References
- E.W. Klechka, Mater, Perform., 41, 24 (2002)
- T.R. Jack and M.J. Wilmott, Mater. Perform., 35, 18 (1996)
- A. Sander, B. Berghult, A.E. Broo, E.L. Johansson, and T. Hedberg, Carras. Sci., 38, 443 (1996)
- A. Sander, B. Berghult, E. Ahlberg, A.E. Broo, E.L. Johansson, and T. Hedberg, Carras. Sci., 39, 77 (1997)
- M.R. Schock, Water Quality and Treatment - A Handbook of Community Water Supplies, 4th ed., p.997, AWWA, McGraw-Hill, 1990
- A.W. Peabody, Control of Pipeline Corrosion, 2nd Ed., p.5, NACE, Houston, TX, 1967
- M.G. Fontana, Corrosion Engineering, 3rd Ed., p.383, McGraw-Hill, New York, NY, 1986
- V.S. Agarwala and S. Ahmad, 'Corrosion Monitoring and Monitoring - A Review,' CORROSION/2000, Paper No. 271, NACE, Houston, TX (2000)
- Y. Miyata and S. Asakura, Japan. Soc. Carr. Eng., 46, 541 (1997)
- D.L. Piron, R. Desjardins, F. Briere, and M. Ismael, 'Corrosion Rate of Cast Iron and Copper Pipe by Drinkable Water,' in Corrosion Monitoring in Industrial Plants Using Nondestructive Testing and Electrochemical Methods, ASTM STP 908, p.358, ASTM, Philadelphia, PA, (1986)
- B. Elsener, M. Molina, and H. Bonhi, Carras. Sci., 35, 1563 (1993)
- N.S. Berke, D.F. Shen, and K.M. Sundberg, 'Comparison of Current Interruption and Electrochemical Impedance Techniques in the Determination of the Corrosion Rates of Steel in Concrete,' ASTM Sym. Ohmic Electrolyte Resistance Measurement and Compensation, ASTM, West Conshohocken, PA (1988)
- P.A. Cella and S.R. Taylor, Corrosion, 56, 951 (2000)
- NACE Publication IC187, Use of Galvanic Probe Corrosion Monitors in Oil and Gas Drilling and Production Operations, NACE, Houston, TX (1995)
- V.S. Agarwala, In-Situ Corrosivity Monitoring of Military Hardware Environments, CORROSION/96, Paper No.632, NACE, Houston, TX (1996)
- M.D. Jaeger, B.R. Pilvelait, and P.J. Magari, Multilayer Galvanic Cell for Next Generation Corrosion Sensors, CORROSION/2000, Paper No. 302, NACE, Houston, TX (2000)
- J. Gulikers, Construction and Building Materials, 11, 143 (1997)
- M. Raupach and P. Schiessl, Construction and Building Materials, 11, 207 (1997)
- M. Raupach and P. Schiessl, NDT&E International, 34, 435 (2001) https://doi.org/10.1016/S0963-8695(00)00024-4
- J.P. Broomfield, K. Davies, and K. Hladky, Cement & Concrete Composites, 24, 27 (2002)
- T. J. Garosshen and T. K. Mukherji, On the Correlation of Bimetallic Corrosion Sensor Output to Actual Corrosion Damage, CORROSION/2000, Paper No. 266, NACE, Houston, TX (2000)
- J.G. Kim, Y.W. Kim, and M.C. Kang, Corrosion, 58, 175 (2002)
- lG. Kim and Y.W. Kim, Carras. Sci., 43, 2011 (2001) https://doi.org/10.1016/S0010-938X(00)00071-8
- S.W. Dean, Handbook on Corrosion Testing and Evaluation, John Wiley, New York, NY, p.171 (1971)
- G.O. Davis, J. Kolts, and N. Sridhar, Corrosion, 42, 329 (1986)
- H.H. Uhlig, and R.W. Revie, Corrosion and Corrosion Control, 3rd Ed., p.29, John Wiley & Sons, New York, NY, 1985
- D.A. Jones, Principles and Prevention of Corrosion, 2nd Ed., p.168, Prentice-Hall, Upper Saddle River, NJ, 1996
- F. Mansfield and lV. Kenkel, 'Laboratory Studies of Galvanic Corrosion of Aluminum Alloys,' in Galvanic and Pitting Corrosion- Field and Laboratory Studies, ASTM STP 576, p.20, ASTM, Philadelphia, PA1976
- J. C. Oung and H. C. Shih, Corrosion Prevention & Control, December, 173 (1997)
- Y.S. Choi and J.G. Kim, Corrosion, 56, 1202 (2000)