DOI QR코드

DOI QR Code

Statistical models from weigh-in-motion data

  • Chan, Tommy H.T. (Department of Civil and Structural Engineering, The Hong Kong Polytechnic University) ;
  • Miao, T.J. (Department of Civil and Structural Engineering, The Hong Kong Polytechnic University) ;
  • Ashebo, Demeke B. (Department of Civil and Structural Engineering, The Hong Kong Polytechnic University)
  • 투고 : 2004.07.30
  • 심사 : 2005.03.02
  • 발행 : 2005.05.10

초록

This paper aims at formulating various statistical models for the study of a ten year Weigh-in-Motion (WIM) data collected from various WIM stations in Hong Kong. In order to study the bridge live load model it is important to determine the mathematical distributions of different load affecting parameters such as gross vehicle weights, axle weights, axle spacings, average daily number of trucks etc. Each of the above parameters is analyzed by various stochastic processes in order to obtain the mathematical distributions and the Maximum Likelihood Estimation (MLE) method is adopted to calculate the statistical parameters, expected values and standard deviations from the given samples of data. The Kolmogorov-Smirnov (K-S) method of approach is used to check the suitability of the statistical model selected for the particular parameter and the Monte Carlo method is used to simulate the distributions of maximum value stochastic processes of a series of given stochastic processes. Using the statistical analysis approach the maximum value of gross vehicle weight and axle weight in bridge design life has been determined and the distribution functions of these parameters are obtained under both free-flowing traffic and dense traffic status. The maximum value of bending moments and shears for wide range of simple spans are obtained by extrapolation. It has been observed that the obtained maximum values of the gross vehicle weight and axle weight from this study are very close to their legal limitations of Hong Kong which are 42 tonnes for gross weight and 10 tonnes for axle weight.

키워드

참고문헌

  1. Ang, A.H.S. and Tang, W.H. (1984), Probabilistic Concepts in Engineering Planning and Design, Vol. 2, John Wiley & Sons, New York
  2. Benjamin, J.R. and Cornell, C.A. (1970), Probability, Statistics, and Decision for Civil Engineers, McGraw-Hill Book Company, USA
  3. Hahn, J. and Samuel. (1994), Statistical Models in Engineering, New York, John Wiley
  4. Harman, D.J. and Davenport, A.G. (1976), The Formulation of Vehicular Loading for the Design of Highway Bridges in Ontario, Ontario joint transportation and communications research program
  5. Heywood, R.J. (1992), 'A multiple presence load model for bridges', Proc. of ASCE Conf. on Probabilistic Mechanics and Structural and Geotechnical Reliability, Denver, Colorado
  6. Heywood, R.J. (1992), 'Bridge live load models from weigh-in-motion data', Ph.D. Thesis, University of Queensland, Australia
  7. Illinois (1999), Programming with SPSS Syntax and Macros (v10.0 Revised), SPSS Inc., Chicago
  8. Kottegoda and Rosso (1998), Statistics, Probability, and Reliability for Civil and Environmental Engineers, McGraw-Hill International Editions, Singapore
  9. Lin, Z.M. (1990), The Reliability Design and Estimation of Structural Engineering (in Chinese)
  10. Miao, T.J. (2001), 'Bridge live load models with the special reference to Hong Kong', Ph.D thesis, the Hong Kong Polytechnic University
  11. Miao, T.J. and Chan, T.H.T (2002), 'Bridge live load models from WIM data', Eng. Struct., 24, 1071-1084 https://doi.org/10.1016/S0141-0296(02)00034-2
  12. Norman, L.J. (1994), Continuous Univariate Distributions, New York, Wiley & Sons
  13. Nowak, A.S. (1991), 'Proposed LRFD bridge design code', Austroads Conference, Brisbane
  14. Nowak, A.S. (1994), 'Load model for bridge design code', Canadian Journal of Civil Engineering, 21, 36-49 https://doi.org/10.1139/l94-004
  15. Nowak, A.S. and Collins, K.R. (2000), Reliability of Structures, McGraw Hill, New York
  16. Rohatgi, V.K. (1976), An Instruction to Probability Theory and Mathematical Statistics
  17. Seshadri, (1993), The Inverse Gaussian Distribution: A Case Study in Exponential Families, Oxford, Clarendon Press.
  18. Tweedie, M.C.K. (1957), 'Statistical properties of inverse Gaussian distributions, I', Annals of Mathematical Statistics, 28, 362-337 https://doi.org/10.1214/aoms/1177706964
  19. Tweedie, M.C.K. (1957), 'Statistical properties of inverse Gaussian distributions, II, Annals of Mathematical Statistics, 28, 696-705 https://doi.org/10.1214/aoms/1177706881

피인용 문헌

  1. Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads vol.2015, 2015, https://doi.org/10.1155/2015/659092
  2. Statistical analysis and probabilistic modeling of WIM monitoring data of an instrumented arch bridge vol.17, pp.6, 2016, https://doi.org/10.12989/sss.2016.17.6.1087
  3. Enhancement of bridge live loads based on West Virginia weigh-in-motion data vol.4, pp.3-4, 2008, https://doi.org/10.1080/15732480802642501
  4. Extrapolation of extreme traffic load effects on bridges based on long-term SHM data vol.17, pp.6, 2016, https://doi.org/10.12989/sss.2016.17.6.995
  5. Evaluation of a current vehicle load model using weigh-in-motion records: a case in China vol.11, pp.3, 2016, https://doi.org/10.3846/bjrbe.2016.23
  6. Measurement-Based Vehicle Load Model for Urban Expressway Bridges vol.2014, 2014, https://doi.org/10.1155/2014/340896
  7. Estimation of Dynamic Traffic Densities for Official Statistics vol.2256, pp.1, 2011, https://doi.org/10.3141/2256-13
  8. Multi-parameter Dynamic Traffic Flow Simulation and Vehicle Load Effect Analysis based on Probability and Random Theory vol.23, pp.8, 2005, https://doi.org/10.1007/s12205-019-2121-8
  9. Modelling the spatial distribution of heavy vehicle loads on long-span bridges based on undirected graphical model vol.15, pp.11, 2005, https://doi.org/10.1080/15732479.2019.1639774
  10. Reliability assessment of existing RC bridges with spatially-variable pitting corrosion subjected to increasing traffic demand vol.218, pp.no.pa, 2005, https://doi.org/10.1016/j.ress.2021.108137