References
- Keenan, J. H., Neumann, E. P. and Lustwerk, F., 1950, 'An Investigation of Ejector Design by Analysis and Experiment,' Journal of Applied Mechanics, Vol. 17, No. 3, pp. 299-309
- Alperin, M. and Wu, J. J., 1983, 'Thrust Augmenting Ejector, Part 2,' AIAA Journal, Vol. 21, No. 12, pp. 1698-1706 https://doi.org/10.2514/3.8312
- Yang, T. T., Ntone, F., Jiang, T. and Pitts, D. R., 1985, 'An Investigation of High Performance, Short Thrust Augmenting Ejectors,' Jour. Fluids Eng., Vol. 107, pp. 23-30 https://doi.org/10.1115/1.3242435
- Binder, G. and Didelle, H., 1975, 'Improvement of Ejector Thrust Augmentation by Pulsating or Flapping Jets,' 2nd Symposium on Jet Pumps & Ejectors and Gas Lift Techniques, Paper E2, pp. 15-26
- Barankiewics, W. W., Perusek, G. P. and Ibrahim, M. B., 1994, 'Approximate Similarity Principle for a Full-Scale STOVL Ejector,' Journal of Propulsion and Power, Vol. 10, No. 2, pp. 198-203 https://doi.org/10.2514/3.23730
- Quinn, B., 1976, 'Ejector Performance at High Temperatures and Pressures,' Journal Aircraft, Vol. 13, No. 12, pp. 948-954 https://doi.org/10.2514/3.44561
- Francis, W. E., Hoggarth, M. L. and Templeman, J. J., 1972, 'The Design of Jet Pumps and Injectors for Gas Distribution and Combustion Purposes,' Symposium on Jet Pumps and Ejectors, BHRA Fluid Engineering-Institution of Chemical Engineers, London, England, No. 6, pp. 81-96
- Lim, J. W. and Lee, S. H., 2000, 'Engine Room Cooling System Using Jet Pump,' Proceedings of the KSME 2000 Spring Annual Meeting B, pp. 162-167
- Dutton, J. C. and Carroll, B. F., 1983, 'Optimized Ejector-Diffuser Design Procedure for Natural Gas Vapor Recovery,' Trans. of ASME, Journal of Energy Resources Technology, Vol. 105, pp. 388-393 https://doi.org/10.1115/1.3230934
- Nagahiro, J., Iwamote, J. and Higuchi, K., 1992, 'Experiments for Fine Air Bubble Production in Liquids Using Ejectors,' Trans. American Society of Agricultural Engineers, Vol. 35, No. 5, pp. 1581-1590 https://doi.org/10.13031/2013.28771
- Aiken, T. N., 1973, 'Aerodynamics and Noise Measurements on a Quasi-Two-Dimensional Augmenter Wing Model with Lose-Type Nozzles,' NASA TMX-62237, Sept.
- Quinn, B., 1977, 'Interaction between Screech Tones and Ejector Performance,' J. Aircraft, Vol. 14, No. 5, pp. 467-473 https://doi.org/10.2514/3.58804
- Viets, H., Campbell, J. R. and Korkan, K. D., 1981, 'Acoustic Interactions in Ejectors,' AIAA Paper 81-2045, Oct.
- Larminie, J. and Dicks, A., 2000, 'Fuel Cell Systems Explained,' John Wiley & Sons, Ltd., Chichester, pp. 246-247
- Choi, B. G., Lee, Y. K., Kim, H. D. and Kim, D. J., 2000, 'Computations of the Supersonic Ejector Flows with the Second Throat,' Trans. of the KSME B., Vol. 24, No. 8, pp. 1128-1138
- Choi, B. G., Kwon, O. S. and Kim, H. D., 2002, 'An Experimental Study of Sonic/Supersonic Ejector Flows,' Trans. of the KSME B, Vol. 26, No. 5, pp. 640-647 https://doi.org/10.3795/KSME-B.2002.26.5.640
- Oosthuizen, P. H. and Carscallen, W. E., 1997, 'Compressible Fluid FLow,' McGraw-Hill Book Co., pp. 192-195
- Kim, H. D., 1998, 'Reduction of Normal Shock-Wave Oscillations by Turbulent Boundary Layer Flow Suction,' Trans. of the KSME B, Vol. 22, No. 9, pp. 1229-1237