DOI QR코드

DOI QR Code

Ductility enhancement of reinforced concrete thin walls

  • 투고 : 2004.10.01
  • 심사 : 2005.03.09
  • 발행 : 2005.04.25

초록

The ductility of reinforced concrete bearing walls subjected to high axial loading and moment can be enhanced by improving the deformability of the compression zone or by reducing the neutral axis depth. The current state-of-the-art procedure evaluating the confinement effect prompts a consideration of the spaces between the transverse and longitudinal reinforcing bars, and a provision of tie bars. At the same time, consideration must also be given to the thickness of the walls. However, such considerations indicate that the confinement effect cannot be expected with the current practice of detailing wall ends in Korea. As an alternative, a comprehensive method for dimensioning boundary elements is proposed so that the entire section of a boundary element can stay within the compression zone when the full flexural strength of the wall is developed. In this comprehensive method, the once predominant code approach for determining the compression zone has been advanced by considering the rectangular stress block parameters varying with the extreme compression fiber strain. Moreover, the size of boundary elements can also be determined in relation to the architectural requirement.

키워드

과제정보

연구 과제 주관 기관 : Korea Science Foundation

참고문헌

  1. ACI 318 (2002), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Michigan, U.S.A.
  2. Cardenas, A. E., Hanson, J. M., Corley, W. G. and Hognestad, E. (1973), "Design provisions for shear walls', ACI J., 70-23, March, 221-230.
  3. Chang, G. A. and Mander, J. B. (1994), "Seismic energy based fatigue damage analysis of bridge columns, Part I: Evaluation of seismic capacity", Technical Report NCEER-94-0006, National Center for Earthquake Engineering Research, State University of New York at Buffalo, New York, U.S.A.
  4. FEMA 273 (1997), NEHRP Guidelines for the Seismic Rehabilitation of Buildings, Building Seismic Safety Council.
  5. Fischinger, M., Isakovic, T. and Kante, P. (2004), "Implementation of a macro model to predict seismic response of RC structural walls", Comput. and Concrete, An. Int. J., 1(2), 211-226. https://doi.org/10.12989/cac.2004.1.2.211
  6. KCI-AIK (1999), Reinforced Concrete Structural Design Standards, Korea Concrete Institute and Architectural Institute of Korea, in Korean.
  7. Kwak, H. G. and Kim, D. Y. (2004), "Cracking behavior of RC shear walls subjected to cyclic loading", Comput. and Concrete, An. Int. J., 1(1), 77-98. https://doi.org/10.1296/CAC2004.01.01.06
  8. Mander, J. B., Priestley, M. J. N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., ASCE, 114(8), August, 1804-1825. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  9. Mander, J. B., Dutta, A. and Goel, P. (1998), "Capacity design of bridge piers and the analysis of overstrength", Technical Report MCEER-98-0003, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, New York, U.S.A.
  10. Paulay, T. and Priestley, M. J. N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, Wiley.
  11. Sittipunt, C. and Wood, S.L. (2000), "Development of reinforcement details to improve the cyclic response of slender structural walls", Proceedings of 12th World Conference of Earthquake Engineering, Paper id. 1770, Auckland, New Zealand.
  12. Wallace, J. W. (1994), "New methodology for seismic design of RC shear walls", J. Struct. Eng., ASCE, 120(3), March, 863-884. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:3(863)
  13. Wallace, J. W. (1995), "Seismic design of RC structural walls, Part I: New Code Format", J. Struct. Eng., ASCE, 121(1).

피인용 문헌

  1. Maximum axial load level and minimum confinement for limited ductility design of high-strength concrete columns vol.6, pp.5, 2005, https://doi.org/10.12989/cac.2009.6.5.357
  2. Maximum concrete stress developed in unconfined flexural RC members vol.8, pp.2, 2005, https://doi.org/10.12989/cac.2011.8.2.207