DOI QR코드

DOI QR Code

Tensile response of steel/CFRP adhesive bonds for the rehabilitation of civil structures

  • Matta, F. (Department of Structural & Transportation Engineering, University of Padua) ;
  • Karbhari, Vistasp M. (Department of Structural Engineering, University of California San Diego) ;
  • Vitaliani, Renato (Department of Structural & Transportation Engineering, University of Padua)
  • 투고 : 2004.08.26
  • 심사 : 2005.04.19
  • 발행 : 2005.07.30

초록

There is a growing need for the development and implementation of new methods for the rapid and cost-effective rehabilitation of deteriorating steel structural components to offset the drawbacks related to welding and/or bolting in the field. Carbon fiber reinforced polymer (CFRP) composites provide a potential alternative as externally bonded patches for strengthening and repair of metallic structural members for building and bridge systems. This paper describes results of an investigation of tensile and fatigue response of steel/CFRP joints simulating scenarios of strengthening and crack-patching. It is shown that appropriately designed schemes, even when fabricated with levels of inaccuracy as could be expected in the field, can provide significant strain relief and load transfer capability. A simplified elasto-plastic closed form solution for stress analysis is presented, and validated experimentally. It is shown that the bond development length remains constant in the linear range, whereas it increases as the adhesive is deformed plastically. Fatigue resistance is shown to be at least comparable with the requirements for welded cover plates without attendant decreases in stiffness and strength.

키워드

참고문헌

  1. Albat, A.M. and Romilly, D.P. (1999), 'A direct linear-elastic analysis of double symmetric bonded joints and reinforcements', Composites Science and Technology, 59(7), 1127-1137 https://doi.org/10.1016/S0266-3538(98)00149-3
  2. Albrecht, P. and Hall, T.T. (2003), 'Atmospheric corrosion resistance of structural steels', ASCE J. Mater. Civil Eng., 15(1), 2-24 https://doi.org/10.1061/(ASCE)0899-1561(2003)15:1(2)
  3. Albrecht, P. and Sahli, A.H. (1988), 'Static strength of bolted and adhesively bonded joints for steel structures', ASTM STP 981, Adhesively Bonded Joints: Testing, Analysis and Design. Ed. W.S. Johnson, 229-251
  4. American Association of State Highway and Transportation Officials (1998), 'Load and resistance factor design (LRFD) bridge design specifications', 2nd edition
  5. Baker, A.A. and Jones, R. (1988), Bonded Repairs of Aircraft Structures, Martinus Nijhoff
  6. Bassetti, A., Nussbaumer, A. and Hirt, M.A. (2000), 'Fatigue life extension of riveted bridge members using prestressed carbon fiber composites', Proc. of the Int. Conf. on Steel Structures of the 2000's, Istanbul, Turkey, September 11-13, 2000, 375-380
  7. Bourban, P.E., McKnight, S.H., Shulley, S.B., Karbhari, V.M. and Gillespie, J.W. Jr. (1994), 'Durability of steel! composite bonds for rehabilitation of structural components', Proc. of the 3rd ASCE Materials Engineering Conf., San Diego, CA, 295-302
  8. Colombi, P., Bassetti, A. and Nussbaumer, A. (2003), 'Analysis of cracked steel members reinforced by prestress composite patch', Fatigue and Fracture of Engineering Materials and Structures, 26(1), 59-66 https://doi.org/10.1046/j.1460-2695.2003.00598.x
  9. Dunker, K.F., Klaiber, F.W. and Sanders, W.W., Jr. (1987), 'Bridge strengthening needs in the United States', Transportation Research Record 1118, Transportation Research Board, Washington, D.C., 1-8
  10. European Committee for Standardization (1992), 'ENV 1993-1-1, Eurocode 3- Design of Steel Structures: Part 1-1: General Rules and Rules for Buildings'
  11. Fisher, J.W. (1984), Fatigue and Fracture in Steel Bridges: Case Studies, John Wiley and Sons
  12. FRP Composites: Life Extension and Strengthening of Metallic Structures (2001), ed. by S.S.J. Moy, Institution of Civil Engineers Design and Practice Guide, Thomas Telford, London
  13. Grabovac, I. (2003), 'Bonded composite solution to ship reinforcement', Composites A, 34, 847-854 https://doi.org/10.1016/S1359-835X(03)00179-9
  14. Hart-Smith, L.J. (1973), 'Adhesive-bonded double lap joints', NASA-CR-112235
  15. Hart-Smith, L.J. (2002), 'Recent expansions in the capabilities of Rose's closed-form analyses for bonded crack patching', in Advances in the Bonded Composite Repair of Metallic Aircraft Structure, eds. A.A. Baker, L.R.F. Rose and R. Jones, Elsevier, 177-206
  16. Hollaway, L.C. and Cadei, J. (2002), 'Progress in the technique of upgrading metallic structures with advanced polymer composites', Progress in Structural Engineering and Materials, 4(2), 131-148 https://doi.org/10.1002/pse.112
  17. Jones, S.C. and Civjan, S.A. (2003), 'Application of fiber reinforced polymer overlays to extend to steel fatigue life', J. Composites for Construction, ASCE, 7(4), 331-338 https://doi.org/10.1061/(ASCE)1090-0268(2003)7:4(331)
  18. Karbhari, V.M. and Shulley, S.B. (1995), 'Use of composites for rehabilitation of steel structures - determination of bond durability,' J. Mater. Civil Eng., ASCE, 7(4), 239-245 https://doi.org/10.1061/(ASCE)0899-1561(1995)7:4(239)
  19. McKnight, S.H., Bourban, P.E., Gillespie, J.W. Jr. and Karbhari, V.M. (1994), 'Surface preparation of steel for adhesive bonding in rehabilitation applications', Proc. of the 1994 ASCE Materials Engineering Conf., San Diego, CA, 1148-1155
  20. Moy, S.S.J. (2002), 'Early age curing under cyclic loading - An investigation into stiffuess development in carbon fibre reinforced steel beams,' Proc. of the Int. Conf. on Advanced Polymer Composites in Construction, Southampton, UK, April 15-17, pp.8
  21. Moy, S.S.J., Barnes, F., Moriarty, J., Dier, A.F., Kenchington, A and Iverson, B. (2000), 'Structural upgrade and life extension of cast iron struts using carbon fiber reinforced composites', Proc. of the 8th Int. Conf. on Fibre Reinforced Composites, Newcastle upon Tyne, UK, September 13-15, 3-10
  22. Nara, H., Gasparini, D.A., Andreani, J. and Boggs, C. (1985), 'Steel to steel bonding for bridges', Proc. of the 30th Int. SAMPE Symposium and Exhibition, Anaheim, CA March 19-21, 1387-1396
  23. National Bridge Inventory (2002), 'United States NBI Report 2002', http://www.nationalbridgeinventory.com/nbi_report_2002.htm
  24. Nishikawa, K., Murakoshi, J. and Matsoukis, T. (1998), 'Study on the fatigue strength of steel highway bridges in Japan', Construction and Building Materials, 12(2-3), 133-141 https://doi.org/10.1016/S0950-0618(97)00015-9
  25. Poole, P. (2002), 'Graphite/Epoxy patching efficiency studies', in Advances in the Bonded Composite Repair of Metallic Aircraft Structures, eds., A.A. Baker, L.R.F. Rose, and R. Jones, Elsevier, 415-441
  26. Sen, R. and Liby, L. (1994), 'Repair of steel composite sections using CRFP laminates', Final report submitted to the Florida Department of Transportation, University of South Florida
  27. Shulley, S.B. (1994), 'Application of composites to the rehabilitation of steel infrastructure', B.S. Thesis, University of Delaware, pp.60
  28. Shulley, S.B., Huang, X., Karbhari, V.M. and Gillespie, J.W. Jr. (1994) 'Fundamental considerations of design and durability in composite rehabilitation schemes for steel girders with web distress', Proc. of the 1994 ASCE Materials Engineering Conf., San Diego, CA, 1187-1194
  29. Tavakkolidazeh, M. and Saadatmanesh, H. (2003a), 'Fatigue strength of steel girders strengthened with carbon fiber reinforced polymer patch', J. Struct. Eng., ASCE, 129(2), 186-196 https://doi.org/10.1061/(ASCE)0733-9445(2003)129:2(186)
  30. Tavakkolidazeh, M. and Saadatmanesh, H. (2003b), 'Strengthening of steel-concrete composite girders using carbon fiber-reinforced polymer sheets', J. Struct. Eng., ASCE, 129(1), 30-40 https://doi.org/10.1061/(ASCE)0733-9445(2003)129:1(30)
  31. Tavakkolidazeh, M. and Saadatmanesh, H. (2003c), 'Repair of damaged steel-concrete composite girders using carbon fiber-reinforced polymer sheets', J. Composites for Construction, ASCE, 7(4), 311-322 https://doi.org/10.1061/(ASCE)1090-0268(2003)7:4(311)
  32. Wang, C.H. and Rose, L.R.F. (1997), 'Determination of triaxial stresses in bonded joints', Int. J. of Adhesion and Adhesives, 17(1), 17-25 https://doi.org/10.1016/S0143-7496(96)00028-0

피인용 문헌

  1. Modified force method for the nonlinear analysis of FRP reinforced concrete beams vol.131, 2015, https://doi.org/10.1016/j.compstruct.2015.05.075
  2. Application of fracture mechanics to predict the failure load of adhesive joints used to bond CFRP laminates to steel members vol.27, pp.1, 2012, https://doi.org/10.1016/j.conbuildmat.2011.07.040
  3. Acoustic Emission Damage Assessment of Steel/CFRP Bonds for Rehabilitation vol.10, pp.3, 2006, https://doi.org/10.1061/(ASCE)1090-0268(2006)10:3(265)
  4. Prediction of debonding strength of tensile steel/CFRP joints using fracture mechanics and stress based criteria vol.76, pp.2, 2009, https://doi.org/10.1016/j.engfracmech.2008.10.005
  5. Fatigue performance of tensile steel members strengthened with CFRP plates vol.87, pp.4, 2009, https://doi.org/10.1016/j.compstruct.2008.02.004
  6. Strain fields in adhesively bonded patch repairs of damaged Metallic beams vol.48, 2015, https://doi.org/10.1016/j.polymertesting.2015.09.013
  7. Bond behaviour between CFRP laminates and steel members under different loading rates vol.148, 2016, https://doi.org/10.1016/j.compstruct.2016.04.002
  8. Recycled Aggregate Concrete in FRP-confined columns: A review of experimental results vol.174, 2017, https://doi.org/10.1016/j.compstruct.2017.04.034
  9. Fatigue behaviour of tensile steel/CFRP joints vol.94, pp.8, 2012, https://doi.org/10.1016/j.compstruct.2012.03.001
  10. Elasto-plastic debonding strength of tensile steel/CFRP joints vol.85, 2012, https://doi.org/10.1016/j.engfracmech.2012.02.008
  11. Reinforcement delamination of metallic beams strengthened by FRP strips: Fracture mechanics based approach vol.73, pp.14, 2006, https://doi.org/10.1016/j.engfracmech.2006.03.011
  12. Effect of fatigue loading on the bond behaviour between UHM CFRP plates and steel plates vol.50, 2013, https://doi.org/10.1016/j.compositesb.2013.02.040
  13. Experimental Study on Interfacial Bond Behavior between CFRP Sheets and Steel Plates under Fatigue Loading vol.12, pp.3, 2019, https://doi.org/10.3390/ma12030377
  14. Experimental study on repair of corroded steel beam using CFRP vol.9, pp.2, 2005, https://doi.org/10.12989/scs.2009.9.2.103
  15. Debonding failure analysis of FRP-retrofitted concrete panel under blast loading vol.38, pp.4, 2005, https://doi.org/10.12989/sem.2011.38.4.479
  16. Strengthening of Laterally Restrained Steel Beams Subjected to Flexural Loading Using Low-Modulus CFRP vol.33, pp.3, 2019, https://doi.org/10.1061/(asce)cf.1943-5509.0001293
  17. Experimental Study on CFRP-to-Steel Bonded Interfaces under Quasi-Static Cyclic Loading vol.23, pp.4, 2019, https://doi.org/10.1061/(asce)cc.1943-5614.0000945
  18. Bond Behavior of CFRP-to-Steel Bonded Joints at Mild Temperatures: Experimental Study vol.24, pp.6, 2005, https://doi.org/10.1061/(asce)cc.1943-5614.0001073