res., Vol. 30, 665-681 https://doi.org/10.1080/00207549208942917
- Tomkins, J. A, and White, J. A., Bozer, Y. A., Frazelle, E. H., Tanchoco, J. M. A. and Trevino, J., 1996, Facilities Planning, Wiley, New York
- Tanchoco, J. M. A., Egbelu, P. J., and Taghaboni, F., 1987, 'Determination of the total number of vehicles in an AGV-based material transport system,' Material Flow, 4, 33-51
- Bilge, Umit, 1997, 'AGV systems with multi-load carriers : basic issues and potential benefits,' Journal of Manufacturing Systems, Vol. 16, No. 3, 159-174 https://doi.org/10.1016/S0278-6125(97)88885-1
- Occena, Luis G. and Yokota, Toshiya, 1991, 'Modelling of an automated guided vehicle system (AGVS) in a just-in-time (JIT) environment,' Int. J. Prod. Res. Vol. 29, No. 3, 495-511 https://doi.org/10.1080/00207549108930085
- Ozden, Mufit, 1988, 'A simulation study of multiple-load-carrying automated guided vehicles in a flexible manufacturing system,' Int. J. Prod. Res. Vol. 26, No. 8, 1352-1366
- Egbelu, P. J., 1987, 'The use of non-simulation approaches in estimating in an automated guided based transport system.' Material flow, Vol. 4, 17-32