Effects of Blend Composition and Compatibilizer on the Mechanical Properties of Polypropylene/Acrylonitrile-Butadiene-Styrene Blends

블렌드 조성과 상용화제가 폴리프로필렌/ABS 블렌드의 기계적 물성에 미치는 영향

  • Park, Jung-Hoon (Department of Chemical and Biological Engineering, Korea University) ;
  • Sung, Yu-Taek (Department of Chemical and Biological Engineering, Korea University) ;
  • Kim, Woo-Nyon (Department of Chemical and Biological Engineering, Korea University) ;
  • Hong, John-Hee (R & D Division for Hyundai Motor Company & Kia Motors Corporation) ;
  • Hong, Byeong-Kwon (R & D Division for Hyundai Motor Company & Kia Motors Corporation) ;
  • Yoo, Tae-Wook (R & D Division for Hyundai Motor Company & Kia Motors Corporation) ;
  • Yoon, Ho-Gyu (Division of Materials Science and Engineering, Korea University)
  • 박정훈 (고려대학교 화공생명공학과) ;
  • 승유택 (고려대학교 화공생명공학과) ;
  • 김우년 (고려대학교 화공생명공학과) ;
  • 홍존희 (현대.기아자동차 연구개발본부) ;
  • 홍병권 (현대.기아자동차 연구개발본부) ;
  • 유태욱 (현대.기아자동차 연구개발본부) ;
  • 윤호규 (고려대학교 재료공학과)
  • Published : 2005.01.01

Abstract

Polymer blends containing polypropylene (PP) with compatibilizers were prepared using twin screw extruder. Physical properties were investigated using universal test machine (UTM) and Izod impact tester. In the PP/acrylonitrilebutadiene-styrene (ABS) blends, mechanical strength was increased with the addition of PP-g-styrene acryloritrile (PP-g-SAN) compatibilizer, and the ductility was increased with the addition of ethylene-ethyl acrylate-maleic anhydride (E-EAMAH-g-SAN) compatibilizer. For the PP/ABS/ polycarbonate (PC)/Nylon-6,6 blends, impact strength was increased with the addition of ethylene glycidylmethacrylate (E-GMA compatibilizer) up to 0.5 phr. In the case of the PP/ABS/PC/Nylon-6,6/poly(methyl methacrylate) (PMMA)/poly(oxymethylene) (POM)/poly(vinyl acetate) (PVC)/poly(butylene terephthalate) (PBT) blends, mechanical properties were increased by the complex compatibilizing effects of PP-g-SAN, E-EA-MAH-g-SAN and E-GMA, respectively.

폴리프로필렌(PP)을 포함한 고분자 블렌드에 상용화제를 첨가하여 이축압출기를 통해 시편을 제조하였으며, universal testing machine(UTM), lzod 충격 시험기를 사용하여 물성을 측정하였다. PP/acrylonitrile-butadiene-styrene(ABS) 블렌드의 경우, PP-g-styrene acrylonitrile(PP-g-SAN) 상용화제의 첨가에 의해 기계적 물성이 증가하였으며, ethylene-ethyl acrylate-maleic anhydride(E-EA-MAH-g-SAN) 상용화제의 첨가에 의해서 연성이 증가하는 결과를 나타내었다. PP/ABS/polycarbonate(PC)/Nylon-6,6 블렌드의 경우, ethylene glycidylmethacrylate(E-GMA) 상용화제를 0.5 phr 첨가함에 따라 충격강도가 증가하는 결과를 나타내었다. PP/ABS/PC/Nylon-6,6/poly(methyl methacrylate)(PMMA)/poly(oxymethylene)(POM)/poly(vinyl acetate)(PVC)/poly(butylenes terephthalate)(PBT) 블렌드에서 PP-g-SAN 같은 물리적 상용화제와 E-GMA 와 E-EA-MAH-g-SAN 같은 반응상용화제의 복합적인 작용으로 인해 블렌드의 기계적 물성이 증가된 결과를 나타내었다.

Keywords

References

  1. D. R. Paul and C. B. Bucknall, Polymer Blends, John Wiley & Sons, New York, 2000
  2. L. A. Utracki, Polymer Alloys and Blends, Hansen, New York, 1989
  3. J. Scheirs, Polymer Recycling, John Wiley & Sons, Chichester, 1998
  4. H. R. Brown, Macronwlecules, 22, 2859 (1989)
  5. C. Creton, E. J. Kramer, and G. Hadziioannou, Macrorrwlecules, 24, 1846 (1991)
  6. S. Kim, J. K. Kim, and C. E. Park, Polymer, 38, 1809 (1997)
  7. S. B. Chun and C. D. Han, Macromolecules, 33, 3409 (2000)
  8. B.Lowenhaupt and G.P. Hellmann, Colloid. Polym. Sci., 268, 885 (1990)
  9. A. Adedeji, A. M. Jamieson, and S. D. Hudson, Macromol. Chem. Phys., 197, 2521 (1996)
  10. C. Harrats, S. Blacher, R. Fayt, R. Jerome, and Ph. Teyssie, J. Polym. Sci., Polym. Phys. Ed., 33, 80 (1995)
  11. B. Heck, P. Arends, M. Ganter, J. Kressler, and M. Stuhn, Macronwlecules, 30, 4559 (1997)
  12. C. A. Dai, K. D. Jandt, D. R. Iyengar, N. L. Slack, K. H. Dai, W. B. Davidson, E. J. Kramer, and C. Y. Hui, Macromolecules, 30, 549 (1997)
  13. J. Noolandi and K. M. Hong, Macronwlecules, 17, 1531 (1984)
  14. W. N. Kim and C. M. Bums, Macromolecules, 20, 1876 (1987)
  15. W. N. Kim and C. M. Bums, J. Polym. Sci., Polym. Phys. Ed., 28, 1409 (1990)
  16. Y. S. Chun, J. H. Park, J. B. Sun, and W. N. Kim, J. Polym. Sci., Polym. Phys. Ed., 38, 2072 (2000)
  17. J. H. Park, W. M. Sung, J. C. Hyun, W. N. Kim, B. K. Hong, J. H. Hong, and Y. S. Lim, Polymer(Korea), 26, 53 (2002)
  18. S. S. Dagli, M. Xanthos, and J. A. Biesenberger, Polym. Eng. Sci., 34, 1720 (1994)
  19. W. Hale, H. Keskkula, and D. R. Paul, Polymer, 40, 365 (1999)
  20. W. Hale, L. A. Pessan, H. Keskkula, and D. R. Paul, Polymer, 40, 4237 (1999)
  21. K. Dedecker and G. Groeninckx, Polymer, 39, 4985 (1998)
  22. S. AI-Malaika, Reactive Modifiers for Polymers, Chapman & Hall, London, 1997
  23. L. E. Nielsen and R. F. Lande!, Mechanical Propenies of Polymers and Composites, Marcel Dekker, New York, 1994
  24. B.Wong, and W. E. Baker, ANTEC, 283 (1996)
  25. R. A. Kudva, H. Keskkula, and D. R. Paul, Polymer, 39, 2447 (1998)
  26. Y. J. Sun, G. H Hu, M. Lambla, and H. K. Kotlar, Polymer, 37, 4119 (1996)