References
- G. I., Barenblatt, 'The formation of equilibrium cracks during brittle fracture: General ideas and hypothesesaxially symmetric cracks,' Journal of Applied Mathematics and Mechanics, vol.23, 1959
- G. Camacho and M. Ortiz, 'Computational modeling of impact damage in brittle materials,' International Journal of Solids and Structures, Vol.33, 1996, pp.2899-2938 https://doi.org/10.1016/0020-7683(95)00255-3
- D.S. Dugdale., 'Yielding of steel sheets containing slits,' Journal of the Mechanics and Physics of Solids, Vol.8, 1960
- M. Elices, G.Y. Guinea, J. Gomez and J. Planas, 'The cohesive zone model: advantages, limitation and challenges,' Engineering Fracture Mechanics, Vol.69, 2002, pp.137-163 https://doi.org/10.1016/S0013-7944(01)00083-2
- A. Hillerborg, M. Modeer, and P.E. Petersson, 'Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements,' Cements and Concrete Research, Vol.6, 1976, pp.773-782 https://doi.org/10.1016/0008-8846(76)90007-7
- J.-M. Honberg, Concrete joints, Mechanics of Geomaterial Interfaces, A.P.S. Selvadurai and M.J. Boulon(Eds), 1995
- B. Karihaloo, Fracture mechanics and structural concrete, Concrete Design and Construction Series, UK, 1994
- M. Kachanov, 'Effective elastic properties of cracked solids: Critical review of some basic concepts,' Appl. Mech. Rev., Vol. 45, No.8, 1992, pp.304-335 https://doi.org/10.1115/1.3119761
- D. Kincaid and W. Cheney., Numerical analysis: Mathematics of scientific computing, Brooks/Cole, New York, 2002, pp.1-788
- H.R. Lotfi and P.B. Shing, 'Interface model applied to fracture of masonary structures,' Journal of Structural Engineering, Vol. 120, 1994, pp.62-80
- J.G.M. van Mier and M.R.A. van Vliet, 'Uniaxial tension test for the determination of fracture parameters of concrete: State-of-the-Arts,' Engineering Fracture Mechanics, Vol.69, 2000, pp.235-247
- A Needleman, 'A continuum model for void nucleation by inclusion debonding,' Journal of Applied Mechanics, No.54, 1987, pp.525-531 https://doi.org/10.1115/1.3173064
- D. Ngo and AC. Scordelis, 'Finite element analysis of reinforced concrete beams,' ACI journal, 1967, pp.152-163
- J. Planas, M. Elices, G.Y. Guinea, F.J. Gomez, D.A. Cendon and I. Arbilla, 'Generalizations and specializations of cohesive crack models,' Engineering Fracture Mechanics, Vol.70, 2003, pp.1759-1776 https://doi.org/10.1016/S0013-7944(03)00123-1
- A Griffith, 'Theory of rupture,' In Proc. 1st Int. Congress on Appl. Mech., Delft, The Netherlands, 1924, pp.55-63
- I. Rhee and W. Kim, 'Analysis of shear behavior of lightweight reinforced concrete beam using interface elements,' Journal of Korean Society of Civil Engineers, In press, 2006
- I. Rhee, H.U. Lee, I.S. Lee, and W. Kim, 'Failure analysis of reinforced concrete bridge column using interface elements,' I st International Conference on Advanced Nondestructive Evaluation, Jeju International Conference Center, Korea, Nov. 7th -9th 2005, 136pp
- G. Ruiz, A. Pandolfi and M. Ortiz, 'Three dimensional cohesive modeling of dynamics mixed mode fracture,' International Journal for Numerical Metlwds in Engineering, Vol.52., No.1-2, 2001, pp.97-120 https://doi.org/10.1002/nme.273
- I. Scheider, Cohesive model for crack propagation analyses of structures with elastic-plastic material behaviors, GKSS Research Center, Geesthacht, WMS 2001, pp.1-41
- J.C.J. Schellekens and R. de Borst, 'On the numerical integration of interface elements,' International Journal for Numerical Methods in Engineering, Vol.36, No.7, 1993, pp.43-66 https://doi.org/10.1002/nme.1620360104
- M.G.A. Tijssens, On the cohesive surface methodology for fracture of brittle heterogeneous solids, Ph.D. thesis, Technische Universiteit Delft, 2001, pp.1-110
- T. Stankowski, Numerical simulation of progressive failure in particle composites, Ph.D. thesis, University of Colorado at Boulder, 1990, pp1-118
- V. Tvergaard, 'Cohesive zone representations of failure between elastic or rigid solids and ductile solids,' Engineering Fracture Mechanics, Vol.70, 2003, pp.1859-1868 https://doi.org/10.1016/S0013-7944(03)00128-0
- K. Willam, I. Rhee, and Y. Xi, 'Thennal Degradation of Heterogeneous Concrete Materials,' Journal of Materials in Civil Engineering, ASCE, Vol. 17, 2005, pp.276-285 https://doi.org/10.1061/(ASCE)0899-1561(2005)17:3(276)
- K. Willam, I. Rheem, and B. Shing, 'Interface damage model for thermomechanical degradation of heterogeneous materials,' Computer Methods in Applied Mechanics and Engineering, Vol.193, 2004, pp.3327-3350 https://doi.org/10.1016/j.cma.2003.09.020
- K. Willam, T. Stankowski, K. Runesson, and S. Sture, 'Simulation issues of distributed and localized failure computations,' Proceedings on Cracking and Damage-Strain Localization and Size Effects, Mazars, J. and Bazant, Z. Eds., Elsevier Applied Sciences, London and New York, 1990, pp.363-378
- K. Willam, 'Constitutive models for engineering materials,' Encyclopedia of Physical Science and Technology, Third Edition, Vol.3, Academic Press, 2002, pp.603-633
- X-P. Xu and A. Needleman, 'Numerical simulations of fast crack growth in brittle solids', Journal of Mechanics and Physics for Solids, Vol.42, No.9, 1994, pp.1397-1434 https://doi.org/10.1016/0022-5096(94)90003-5
- NW-IALAD, Tg2: Continuum based material problems for dam concrete, European Research Network, 2004, website: http://nw-ialad.uibk.ac.at/Wp2/
- Department of Aerospace Engineering and Science, FEM-C++: A totally objected oriented program for finite element modeling, University of Colorado at Boulder, 2004, pp.1-200
- K. Duan, X.Z. Hu and F.H. Wittmann, 'Boundary effect on specific fracture energy of concrete', Fracture Mechanics of Concrete Structures, Vol. 1, Conference Proceedings of FRAMCOS-5, Vail CO, USA 2004, pp.205-212
Cited by
- Failure Analysis of Reinforced Concrete Bridge Column Using Cohesive and Adhesive Interfaces vol.321-323, pp.1662-9795, 2006, https://doi.org/10.4028/www.scientific.net/KEM.321-323.716