References
- A. Levy and S. Macadam, The behavior of ceramic thermal barrier coatings on diesel engine combustion zone components, Surface Coating s Technology, 30(1987), pp. 51-61 https://doi.org/10.1016/0257-8972(87)90007-7
- B. Wang, Z. Shui and A. Levy, Sliding wear of thermallysprayed chromia coatings, Wear, 138(1990), pp. 93-110 https://doi.org/10.1016/0043-1648(90)90170-F
-
Y.H. Chae and S.S. Kim, Evaluation of wear characteristics for
$Al_2O_3-40%TiO_2$ sprayed on casted aluminum alloy, J of the KSTLE(Korea), vol. 15(1999), pp. 183 - Y.H. Chae and S.S. Kim, Sliding wear behavior of ceramic plasma sprayed on casting aluminum alloy against SiC ball, Tribology letters, vol. 8(2000), pp. 35 https://doi.org/10.1023/A:1019110512715
- Y. Wang, Y. Jin and S. Wen, The analysis of the chemical structure and properties of ceramic surface films in friction using SEM, AES and Micro-region X-ray diffraction, Wear, vol. 128(1988), pp. 277 https://doi.org/10.1016/0043-1648(88)90064-6
- S.J. Bull, R. Kingswell and K.T. Scott, The sliding wear of plasma sprayed alumina, Surface Coatings Technology, 82(1996), pp. 218 https://doi.org/10.1016/0257-8972(95)02641-X
- H.S. Ahn and O.K. Kwon, Wear behaviour of plasma-sprayed partially stabilized zirconia on a steel substrate, Wear 162-164(1993), pp. 636-644 https://doi.org/10.1016/0043-1648(93)90556-2
- H.S. Ahn, J.Y. Kim and D.S. Lim, Tribological behaviour of plasma sprayed ceramic coating for the application to the cylinder liner in engines, Korea Soc. Automotive Eng., 1(1993), pp.89-102
-
J.Y. Kim, D.S. Lim and H.S. Ahn, High temperature wear of plasma sprayed
$ZrO_2-Y_2O_3$ coatings, J. Korea Ceram. Soc., 30(1993), pp.1059-1065 -
Y. Wang, Y. Jin and S. Wen, The analysis of the friction and wear mechanisms of plasma-sprayed ceramic coating at
$450^{\circ}C$ , Wear 128(1988), pp.265-276 https://doi.org/10.1016/0043-1648(88)90063-4 -
Y.H. Chae and S.S. Kim, Tribological performance of
$Al_2O_3$ /NiCr coating, International J. of KSME, (2001), pp - U. Wiklund, J. Gunnars, S. Hogmark, Influence of residual stresses on fracture and delamination of thin hard coatings, Wear, 232(1999), pp.262-269 https://doi.org/10.1016/S0043-1648(99)00155-6
- T. Sato, S. Ohtaki and M. Shimada, Transformation of yttriapartially stabilized zirconia by low-temperature annealing in Air, J. Material Science, 20(1985), pp.1466-1470 https://doi.org/10.1007/BF01026344