참고문헌
- ASME Boiler and Pressure Vessel Code, Case 1934. Seamless Modified 9Cr-1Mo Section I
- ASTM A213-83
- Bursik, O., J., Kucharova, K and Sklenicka, V. (1998). Microstructural developent during high temperature creep of 9%Cr steel. Mater. Sci. Eng., A245, 39
- Cerri, E., Evangelista, E., Spigarelli, S. and Bianchi, P. (1998). Evolution of microstructure in a modified 9Cr1Mo steel during short term creep. Mater. Sci. Eng., A245,285
- Endo, T. and Shi, J. (1994). Strength of materials. Ed. by H. Oikawa, K. Maruyama, S. Takeuchi and M. Yamaguchi, JIM, 665
- Excell, S. F. and Warrington, D. H. (1972). Sub-grain boundary migration in aluminium. Phil. Mag. 26, 1121
- Fukutomi, H. and Horiuchi, R. (1979). Stress induced migration of <112> symmetric tilt boundaries. J. Japan Inst. Metals, 43, 1025 https://doi.org/10.2320/jinstmet1952.43.11_1025
- Fukutomi, H. and Horiuchi, R. (1981). Stress induced migration of <112> and <100> symmetric tilt boundaries. J. Japan Inst. Metals, 45, 574 https://doi.org/10.2320/jinstmet1952.45.6_574
- Hillert, M. (1965). On the theory of normal and abnormal grain growth. Acta Met., 13, 227 https://doi.org/10.1016/0001-6160(65)90200-2
- Kouon Henkei Tokusei Deta Shyu. (1992). ISH, Tokyo, 117
- Kushima, H., Kimura, K. and Abe, F. (1999). Degradation of Mod.9Cr-1Mo Steel during long-term creep deformation. Tetsu-to Hagane, 85, 841
- Masuyama, F. and Nishimura, N. (1994). Srength of Materials. Ed. by H. Oikawa, K. Maruyama, S. Takeuchi and M. Yamaguchi. JIM, 657
- Nishizawa, T., Ohmura, I. and Ishida, K. (1977). Examination of the Zener relationship between grain size and particle dispersion. Mater. Trans. JIM, 38, 950
- Park, K. S., Masuyama, F. amd Endo, T. (2001). Creep modeling for life evaluation of heat-resistant steel with a martensitic structure. ISIJ International, 41, S 86-90 https://doi.org/10.2355/isijinternational.41.86
- Park, K. S., Masuyama, F. and Endo, T. (1998). Shortterm creep behavior analysis of a Mod.9Cr-IMo steel. Tetsu-to Hagane, 84, 526-533 https://doi.org/10.2355/tetsutohagane1955.84.7_526
- Park, K. S., Masuyama, F. and Endo, T. (1999). Constitutive equation describing creep curve of a statically aged Mod.9Cr-IMo steel. J. Japan Inst. Metals, 63, 597 https://doi.org/10.2320/jinstmet1952.63.5_597
-
Park, K. S., Masuyama, F. and Endo, T. (1999). Improvement of
$\Omega$ method to estimate creep behavior of a Mod.9Cr-lMo steel. Tetsu-to Hagane, 85,492 - Prager, M. (1994). Strength of materials. Ed. by H. Oikawa, K. Maruyama, S. Takeuchi and M. Yamaguchi, JIM,571
- Read, W. T., Jr. (1953). Dislocations in Crystls. McGrawHill. New York. 155
- Sandstrom, R. and Konyr, A. (1972). Modelfor Tertiarycreep in Mo-and CrMo-Steels. ICM3. Cambridge. UK. 2.275
- Sawada, K., Maruyama, K., Hasegawa, Y. and Muraki, T. (1999). Creep and Fracture of Engineering Materials and Structures. Ed. by T. Sakuma, K. Yagi, Trans Tech Publications. Swiss. 109-114
- Sawada, K., Maruyama, K., Komine, R. and Nagae, Y. (1997). Microstructural changes during creep and life assessment of Mod.9Cr-1Mo steel. Tetsu-to-Hagane, 83,466-471 https://doi.org/10.2355/tetsutohagane1955.83.7_466
- Sawada, K., Takeda, M., Maruyama, K., Komine, R. and Nagae, Y. (1998). Residual creep life assessment by change of martensitic lath structure in modified 9Cr-1Mo steels. Tetsu-to-Hagane, 84, 580 https://doi.org/10.2355/tetsutohagane1955.84.8_580
- Suzuki, K., Kumai, S., Kushima, H., Kimura, K. and Abe, F. (2000). Heterogeneous recovery and precipitation of Z phase during long term creep deformation of modified 9Cr-1Mo steel. Tetsu-to Hagane, 86, 550