Journal of Ocean Engineering and Technology (한국해양공학회지)

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지

Thermal Deformation of Curved Plates by Line Heating

선상가열법에 의한 곡판의 열변형

  • LEE JOO-SUNG (School of Marine Engineering, University of Ulsan) ;
  • LIM DONG-YONG (School of Marine Engineering, University of Ulsan)
  • 이주성 (울산대학교 조선해양공학부) ;
  • 임동용 (울산대학교 조선해양공학부)
  • Published : 2005.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

It has been well documented that plate forming is one of the most important processes in shipbuilding. In the most shipyards, the line heating method is primarily used for plate forming. Since the heating process is carried out for the curved plate and not for the flat plate, a curvature effect on the final deformation must be considered in deriving the simplified prediction models for deformation. This paper investigates the effect of curvature along the heating line on the deformation of the plate. First of all, results of numerical analysis are compared with these of a line-heating test, to justify the elasto-plastic analysis procedure for the present study, which shows good agreement. Then, the present numerical procedure is applied to flat and curved plate models, to investigate the curvature effect on the heat transfer characteristics and deformation by line heating.

Keywords

References

  1. 고대은, 장장두, 서승일, 이해우 (1999). '곡가공 자동화시스댐 을 위한 선상가열에 의한 변형의 실시간 시뮬레이션', 대한조선학회논문집, 제36권, 제4호, pp 116-127
  2. 김호경, 장창두 (2003). ,고주파 유도가열에 의한 선상가열 시뮬레이션' 한국해양공학회지, 제17권, 제1호, pp 80-85
  3. 이박인,류희승, 변구근, 김학곤 (2002). '열간가공에 의한 강판 의 곡가공 자동화 시스템' 대한조선학회논문집, 제139권, 제2 호, pp 34-43
  4. 이장현, 신종계. (2002) '유한요소해석과 디변수해석에 의한 선상가열 변형관계식' 대한조선학회논문집, 제39권, 제2호, pp 69-80
  5. 이주성 (2003). '강판의 곡가공 자동화를 위한 수치제어 시스템 의 개발'. 한국해양공학회지, 제17권, 제1호, pp 72-79
  6. Lee, J.S. (1996). 'Development of the Automatic Marking Generation System for the Plate Forming by Line Heating', Journal of Ship Production, SNAME, Vol 12, No 4, pp 247-253
  7. Moshaiov, A. and Latorre, R. (1985). 'Temperature Distribution During Plate Bending by Torch Flame Heating', Joumal of Ship Research, SNAME, Vol 29, No 1, pp 1-11
  8. Shin, J.G. and Moshaiov, A. (1991). 'Modified Strip Model for Analyzing the Line Heating Method', Journal of Ship Research, SNAME, Vol 35, No 2, pp 172-182
  9. Tsuji, I. and Okumura, Y. (1975). 'A Study on Litle Heating Process for Plate Bending of Ship Steels', Journal of Society of Naval Architecture of Seibu, Vol 76, pp 149-160
  10. Veda, Y, Murakawa, H., Rashwan, A.M., Ishiyama, M., Murakawa, H., and Ogawa, J. (1993). 'Development of Computer Aided Process Planing System for Plate Bending by Line Heating(4th Report)', Journal of the Society of Naval Architects of Japan, Vol 173, pp 683-695