Journal of the Korean institute of surface engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지

A Reliability Test for ph-free SnCu Plating Solution and It's Deposit

Sn-Cu 무연 도금용액 및 피막의 신뢰성평가

  • Lee Hong-Kee (Korea Institute of Industrial Technology, Nano Surface Technology Team) ;
  • Hur Jin-Young (Korea Institute of Industrial Technology, Nano Surface Technology Team)
  • Published : 2005.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Pb-Free Technology was born with environmental problems of electronic component, Being connected by big and small project of every country. Also, in each country environment is connected and various standards of IEC, ISO, MIL, JIS, KS, JEDEC, EIAJ etc. All products can divide at solder part and finishing part These can tested each and synthetically divide. This research is reliability evaluation for three kind of ph-free SnCu solder plating solution and it's deposit. First, executed analysis about Pure Sn, SnCu solutions and plating surface by way similar to other plating solution analysis. Next, executed reliability about test method and equipment for reliable analyzer system construction. Next, data comparison and estimation, main estimation test method and item's choice. In this paper the systematic surface analysis and reliability for plating solutions and it's deposit in metal surface finishing processes could be shown.

Keywords

References

  1. 무연솔더합금(전자부품연구원-이호영)
  2. Pb-free화의 진행현황 및 작업성/신뢰성 평가(2002 김우영 外2)
  3. 플립칩용 Sn-Cu 전해도금 솔더 범프의 형성 연구 (2003, 정석원 外3)
  4. 무연도금 솔더의 특성연구 : Sn-Cu 및 Sn-Pb 범프의 비교(2003, 정석원 外1)/
  5. 땜납도금 대체 레드프리 주석-동 합금도금기술(2001)
  6. 금속간 화합물의 성장과 그 영향(2001)
  7. 리드프리 솔더링기술(2002)
  8. 솔더접합부에 대한 기계적 스트레스 평가(2002, 삼성전자)
  9. 유해물질 사용제한에 따라 무연솔더링 공정으로 생산된 전자제품의 신뢰성 확보 방안(송병석 外1)
  10. 전자제품의 Pb 규제 대응현황(2003, 전자부품연구원)
  11. 최근 Pb-Fee soldering joint의 신뢰성 평가 사례 (APRO)
  12. Electromigration and Solid State Aging of Flip Chip Solder Joints and Analysis of Sn Whisker on Lead-Frame(2001, TaeKyeng Lee)
  13. MEMS 패키징과 신뢰성(전자부품연구원)
  14. Pb-free 솔더링 기술의 고도화(2002, LG전자)
  15. Pb-free 솔더링 평가기술(2003, LG전자)
  16. Pb-free Technology(2003. 삼성전자)
  17. About Pb-Free (2003, AUK)
  18. Reliability Evaluation of Lead Free Solder Joints in Electronic Packaging(2003, KAIST)
  19. 반도체 소자 배선 및 실장용 Cu-Sn 합금 도금막의 특성(김주연)
  20. 솔더 및 솔더링부 시험과 검사(2002, 강경인 外4)
  21. 납땜기초이론 및 연구사례(전자부품연구원)
  22. Development of Cu-Sn Intermetallic Compound at Pb-free Solder/Cu Joint Interface(2003, Xin Ma 外3)
  23. Interfacial Reactions between Sn0.4Cu Solder and Cu Substrate(2005, Jeong-Won Yoon 外1)
  24. Six Cases of Reliability study of Pb-free Solder Joints in Electronic Packaging Technology(2002, K.Zeng 外1)
  25. Thermodynamic Analysis of Influence of Pb Contamination on Pb Free Solder Joints Reliability (2003, Xianzhang Zeng)
  26. Report on Lead-Free Surface Finish of Semiconductor Terminals(JEITA)
  27. Parts for Achieving Lead-free Soldering(2000, Nakamura 外4)
  28. JIS Z 3198-3-7
  29. Evaluation Ionic Migration in Lead-free Solder Using the Quartz Crystal Microbalance Method (Hirokazu Tanaka 外4)
  30. Factors Leading to Ionic Migration in Lead-free Solder
  31. Investigation of Migration on PCB(Kaichi TSURUTA 外2)
  32. Investigation of Ion Migration Processes on PCB by Quartz Crystal Microbalance(Sachio YOSHIHARA)
  33. 압전소자(Quartz Crystal Microbalance)에 대한 이론과 응용(2000, 윤규식)
  34. 부품소재 신뢰성향상지원사업 workshop자료(2004)