Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지

Fault Detection Analysis by Using a Machinery Fault Simulator

기계 결함 시뮬레이터(MFS)를 이용한 결함 신호 분석

  • Bae Taehan (Department of Mechanical and Design, Gyeongsang National University) ;
  • Jang Sukdong (Department of Mechanical and Design, Gyeongsang National University) ;
  • Song Chul Ki (School of Mechanical and Aerospace Engineering, ReCAPT, Gyeongsang National University)
  • 배태한 (경상대학교 대학원 기계설계학과) ;
  • 장석동 (경상대학교 대학원 기계설계학과) ;
  • 송철기 (경상대학교 기계항공공학부)
  • Published : 2005.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents experimental results by using the machinery fault simulator which is monitoring its conditions with an acceleration signal. Components of the machinery, for example, motor, belt pulley, belt, bearing, and gear, with artificial defects were used for the experiment.

Keywords

References

  1. J. B. Chai, 'A Defect Diagnosis of Machinery Condition,' KSNVE, Vol.6, No.4, pp.387-393, 1996
  2. N. J. Nam and W. T. Kwon, 'Dectection Monitoring and Diagnosis for Machines,' KSPE, Vol.11, No.2, pp.5-6, 1994
  3. Y. S. Jung, J. N. Woang and K. S. Kim, 'Defect Identification through Frequency Analysis of Vibration -In Case of Rotary Machine,' KSPE, Vol.12, No.11, pp.82-90, 1995
  4. M. S. Park, 'Machinery Condition Monitoring Using Vibration Signals,' Thesis for Master's Degree, GSNU, 1997
  5. S. H. Jung and Y. P. Park, 'A Study on Fault Detection of Ball Bearing Using Vibration Signal,' KSME, Vol.9, No.12, pp.3260-3269, 1995
  6. J. H. Yoon, S. G. Kim, J. H. Kim, J. H. Yu and J. M. Lee, 'A Study on the Automatic Diagnosis System of Ball Bearings for Rotating Machinery,' KSME, Vol.16, No.8, pp.1787-1798, 1995
  7. B. S. Yang, W. K. Jang, D. S. Lim and H. J. Kim, 'Development of Vibration Diagnosis System for Rotating Machine,' KSNVE, Vol.6 No.3, pp.323-332, 1996
  8. J. E. Oh and J. C. Lee, 'A Study on the Fault Diagnosis of Diagnosis of Rotating Machinery Using Neural Network With Bispectrum,' Transactions of KSAE, Vol.3, No.6, pp.262-273, 1995
  9. Victor, Work, Machinery Vibration:Measurement and Analysis, McGraw-hill, Inc. pp.125-234, 1991
  10. B. H. Choi, Fault Detection of Bearings Using Signal Analysis, HRDKOREA, pp.79-89, 1992
  11. B. H. Choi, Machinery Diagnosis, HRD KOREA, pp.76-79, 1994
  12. User Operating Manual for Machinery Fault Simulator$^{TM}$ Ver.2.0, Spectra Quest Inc