초록
일체형 코드에서는 접촉 불량, 기계적 충격 등의 부주의한 사용에 의해 전기화재가 자주발생하고 있다. 본 논문에서는 비닐코드 및 고무코드 등의 일체형 코드의 화재확산 패턴을 조사하기 위해 벽면모델을 모의하였다. 화재진행과 확산패턴은 고속카메라를 이용하여 측정하였다. 실험결과로부터, 일체형 코드의 화재패턴은 섬광, 비산 그리고 완전이탈 순으로 진행하였다. 외부화염에 의해 비닐코드가 고무코드보다 단락이 쉽게 발생하였다. 일체형 코드가 완전 이탈이 된 경우, 비닐코드는 착화에너지가 감소함에 따라 더 이상의 화재 진전은 이루어지지 않았지만, 고무코드는 연속적으로 화재가 진행하는 것을 알 수 있었다.
The electrical fire frequently happens through careless use such as poor contact, mechanical stress on power cord sets. In this paper, we simulated a wall-model in order to investigate the patterns of fire dispersion on power cord sets which consists of vinyl cord and rubber cord, etc. The fire progress and dispersive patterns were measured by a high speed imaging system(HG-100K, REDLAKE, USA). From the results, the fire pattern of power cord sets was progressed in order of flashover, scattering and disconnection. The short-circuit of the vinyl cords happened easier than the rubber cords by the external flame. In case vinyl cord is disconnected. the fire progress is not observed because the ignition energy decreases. Whereas, the fire progressed continuously in case of the rubber cord.