References
- Slot, T. and O'Donnell, W. J., 'Effective Elastic Constants for Thick Perforated Plates with Square and Triangular Penetration Patterns,' J. of Engineering for Industry, Tran. ASME, Vol. 93, No. 4, pp. 935-942, 1971 https://doi.org/10.1115/1.3428087
- O'Donnell, W. J. and Porowski, J., 'Yield Surfaces for Perforated Materials,' J. of Applied Mechanics, Tran. ASME, Vol. 40, No.3, pp. 263-270, 1973
- Baik, S. C., Oh, K. H. and Lee, D. N., 'Analysis of the Deformation of a Perforated Sheet under Uniaxial Tension,' J. of Materials Processing Technology, Vol. 58, No.2, pp. 139-144, 1996 https://doi.org/10.1016/0924-0136(95)02096-9
- Baik, S. C., Han, H. N., Lee, S. H., Oh, K. H. and Lee, D. N., 'Plastic Behavior of Perforated Sheets under Biaxial Stress State,' Int. J. of Mechanical Sciences, Vol. 39, No.7, pp. 781-793,1997 https://doi.org/10.1016/S0020-7403(96)00091-4
- Theocaris, P. S., Stavroulakis, G. E. and Panagiotopoulos, P. D., 'Calculation of Effective Transverse Elastic Moduli of Fiber-Reinforced Composites by Numerical Homogenization,' Composites Sciences and Technology, Vol. 57, No.5, pp. 573-586, 1997 https://doi.org/10.1016/S0266-3538(97)00018-3
- Park, S. K., Kim, J., Chang, Y. C. and Kang, B. S., 'Analysis of the Deformation of a Perforated Sheet under Thermal and Tension Load Using Finite Element Method,' J. of. Materials Processing Technology, Vol. 113, No. 1, pp. 761-765,2001 https://doi.org/10.1016/S0924-0136(01)00696-3
- Kang, C. G. and Oh, J. K., 'An Evaluation of Three Dimensional Finite Element Model on the Strength Prediction of Particles Reinforced MMCs,' J. of KSPE, Vol. 15, No.6, pp. 124-138, 1998
- Meguid, S. A., Kalamkarov, A. L., Yao, J. and Zougas, A., 'Analytical, Numerical and Experimental Studies of Effective Elastic Properties of Periodically Perforated Materials,' J. of Engineering Materials and Technology, Tran. ASME, Vol. 118, No. 1, pp. 43-48, 1996 https://doi.org/10.1115/1.2805932
- Kalarnkarov, A. L., 'Analysis, Design, and Optimization of composite structures,' J. Wiley & Sons, New York, 1997
- Lee, J. H., 'Simplified Stress Analysis of Perforated Plates Using Homogenization Technique,' J. of the Computational Structural Engineering Institute of Korea, Vol. 8, No.3, pp. 51-58,1995
- Ghosh, S., Lee, K. and Moorthy S., 'Two Scale Analysis of Heterogeneous Elastic-Plastic Materials with Asymptotic Homogenization and Voronoi Cell Finite Element Model,' Comput. Methods Appl. Mech. Engrg., Vol. 132, No.1, pp. 63-116, 1996 https://doi.org/10.1016/0045-7825(95)00974-4
- Jang, J., Yoon, M. and Lee, J., 'Computation of Equivalent Material Properties of Woven Fabric Composites Using Homogenization Technique,' Tran. of KSME A, Vol. 22, No.3, pp. 588-594,1998
- Ohno, N., Wu, X. and Matsuda, T., 'Homogenized properties of Elastic- Viscoplastic Composites with Periodic Internal Structures,' Int. J. of Mechanical Sciences, Vol. 42, No.8, pp. 1519-1536, 2000 https://doi.org/10.1016/S0020-7403(99)00088-0
- Yun, S. H., 'The Finite Element Analysis for Calculation of Equivalent Elastic Constants Using the Homogenization Method,' J. of the Computational Structural Engineering Institute of Korea, Vol. 13, No. 1, pp. 51-61,2000
- Hassani, B. and Hinton, E., 'A Review of Homogenization and Topology Optimization II-Analytical and Numerical Solution of Homogenization Equations,' Computers and Structures, Vol. 69, pp.719-738,1998 https://doi.org/10.1016/S0045-7949(98)00132-1
- Anthoine, A., 'Derivation of the In-Plane Elastic Characteristics of Masonry through Homogenization Theory,' Int. J. Solids Structures, Vol. 32, No. 2, pp. 137-163, 1995 https://doi.org/10.1016/0020-7683(94)00140-R
- Chung, I., 'Evaluation of In-plane Effective Properties of Circular-Hole Perforated Sheet,' J. of KSPE, Vol. 21, No. 1, pp. 181-188,2004
- Slater, R.A.C., 'Engineering Plasticity,' The Macmillan Press LTD, London, UK, 1977
- Kraus, H., 'Creep Analysis,' John Wiley & Sons, New York, USA, 1980