한국섬유공학회지 (Textile Science and Engineering)

  • 제42권1호
  • /
  • Pages.29-34
  • /
  • 2005
  • /
  • 1225-1089(pISSN)
  • /
  • 2288-6419(eISSN)
한국섬유공학회 (The Korean Fiber Society)
권호 표지

연신 heat plate 온도가 폴리에스터 섬유의 구조와 염색성에 미치는 영향

Effects of Heat-plate Temperature in Drawing Process on the Structure and Dyeing Properties of Polyester Fibers

  • 조현태 (숭실대학교 공과대학 섬유공학과) ;
  • 김우섭 (숭실대학교 공과대학 섬유공학과)
  • Cho Hyeon Tae (Department of Textile Engineering Soongsil University) ;
  • Kim Woo Sup (Department of Textile Engineering Soongsil University)
  • 발행 : 2005.02.01
⟨ 이전 논문 다음 논문 ⟩

초록

Effects of heat-set temperature in yarn formation process on the structure and properties of two different polyester fibers, undrawn yarn (UDY) and partially-oriented yarn (POY), were investigated. Drawing temperature was fixed at $80^{\circ}C$ for UDY and $90^{\circ}C$ for POY which had been determined as the optimum temperature in a previous study. The heat plate temperature was varied by $5^{\circ}C$ intervals near the critical crystallization temperature ($T_{cc}$) of polyester in order to determine the effects of the temperature changes on the orientation, crystallization, fiber evenness, mechanical and dyeing properties of the polyester fibers. Results indicated that the heat plate temperature did not have a great effect on the mechanical properties and evenness of the fibers. However, a marginal reduction of dye exhaustion and dyeing rate was caused with increase in heat plate temperature. These effects were discussed with respect to the structural changes of the fibers in the fiber formation process.

키워드

참고문헌

  1. H. T. Cho and W. S. Kim, 'Effects of Drawing Conditions on the Structure and Dyeing Properties of Polyester Fiber(I)-Effect of Drawing Temperature', J Korean Fiber Soc, 2000, 37, 111-1177
  2. T. J. Park, S. H. Yu, and H. T. Cho, 'Studies on the Structure and Dyeing Properties of Polyester Fiber(I)-Effect of Takeup Speed on the Structure and Dyeing Properties', J Korean Fiber Soc, 1998, 35, 781-787
  3. S. H. Cho and H. T. Cho, 'Studies on the Structure and Dyeing Properties of Polyester Fiber(II) - Structure and Dyeing Properties of Annealed High Speed Spun PET Fiber', J Korean Fiber Soc, 1998, 35, 788-794
  4. H. T. Cho and S. H. Yuo, 'Structure and Dyeing Properties of Polyester Filament Fiber Containing Diethylene Glycol Unit', J Korean Fiber Soc, 2003, 40, 482-491
  5. H. J. Biangardi and H. G. Zachmann, 'Influence of the Arrangement of the Crystal and the Structure of the Non Crystalline Regions on the Mechanical Properties of Polyethylene Terephthalate', J Polym Sci Polym Sym, 1977, 58, 169-183
  6. V. B. Gupta and S. Kumar, ''The Effect of Heat Setting on the Structure and Mechanical Properties of Poly(ethylene terephthalate) Fiber. I. Structural Changes', J Appl Polym Sci, 1981, 26, 1865-1876 https://doi.org/10.1002/app.1981.070260611
  7. A. Misra and R. S. Stein, 'Stress Induced Crystallization of Poly(ethylene terephthalate)', J Polym Sci Polym Phys Ed, 1979, 17, 235-257 https://doi.org/10.1002/pol.1979.180170205
  8. G. M. Venkatesh, P. J. Bose, R. V. Shah, and N. E. Dweltz, 'Studies of Heating and Cooling of Synthetic Fibers, Yarns, and Fabrics. I. Properties of Nylon and Polyester Filament Yams on Heat Setting in Silicone Oil', J Appl Polym Sci, 1978, 22, 2357-2377 https://doi.org/10.1002/app.1978.070220825
  9. V. B. Gupta, C. Ramesh, and A. K. Gupta, 'Structure-Property Relationship in Heat-Set Poly(ethylene terephthalate) Fibers. I. Structure and Morphology', J Appl Polym Sci, 1984, 29, 3115-3129 https://doi.org/10.1002/app.1984.070291015
  10. J. O. Warwicker, 'The Structural Causes of Variations in Dyeing Properties of Terylene Yam Subjected to Dry and Wet Heat', J Soc Dyers Colourist, 1972, 88, 142-148
  11. A. Johnson, 'The Theory of Coloration of Textiles', 2nd Ed., Society of Dyers and Colourists, Bradford, 1975, Chap. 3
  12. V. B. Gupta, A. K. Gupta, and V. V. P. Rajan, 'Dye Diffusion in Poly(ethylene terephthalate) Fibers', Text Res J, 1984, 54, 54-61 https://doi.org/10.1177/004051758405400112