DOI QR코드

DOI QR Code

Thermal Stability of Al-Fe-X Alloy System Prepared by Mechanical Alloying and Spark Plasma Sintering: I. Al-Fe

기계적 합금화 및 스파크 플라즈마 소결에 의해 제조된 Al-Fe-X계 합금의 열적 안정성: I. Al-Fe

  • Lee, Hyun-Kwuon (School of Advanced Materials and System Engineering, Kumoh National Institute of Technology) ;
  • Lee, Sang-Woo (School of Advanced Materials and System Engineering, Kumoh National Institute of Technology) ;
  • Cho, Kyeong-Sik (School of Advanced Materials and System Engineering, Kumoh National Institute of Technology)
  • 이현권 (금오공과대학교 신소재시스템공학부) ;
  • 이상우 (금오공과대학교 신소재시스템공학부) ;
  • 조경식 (금오공과대학교 신소재시스템공학부)
  • Published : 2005.02.01

Abstract

Mechanical alloying using high-energy ball mill and subsequent spark plasma sintering (SPS) process was applied to understand mechanical alloying processing of Al-Fe alloy system. The thermal stability of mechanically alloyed Al-Fe alloy was intended to be enhanced by SPS process. Various analytical techniques including particle size analysis, density measurement, micro-Vickers hardness test, SEM, TEM, and X-ray diffractometry were adopted to find optimum processing conditions for mechanical alloying and subsequent SPS and to estimate thermal stability of the prepared alloy. It was found from the treatment of mechanically alloyed Al-8wt.%Fe powder mixture that needle-shaped $Al_3Fe$ precipitates was formed in the Al-Fe matrix, and the alloy compact showed enhanced densification and reached its full density with little loss of its fine microstructure. After heat treatment at $500^{\circC}$, it was also shown that the thermal stability of Al-8wt.%Fe alloy fabricated in the present study was enhanced, which was due to its fine microstructure developed by fast densification of SPS.

Keywords

References

  1. Y. He, S. J. Poon and G. J. Shiflet: Science, 241 (1988) 1661 https://doi.org/10.1126/science.2458626
  2. F. H. Froes: Metal Powder Reports, 1 (1989) 59
  3. F. H. Froes: Metal Powder Reports, 5 (1998) 342
  4. J. S. Benjamin and T. E. Volin: Metall. Trans., 5 (1974) 1929 https://doi.org/10.1007/BF02644161
  5. C. Suryanarayana, E. Ivanov and V. V. Boldyrev: Mater. Sci. Eng., A304 (2001) 151
  6. K. F. Kobaysshi: J. Mater. Sci., 25 (1990) 3149 https://doi.org/10.1007/BF00587665
  7. M. A. Morris and D. G. Morris: Mater. Sci. Eng., A136 (1991) 59 https://doi.org/10.1016/0921-5093(91)90441-O
  8. B. Huang, K. N. Ishihara and P. H. Shingu: Mater. Sci. Eng., A231 (1997) 72 https://doi.org/10.1016/S0921-5093(97)00041-5
  9. V. I. Fadeeva and A. V. Leonov: Mater. Sci. Eng., A206 (1996) 90
  10. K. W. Oh and K. S. Lee: J. Korean Inst. Met. Mater., 30 (1992) 611 (Korean)
  11. C. E. G. Bennt, N. A. McKinnon and L. S. Williams: Nature, 217 (1968) 1287 https://doi.org/10.1038/2171287a0
  12. I. Kondoh, T. Tanaka and N. Tamari: J. Cer. Soc. Japan., 102 (1994) 505 https://doi.org/10.2109/jcersj.102.505
  13. M. Tokita: J. Powder Tech. Jpn., 30 (1993) 790 https://doi.org/10.4164/sptj.30.11_790
  14. N. Tamari, T. Tanaka, K. Tanaka, I. Kondoh, M. Kawahara and M. Tokita: J. Ceram. Soc. Jpn., 103 (1995) 740 https://doi.org/10.2109/jcersj.103.740
  15. K. S. Cho, S. J. Kim, S. H. Baek, H. J. Choi and J. K. Lee: J. Korean Cer. Soc., 38 (2001) 687 (Korean)
  16. Y. Minamino, Y. Koizumi, N. Tsuji, N. Hirohata, K. Mizuuchi and Y. Ohkanda: Sci. Tech. Adv. Mater., 5 (2004) 133 https://doi.org/10.1016/j.stam.2003.11.004
  17. K. S. Cho and K. S. Lee: Key Engineer Mater., 287 (2005) 329 https://doi.org/10.4028/www.scientific.net/KEM.287.329
  18. J. R. Groza, S. H. Risbud and K. Yamazaki: J. Mater. Res., 7 (1992) 2643 https://doi.org/10.1557/JMR.1992.2643
  19. S. H. Risbud, J. R. Groza and M. J. Kim: Phil. Mag. B, 69 (1994) 525 https://doi.org/10.1080/01418639408240126
  20. S. H. Risbud, C. H. Sha, A. K. Mukherjee, M. J. KIm, J. S. Bow and R. A. Holl: J.Mater. Res., 10 (1995) 237 https://doi.org/10.1557/JMR.1995.0237
  21. N. Murayama: Bull. Ceram. Soc. Jpn., 32 (1997) 445
  22. M. Yishimura, T. Ohji, M. Sando and Y. Nihara: J. Mater. Sci. Lett., 17 (1998) 1389 https://doi.org/10.1023/A:1026476430465
  23. H. K. Lee, S. W. Lee and K. S. Cho: J. Korean Powder Metall. Inst., 12 (2005) 44 (Korean)
  24. J. S. Benjamin: Metall. Trans., 1 (1970) 2943
  25. J. H. Ahn, H. S. Chung, R. Watanabe and Y.H. Park: Mechanical Alloying, P. H. Shingu (Ed.), Proc. Inter. Symp. on Mechanical Alloying, (1991) 347
  26. S. K. Kang and R. C. Benn: Metall. Trans. A, 18 (1987) 747 https://doi.org/10.1007/BF02646916
  27. K. J. Oh, K. M. Kang, K. K. Cho, I. S. Ahn and S. J. Kim: J. Powder Metall. Inst., 1 (1994) 4 (Korean)