A Study of auto-body panel correction of forming analysis that use One-step Forming method

One-step Forming 방법을 이용한 차체 판넬 성형해석에 관한 연구

  • 정동원 (제주대학교 기계공학과) ;
  • 황재신 (제주대학교 기계공학과 대학원)
  • Published : 2005.02.01

Abstract

Thin plate correction of forming process that it is nowadays smile change of simple contact surface as it becomes possible that forecast dictionary numerically exactly to analyze comparative big comp displacement real industry spot problems between complicated and abnormal curved line shapes and thin plate and die more reliable and need many efforts yet economical analysis method is required and develops this efficient algorithm. This research analyzes correction of forming and examined possibility and validity of spot application using One-Step Finite Element Method. Its application is being increased especially in the automotive industrial area for the cost reduction, weight saving, and improvement of strength.

Keywords

References

  1. Yang, D. Y., Jung, D. W., Song, I. S., Yoo, D. J. and Lee, J. H., 'Comparative investigation into implicit, explicit and iterative implicit/explicit schemes for the simulation of sheet-metal forming processes,' J. Materials Processing Technology, Vol .50, pp.39-53, 1995 https://doi.org/10.1016/0924-0136(94)01368-B
  2. Jung, D. W., Yang, D. Y., 'Step-wise combinded implicit/explicit finite element simulation of autobody stamping processes,' Journal of the Korean Society of Precision Engineering, Vol. 13, No.12, pp.86-98, 1996
  3. Lee, C. H. and Kobayashi, S., 'New solutions to rigid-plastic deformation problem s using a matrix method,' J. Eng. Ind., Trans. ASME, Vo1.95. pp 865-873, 1973
  4. Yoon, J. W., Kim, J. B. and Chung, K. , 'Elastic-Plastic Implicit Finite Element Method Considering Planar Anisotropy for Complicated Sheet Metal Forming Processes, ' J. KSTP, 1997
  5. Shim, H. B. and Yang, D. Y., 'An Elastic-Plastic Finite Element Analysis on Hydrostatic Bulging of Rectangular Diaphragms by using Layered Degenerated Shell Element,' Int. J. Mech. SDI., Vol. 32, pp. 49-64, 1990 https://doi.org/10.1016/0020-7403(90)90151-8
  6. Wang, N. M. and Tang, S. C., 'Analysis of Bending Effects in Sheet Forming Operations,' Int. J. for Num. Mech. in Engng., Vol. 25, pp. 253-367. 1988 https://doi.org/10.1002/nme.1620250119
  7. Mattiason, K., 'Numerical Simulation of Stretching Processes,' SIMOP-I, Editor Lange. K., Proc, of the 1. Int. Workshop, Stuttgart, 170-213, 1985
  8. Wang, N.M. and Budiansky, B., 'Analysis of Sheet Metal Stamping by a Finite Element Method,' Journal of Applied Mechanics, Vol. 45, pp.73-82, March 1978 https://doi.org/10.1115/1.3424276